Huawei SmartAX MA5671 Bedienungsanleitung

SmartAX MA5671 Desktop

Multi-service Access Equipment

Quick Start

1 Safety Precautions

To use the device properly and safely, read the safety precautions carefully before using

the device and strictly observe these precautions when using the device.

Safety precautions:

Do not look into the optical port without eye protection.

Keep the device out of the reach of children as the components or accessories may be

swallowed.

Install the device in strict compliance with the requirements of the supplier. Reserve

a space of at least 10 cm above and around the device for heat dissipation. During the

installation, keep the device away from heat or water sources, and electric appliances

that generate strong magnetic or electric fields, such as microwave ovens,

refrigerators, and mobile phones.

The power supply voltage of the device must meet the requirements on the input

voltage of the device.

Do not use any power adapters that are not in the standard configuration. Otherwise,

the device may malfunction or be unsafe.

Dry your hands before connecting or disconnecting cables. Stop the device and

switch the device off before connecting or disconnecting cables.

Do not place any object on the device, preventing the device from being damaged

due to overheating or deformation.

Prevent objects, such as metal or water, from entering the device through the heat

dissipation hole.

Switch the device off and disconnect all cables, including the power cable, network

cable, and phone cable, during periods of lightning activities.

Do not lead the strength member of the optical fiber or other metal parts indoors. Do

not connect network cables, phone cables, power adapters, or power adapter cables

outdoors, preventing device damage and bodily injuries that are prone to occur

during thunderstorms.

If an abnormality occurs, for example, liquid entering the device, smoke, unusual

sound, and smell, immediately stop the device, switch the device off, disconnect all

cables (such as the power cable, optical cable, and network cable) from the device,

and contact the authorized service center.

Do not disassemble the device without permission. In the event of a device fault,

contact the authorized service center.

Dispose of packing materials and old/abandoned devices in accordance to local laws

and regulations (recycling them is strongly recommended).

Do not change the structure, safety design, or performance design of the device

without prior authorization.

Fireproof precautions:

Keep the device away from large heat source equipment, bare flames, and

high-power devices, such as electric heaters, candles, and blow drier, to eliminate

safety risks.

Replace deteriorated cables or power socket facilities on the power supply line or

near the device in a timely manner to eliminate safety risks.

2 Installing the MA5671

NOTE

Do not install the MA5671 outdoors or in an outdoor cabinet.

The MA5671 can be horizontally placed on a workbench or mounted onto a wall. Do not

install the MA5671 in other modes, such as mounted to the ceiling.

Horizontally Placed on a Workbench

The following figure shows the MA5671 horizontally placed on a workbench.

Mounted onto a Wall

Step 1 Mark the positions of two holes (with a space the same as that between wall-mounting

holes) used for mounting the MA5671.

Step 2 Select a proper drill according to the outer screw diameter. Use a hammer drill to drill the

marked positions on the wall. Then, clean the wall and install two expansion bolts.

Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads of the

screws 3 mm over the wall. Then, mount the MA5671 to the screws.

NOTE

The tools and installation materials involved in the preceding installation steps must be

provided by customers.

3 Connecting Cables

Performing the Following Steps to Connect the MA5671 to Each Product

Based on the Preceding Cable Connections

Step 1 Use an optical fiber to connect the OPTICAL port on the MA5671 to the optical port in

the wall.

NOTE

The optical fiber connector connected to the OPTICAL port must be of the SC/UPC type.

The bending radius of optical fibers must be greater than 30 mm in optical fiber

deployment for proper optical fiber running.

Step 2 Use an Ethernet cable to connect the LAN port to network port on the PC or IP set top

box (STB).

Step 3 Use a power adapter to connect the POWER port to the power socket.

Step 4 Press ON/OFF to switch the MA5671 on.

4 Logging In to the Web Page

Performing the Following Steps to Log In to the MA5671's Web Page

Step 1 Set the IP address of the PC to be in the same network segment as the management IP

address of the MA5671. For example:

IP address: 192.168.100.100

Subnet mask: 255.255.255.0

NOTE

The default management IP address and subnet mask of the MA5671 are as follows:

IP address: 192.168.100.1

Subnet mask: 255.255.255.0

Step 2 Enter the management IP address of the MA5671 in the address bar of the browser and

press Enter.

Then, the login window is displayed.

Step 3 In the login window, enter the user name (telecomadmin) and password (default:

admintelecom), select a web page language, and click Login.

After the password is authenticated, the MA5671's web page is displayed.

If you perform no operation within 5 minutes after logging in to the web page, the

MA5671 automatically returns to the login page.

The MA5671 is automatically locked if you incorrectly enter the user name or password

for three consecutive times and will be unlocked in 1 minute.

After logging in to the web page using the initial user name and password, change the

5 Indicators

Table 5-1 Indicator status description (1)

Indicator

Status

Description

POWER

Steady green

The MA5671 is powered on.

Off

The MA5671 is powered off.

Indicator

Status

Description

PON

See Table 5-2.

LOS

See Table 5-2.

LAN1 through LAN4

Steady on

The Ethernet ports are properly

connected.

Blinking

The Ethernet ports are transmitting or

receiving data.

Off

The Ethernet ports are disconnected.

Both PON and LOS indicators indicate the status of the MA5671 in connecting to and

registering with the optical line terminal (OLT) of the service provider. Table 5-2

describes the status of the PON and LOS indicators.

Table 5-2 Indicator status description (2)

No.

Status

Description

PON

LOS

Off

The MA5671 has been prohibited

by the OLT.

Blinking twice

one second

Off

The MA5671 is attempting to

connect to the OLT.

Steady on

Off

The MA5671 has connected to

the OLT.

Off

Blinking once two

seconds)

The RX optical power of the

MA5671 is lower than the optical

receiver sensitivity.

NOTE

According to Class B+, the optical

receiver sensitivity is –28 dB. If the

RX optical power of the MA5671

is less than –28 dB, the MA5671

fails to go online sometimes. The

LOS indicator blinks until the

MA5671 goes online.

Blinking twice

one second

Blinking twice

one second

The MA5671 is a rogue ONU

detected by the OLT.

NOTE

This function is available only

when the MA5671 uses GPON

upstream transmission.

Blinking once

two seconds)

Blinking once two

seconds)

The hardware is faulty.

6 FAQs

The LOS indicator is blinking.

If the LOS indicator blinks once two seconds, check whether the pigtail is securely connected

and whether the optical connector is clean.

If the MA5671 blinks twice a second, check whether it is a rogue ONU.

The PON indicator is off.

Check whether the optical fiber is securely connected to the OPTICAL port.

The MA5671 fails to register with the OLT. Contact the service provider for help.

How can I reset the MA5671?

Press Reset using a needle-type object.

How can I restore factory defaults?

Press Reset using a needle-type object for longer than 10s to restore factory defaults and reset

the MA5671. If this indicator is off and then on, the MA5671 restarts successfully.

7 Technical Specifications

Item

Specifications

Weight (including the power adapter)

About 700 g

Power supply for the integrated device

12 V DC, 1 A (European/British

standard)/2 A (American standard)

Power adapter input

European standard:

90–264 V AC, 50–60 Hz

British/ American standard:

90–270 V AC, 50–60 Hz

Operating temperature

0°C to +40°C

Operating humidity

5% to 95%, non-condensing

Warranty Card

Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please

read this warranty card carefully, fill in the required information, and preserve this card

in good condition.

PERSONAL OR COMPANY

FULL NAME

Address/Postal Code

Telephone Number

Product Type

Product Serial Number

Purchase Date

Invoice Number

Dealer's Name

Dealer's Address

Dealer's Telephone

Preserve well. No reissue.

Dealer's Seal

Inhaltsverzeichnis

Andere Huawei Drahtloser Zugangspunkt Handbücher

Huawei

Huawei AP6510DN-AGN-US Bedienungsanleitung

Huawei

Huawei RTN510 Bedienungsanleitung

Huawei

Huawei U-SYS IAD208E Bedienungsanleitung

Huawei

Huawei AP7050DE Technische Daten

Huawei

Huawei Quidway WA1003A Bedienungsanleitung

Huawei

Huawei B2338-168ODU Bedienungsanleitung

Huawei

Huawei AP5030DN Technische Daten

Huawei

Huawei Quidway W1000 Series Bedienungsanleitung

Huawei

Huawei eLTE2.2 eA660 Series Technische Daten

Huawei

Huawei HES-319M Bedienungsanleitung

Huawei

Huawei Quidway WA1003A Bedienungsanleitung

Huawei

Huawei AP3010DN-AGN Bedienungsanleitung

Huawei

Huawei WA603DE Bedienungsanleitung

Huawei

Huawei UA5000 Bedienungsanleitung

Huawei

Huawei E5186 Bedienungsanleitung

Huawei

Huawei OptiXstar P812E Bedienungsanleitung

Huawei

Huawei OptiX RTN 310 Bedienungsanleitung

Huawei

Huawei AP4050DN-E Technische Daten

Huawei

Huawei AP7052DN Betriebsanleitung

Huawei

Huawei 5G CPE WiN Bedienungsanleitung

Huawei

Huawei AP3010DN-AGN Technische Daten

Huawei

Huawei OptiXstar P602E Bedienungsanleitung

Huawei

Huawei WA635SN-GN Bedienungsanleitung

Huawei

Huawei WA8021V5 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung