IBM TOTAL STORAGE NAS 100 Programmierhandbuch

IBM TotalStorage NAS 100

Quick Start Instructions



IBM TotalStorage NAS 100

Quick Start Instructions



First Edition (August 2002)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by

GSA ADP Schedule Contract with IBM Corp.

IBM TotalStorage

™

NAS 100 Quick Start Instructions

Step 1: Read this first

Caution:

—Safety Information

Always power off the NAS 100 before removing the top cover.

Use safe practices when lifting this product.

Do not place any objects on top of the appliance.

Notes:

1. The latest Release Notes are available at www.ibm.com/storage/support/.

2. Visually inspect the unit to ensure that it was not damaged during

shipping. If any items are missing or damaged, contact your IBM

representative.

Step 2: Unpack the box

Items you find in the box:

vOne NAS 100. The NAS 100 is a “headless”appliance; it

does not have a keyboard, mouse, or monitor directly

attached to the unit.

vOne power cable

vOne set of documentation including: Caution: Safety

Information – Read This First, IBM TotalStorage NAS 100

Hardware Installation and Service Guide, Quick Start

Instructions and product and documentation CDs.

vFour mounting brackets

Items you provide

vOne Cat 5+ copper cable with connection instructions.

vOne PC with a subnetwork connection, Windows

98,

Windows 2000, or Windows NT

4.0 or later and

Internet Explorer 5.1 or later. The PC is used to establish

a remote connection to the appliance for the purpose of

configuring it.

Step 3: Installing the appliance on a tabletop

Note: If you have ordered a SCSI adapter with your appliance, refer to the

IBM TotalStorage NAS 100 Hardware Installation and Service Guide for

instructions on installing the adapter in your appliance.

1. Place the appliance on a level and stable surface.

2. Facing the front of the chassis, install the first mounting bracket:

2NAS 100 Quick Start Instructions

a. Slide the bracket, rubber-foot side down, onto the side of the chassis

and to the left of the bracket cutouts until the bracket fits snugly against

the appliance.

b. Slide the bracket to the right until the bracket clicks into the cutouts on

the side of the chassis.

3. Repeat for the three other brackets.

NAS 100

IBM TotalStorage

™

NAS 100 Quick Start Instructions 3

Step 4: Attach cables

1. Connect the appliance to your network by plugging the network cable to

the appropriate Ethernet port and then into your network.

Symbol Ethernet Port System Uses

1LAN 1 DHCP

2LAN 2 Static IP

2. Connect the power cable to the receptacle on the back of the appliance and

then to a power source outlet.

3. Continue with “Step 5: Power on and verify LED status”.

Step 5: Power on and verify LED status

1. Wait at least 20 seconds after connecting the power cable before powering

on the appliance. Power on by pressing the Power button on the front of

the appliance.

2. Wait at least 3 minutes after power on for the initial diagnostics to

complete, and then verify that the Power LED and LAN 1 or LAN 2 LED

are ON. If not, refer to the IBM TotalStorage NAS 100 User’s Reference on the

Documentation CD.

4NAS 100 Quick Start Instructions

Note: If you are using static IP (LAN 2), the Warning LED will blink,

indicating that the system has booted using 192.168.0.1, the factory

default IP address. It will continue to blink until a different IP

address is configured.

If your system uses DHCP (LAN 1) and the Warning LED blinks, the

appliance failed to retrieve an IP address. Contact your network

administrator.

1 Power button

2 Power LED

3 Warning LED

4 LAN 1 LED

5 LAN 2 LED

3. Notify your network administrator that the appliance is now connected to

the LAN, so that he can complete the installation by configuring the

appliance remotely.

Step 6: Software configuration (network administrator)

The NAS 100 is a “headless”appliance; it does not have a keyboard, mouse, or

monitor directly attached to the appliance. Therefore, to configure the

appliance, you must use a remotely attached client workstation.

1. Using Windows 98, Windows 2000 or Windows NT 4.0 or later and Internet

Explorer 5.1 or later, open the browser on a remotely attached PC and:

vIf your system uses DHCP (LAN 1), enter http://ibm5190-xxxxxxx:8099,

where xxxxxxx is the appliance’s serial number

vIf your system uses static IP (LAN 2), enter http://192.168.0.1:8099,the

factory default

IBM TotalStorage

™

NAS 100 Quick Start Instructions 5

Note: Two situations can prevent your DHCP system from finding the host

name:

vThe DHCP server is on a different subnetwork than the appliance

vThe DNS server has appended a suffix, such as .com to the host

name

If this happens, use the static IP address.

2. Log on to the web GUI using the following ID and password:

vUser ID: Administrator

vPassword: password

3. The Easy Setup window appears. Easy Setup allows you to perform the

following basic configuration tasks:

vConfiguration of the administration ID and password

vConfiguration of the host name

vCreation of a single share

vConfiguration of the ports.

If the Easy Setup basic configuration does not meet your network needs,

you can use other configuration tools, or you can link to Terminal Services

by clicking the Maintenance tab and following the prompts.

6NAS 100 Quick Start Instructions

Inhaltsverzeichnis

Andere IBM Netzwerkspeicherserver Handbücher

IBM

IBM J15 Bedienungsanleitung

IBM

IBM 2073-700 Bedienungsanleitung

IBM

IBM totalstorage 200 Handbuch

IBM

IBM 220 Betriebsanleitung

IBM

IBM TotalStorage FAStT700 Bedienungsanleitung

IBM

IBM TotalStorage DS4500 Bedienungsanleitung

IBM

IBM TotalStorageFAStT900 Bedienungsanleitung

IBM

IBM TotalStorage FAStT200 Bedienungsanleitung

IBM

IBM TotalStorage DS4100 Betriebsanleitung

IBM

IBM N3700 A20 Handbuch

IBM

IBM TotalStorage FAStT700 Bedienungsanleitung

IBM

IBM Flex System 68Y8588 Bedienungsanleitung

IBM

IBM 7979A1U Bedienungsanleitung

IBM

IBM 5147-084 Bedienungsanleitung

IBM

IBM TotalStorage NAS Gateway 300 Programmierhandbuch

IBM

IBM DS3500 Bedienungsanleitung

IBM

IBM TotalStorage NAS 300 Bedienungsanleitung

IBM

IBM x Series 200 Betriebsanleitung

IBM

IBM Storwize V7000 Bedienungsanleitung

IBM

IBM TotalStorage DS4300 Turbo Bedienungsanleitung

IBM

IBM SAN256B-6 Handbuch

IBM

IBM SAN06B-R Handbuch

IBM

IBM SAN512B-6 Handbuch

IBM

IBM TotalStorage DS4400 Bedienungsanleitung

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Seagate

Seagate U10 ST320423A Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung