Huvitz HNT-1 Betriebsanleitung

Field Application Department2018 . 10 . 02 (r1) 1/63

HNT-1/1P

Troubleshooting

Field Application Department2018 . 10 . 02 (r1) 2/63

Contents

1. Auto Tracking issue

2. Data issue

3. Connection with HRK MATE

4. Assembly & Disassembly

5. Upgrade the software

6. Engineer Setup Mode

Field Application Department2018 . 10 . 02 (r1) 3/63

1. Auto Tracking issue

[HNT-1/1P] Auto Tracking issue

Field Application Department2018 . 10 . 02 (r1) 4/63

1) Specification comparisons

MANUFACTURER NIDEK HUVITZ

PRODUCT NT-530P HNT-1/1P

Motor

Working Range

Y: ±15mm

X: ±5mm

Z: ±5mm

Y: ±15mm

X: ±5mm

Z: ±5mm

2) Working Range

HNT-1 and 1P movement range is same with NIDEK’s

tonometer.

(Y: ±15mm, X: ±5mm, Z: ±5mm)

[HNT-1/1P] Auto Tracking issue

Field Application Department2018 . 10 . 02 (r1) 5/63

3) Focus Indicator

If the main body unit get out of the working range of auto tracking in the forward and backward, right and left, up

and down, the indicator is displayed.

Move the joystick lever toward the patient

Move the joystick lever toward the operator

Move up by rotating the joystick lever to the

clockwise

Move down by rotating the joystick

lever to

the counter clockwise

Move the joystick lever to the left

Move the joystick lever to the right

[HNT-1/1P] Auto Tracking issue_Focus Indicator

Field Application Department2018 . 10 . 02 (r1) 6/63

- We provide the quick guide in the product box to minimize any issues that occur during

installation from the 11th of June, 2018

Reference

[HNT-1/1P] Auto Tracking issue_Quick guide

Field Application Department2018 . 10 . 02 (r1) 7/63

4) Upgrade the Software to the latest version (Over V1.0.4)

※ We highly recommend you to upgrade the software to the latest version (Over V1.0.4).

Improvement History

1. Stabilized the Auto-Tracking

2. Stabilized the pachymetry for measuring and image

3. Stabilized the movement of chinrest to avoid being stuck at bottom side

4. Added the Z-axis guide message “Front/Rear” on screen when focusing on target with

3D Auto-Tracking mode.

5. Changed movement type of X axis center (when shift the measurement type from

Tracking mode to manual mode)

6. Stabilized the serial communication for transferring data

7. After taking ACA image, Enable to take Anterior Chamber Depth value in Annotation mode

[HNT-1/1P] Auto Tracking issue_the software

Field Application Department2018 . 10 . 02 (r1) 8/63

1. Start DNW program, set your PC’s COM port number and baud rate(115200)

2. Connect PC to HNT-1/1P with serial cable

3. Pressing the button of joystick, then turn on HNT-1/1P

4. Select “Serial Port” -> “Transmit” menu

5. Choose “HNT-1 / 1P **.bin” file, then press OK button

6. After downloading, turn off and on the HNT-1/1P

* If the version checked is earlier than 1.0.4, proceed to 1.0.4 or later as follows :

(It should takes around 5minutes.)

How to upgrade the software

[The Screen of progress with upgrade]

[HNT-1/1P] Auto Tracking issue_the software

4) Upgrade the Software to the latest version (Over V1.0.4)

Field Application Department2018 . 10 . 02 (r1) 9/63

5) How to adjust the LED brightness

[Enter the Focus Align Test]

1. Enter the Engineer mode: Press PRINT -> R -> L -> SETUP button on the main screen

2. Press the Focus Align Test

1 4

[HNT-1/1P] Auto Tracking issue

Field Application Department2018 . 10 . 02 (r1) 10/63

※Preparation

[REF/KERATOMETER Model-Eye] [HNT Calibration JIG of 30mmHg]

Before you check the Auto Tracking and Focus related LEDs,

prepare the following tools :

[HNT-1/1P] Auto Tracking issue

Andere Handbücher für HNT-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huvitz Laborausrüstung Handbücher

Huvitz

Huvitz Excelon XD Bedienungsanleitung

Huvitz

Huvitz CRK-7000 Bedienungsanleitung

Huvitz

Huvitz Excelon Bedienungsanleitung

Huvitz

Huvitz HRK-7000 Bedienungsanleitung

Huvitz

Huvitz Excelon CAB-4000 Bedienungsanleitung

Huvitz

Huvitz HS-5000 Bedienungsanleitung

Huvitz

Huvitz HLM-9000 Bedienungsanleitung

Huvitz

Huvitz Excelon CAB-4000 Bedienungsanleitung

Huvitz

Huvitz CME-9000 Bedienungsanleitung

Huvitz

Huvitz HNT-7000 Bedienungsanleitung

Huvitz

Huvitz SMART BLOCKER HBK-410 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung