Huawei B311 Bedienungsanleitung
Quick Start Guide
Schnellstartanleitung
Stručný návod k obsluze
Ghid de pornire rapidă
Guia de Início Rápido
Guía de inicio rápido
Contents
English................................................................................................................................................1
Deutsch............................................................................................................................................ 11
Čeština............................................................................................................................................. 22
Română............................................................................................................................................33
Português.........................................................................................................................................43
Español.............................................................................................................................................54
i
Product overview
Power indicator Network status indicator
Wi-Fi® indicator LAN/WAN indicator
Signal strength indicator SIM card slot
WPS button Power button
Reset button Power input
LAN/WAN port Landline phone port
English
1
Getting Started
Step 1: Installing the SIM card
3
Choose the correct SIM card and insert it into the SIM card slot as shown in the preceding diagram and then
connect the power adapter to the router. The router will turn on automatically and search for available mobile
networks.
Indicators:
Network status indicator
Cyan/blue/yellow: Connected to an LTE/3G/2G
network.
Signal strength indicator
White: More signal bars indicate a stronger signal.
Do not insert or remove a SIM card when the router is running, as this may affect performance or
damage the SIM card.
2
Step 2: Connecting to your router's Wi-Fi network
Wi-Fi Name: ................
Wi-Fi Password: ..........
abcdefg
XXXXXXXX
XXXXXXXX
Wi-Fi Password:YYYYYYYY
Wi-Fi Password：
YYYYYYYY
Once the router has connected to a mobile data network, you can connect your computer or mobile phone to
the router's Wi-Fi network to access the Internet. Please refer to the label on the bottom of the router for the
default Wi-Fi network name (Wi-Fi Name ) and password (Wi-Fi Password ).
lWhen the Wi-Fi indicator is steady on, Wi-Fi is enabled. To enable or disable Wi-Fi, refer to the
router's web-based management page.
lEnsure that you promptly change the Wi-Fi network name and password on the web-based
management page to prevent unauthorized access to your Wi-Fi network. Once you have changed
the password, you will need to reconnect to the router's Wi-Fi network.
3
Managing your router
You can manage the router using the web-based management page. Please refer to the label on the bottom
of the router for the default IP address, password and so on.
More information can be found in the web-based management page.
lEnsure that you promptly change the default login password for the web-based management page
to prevent unauthorized users from changing the router's settings.
lYou can also manage your router using the HUAWEI SmartHome App. Scan the QR code below
to download.
4
Optional congurations
The features described in this section are for reference purposes only. Your router may not support all of these
features.
Connecting multiple devices
You can connect a computer, or landline phone to the router to access the Internet, make telephone calls, and
more.
Accessing the Internet through an Ethernet port
You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the
Internet.
Congure the relevant settings on the web-based management page before connecting to the Internet
through an Ethernet port. For details, please contact your carrier.
5
6
FAQs
How do I restore factory settings?
When the router is turned on, press the Reset button for approximately 3 seconds using a pointed object until
the Power indicator starts to blink. Restoring factory settings will restore the settings to the default. You
can recongure them after the router is restored.
What should I do if I forgot the Wi-Fi password or the login password for the web-
based management page?
Restore the router to its factory settings and then use the default Wi-Fi password and login password to try
again.
What should I do if the Network status indicator is red or an Internet connection
cannot be established?
1Check if the SIM card is inserted. Refer to the Getting Started section for the right size of SIM card and the
right way to insert it into the slot.
2If the issue persists, restore the router to factory settings and try again.
3Contact your carrier to check if your SIM card is out of service. If it's a new card, check if it has been
activated.
What should I do if the Internet speed is slow?
1Check the Signal strength indicator on the router. If it shows weak signal , adjust the router's direction
or move it close to a window to improve signal reception.
2If your device is connected to the router over Wi-Fi, adjust your device's position to receive better signal.
3Restart the router and your device, and try again.
4Check if you have reached your data trafc limit for the month. If so, your carrier may limit your Internet
speed.
How can I connect to the router using WPS (Wi-Fi Protected Setup)?
To connect a WPS-enabled device to your router using the WPS button:
1Press and hold the WPS button on the router for at least 2 seconds and then release, the indicator starts
to blink.
2Enable WPS on your device within 2 minutes to connect to the router's Wi-Fi network.
Why can't I access the router's web-based management page?
1Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.
2Ensure that your computer is set to obtain an IP address and DNS server address automatically.
3Restart your browser, or try using another browser.
4If the problem persists, restore the router to its factory settings.
Why is the content displayed on the web-based management page not up to date?
Depending on your browser's cache, the content for your device on the web-based management page may
not be up to date. Manually clear your browser's cache (for example, open your browser and choose Internet
Options > General > Browsing history > Delete.) and re-launch the web-based management page.
If you are experiencing any other issues with the router:
1Restart the router.
2Restore the router to its factory settings.
3Contact your carrier.
7
Inhaltsverzeichnis
Sprachen:
Andere Huawei Netzwerk-Router Handbücher
Huawei
Huawei E5170s-22 Bedienungsanleitung
Huawei
Huawei HG532D Bedienungsanleitung
Huawei
Huawei WS8800 Bedienungsanleitung
Huawei
Huawei AR550-8FE-D-H Bedienungsanleitung
Huawei
Huawei WiFi AX3 Bedienungsanleitung
Huawei
Huawei V300R005 Bedienungsanleitung
Huawei
Huawei ADSL2+Broadband Router Aolynk DR814 Bedienungsanleitung
Huawei
Huawei NE05E Bedienungsanleitung
Huawei
Huawei AR600 Series Bedienungsanleitung
Huawei
Huawei AR1200 Series Bedienungsanleitung
Huawei
Huawei Quidway S8500 Series Bedienungsanleitung
Huawei
Huawei AR100 Series Bedienungsanleitung
Huawei
Huawei E586BS-6 Bedienungsanleitung
Huawei
Huawei AR100 Series Betriebsanleitung
Huawei
Huawei EG8143A5 Bedienungsanleitung
Huawei
Huawei HG658 Bedienungsanleitung
Huawei
Huawei CX210 Kurzanleitung
Huawei
Huawei V200R001 Bedienungsanleitung
Huawei
Huawei B683 Bedienungsanleitung
Huawei
Huawei Quidway NetEngine80E Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise