Hunter 44033-01 44272 Bedienungsanleitung

Owner’s Manual

Models

44272

44277

Form# 44033-01

20100511

English

5-1-1Programmable

Weekdays-Saturday-Sunday

I N S T A L L A T I O N

5 MINUTE

44033-01 • 05/11/2010

Table Of Contents

At A Glance

Know Your ermostat ....................................................3

Setup

Setting Day and Time .....................................................10

Scheduling

Scheduling Introduction ..................................................12

Setting Your Schedule .....................................................14

Temporary Temperature Change ..........................................18

Turning Oﬀ Scheduling ...................................................20

Save Away .................................................................22

Features

Alerts .....................................................................24

Menu Options ............................................................28

Additional Features .......................................................32

ermostat Assistance

Troubleshooting and Support .............................................33

Technical Support .........................................................35

Warranty

1 Year Guarantee ..........................................................36

Your thermostat has been pre-programmed from the factory with no programming

necessary. We recommend using these pre-programmed settings for a few days

before altering them as they offer maximum energy saving benets. If you

do decide to alter your programs, use the charts on page 13 to write out your

scheduled times and temperatures. After you have recorded your preferences,

follow the instructions on page 14 to alter your temperature settings.

There is no need to program the thermosat at the wall where it is mounted to!

Remove the thermostat from the backplate by gripping the sides rmly and pulling

it straight off. This allows you to program the thermostat in comfort.

After you have programmed your thermostat, no other setting changes are

necessary unless you wish to browse through the menu to see how you may

further adjust the independent settings of your thermostat to meet your lifestyle.

The features section starting on page 28 of this manual will describe these settings.

Most settings have been preset for optimal performance.

If you need any assistance with installion or setup of your new

Hunter Thermostat, please call us, our technical support staff is

ready to help!

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am

to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet

at:

www.hunterfan.com

3Know Your ermostat

At A Glance

44033-01 • 05/11/2010

At A Glance

1. Enters Schedule Setup for altering scheduled programs.

2. Sets the Save Away feature for when you will not be home during a regularly

programmed time.

3. Conrms completion of an action or returns you to the Home screen.

4. Allows access to the advanced features of the thermostat.

5. Moves you forward or backward while setting up features or schedules.

6. Adjusts time and temperature settings as well as moving up or down menu

lists.

7. Indicates whether the system is set to Heat, Cool, or Off.

8. Shows if the fan is set to Auto or On modes.

9. Allows you to switch between Heat, Cool, and Off modes.

10. Allows you to switch between fan Auto and On modes.

Know Your ermostat

At A Glance

Save

Away

Schedule

Back Done/

Home Menu Next

910

Know Your ermostat

44033-01 • 05/11/2010

1. Holds 2 “AA” Batteries.

2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based

on the type of system you have.

3. Allows your thermostat to operate your HVAC system* properly by indicating

the system type that you have.

*Conventional System: Uses a condensing unit for cooling and a

separate furnace system for heating.

*Heat Pump System: Uses the condensing unit for both heating and

cooling.

NOTE: If you are unsure of your system type it may be necessary to

contact our technical support department at 1-888-830-1326, your

HVAC manufacturer, or a local HVAC technician to determine this.

Improper selection of your system type could cause the thermostat to not

operate your system properly.

At A Glance

Know Your ermostat

At A Glance

3Know Your ermostat

44033-01 • 05/11/2010

At A Glance

1. Shows the current day of the week or weekend.

2. Indicates the thermostat is running in schedule mode.

3. Will show when your heat pump or system is reporting a problem to

the thermostat.

4. Indicates the current room temperature.

5. C will display when in Celsius mode. Nothing will display when set

to Fahrenheit.

6. Flashes when the furnace lter should be checked for replacement.

7. On when the current schedule period is running.

8. Indicates the current active schedule period.

9. Low battery warning, replace the batteries in the thermostat.

10. Indicates the fan is running when displayed.

11. Shows the current mode of the fan, Auto or On.

12. Indicates the current time in am(A) or pm (P).

13. On when the current operating mode, heat or cool, is running.

14. Current operating mode, heat or cool.

15. Indicates the thermostat is running in save away mode.

16. Current Set temperature the thermostat is scheduled to run.

Know Your ermostat

At A Glance

Wed

Auto

Filter

10:05

At Home

Heat to

Know Your ermostat

44033-01 • 05/11/2010

Setup

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the

current day and time.

1. You will notice that “Mon” will be ashing at the top left of your screen.

Use the or buttons to move to your current day of the week and

press the Next button to advance to the next step.

2. Use the or button to change between am(A) and pm(P). Choose

Next to advance.

3. Next you will select your current hour by using the or buttons.

The Next button advances you to the next step.

4. Set your minutes using the or and press Done/

Home to nish or Back if

you need to make a correction to a previous step.

5. When nished, the thermostat will show “Updated!” to conrm your

settings are saved.

6. Your thermostat will next prompt you to set your programming, see

page 14 step 2 if you wish to alter your programs at this time.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hunter Thermostat Handbücher

Hunter

Hunter 40170 Bedienungsanleitung

Hunter

Hunter 40135 Bedienungsanleitung

Hunter

Hunter 42999 Bedienungsanleitung

Hunter

Hunter 44760 Bedienungsanleitung

Hunter

Hunter 44550 Bedienungsanleitung

Hunter

Hunter 42710-01 Bedienungsanleitung

Hunter

Hunter 40135 Bedienungsanleitung

Hunter

Hunter Auto Temp Plus 44422 Bedienungsanleitung

Hunter

Hunter 42122 Bedienungsanleitung

Hunter

Hunter Energy Monitor AC 42205 Bedienungsanleitung

Hunter

Hunter 42205 Bedienungsanleitung

Hunter

Hunter 42711-01 Bedienungsanleitung

Hunter

Hunter 44360 Bedienungsanleitung

Hunter

Hunter 42999 Bedienungsanleitung

Hunter

Hunter 44050 Bedienungsanleitung

Hunter

Hunter 42177 Bedienungsanleitung

Hunter

Hunter 40135 Bedienungsanleitung

Hunter

Hunter Internet Thermostat Bedienungsanleitung

Hunter

Hunter 40135 Bedienungsanleitung

Hunter

Hunter 44377 Montageanleitung

Hunter

Hunter 44272 Bedienungsanleitung

Hunter

Hunter 44360 Set & $ave Bedienungsanleitung

Hunter

Hunter 44259 Bedienungsanleitung

Hunter

Hunter 44428 Originalbetriebsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung