IBM 6C1 Bedienungsanleitung

pSeries 610 Model 6C1 and Model 6E1

Installation Guide

SA38-0597-02

ERserver

IBM

pSeries 610 Model 6C1 and Model 6E1

Installation Guide

SA38-0597-02

ER ser ver

IBM

Third Edition (February 2002)

Before using this information and the product it supports, read the information in “Safety Notices” on page vii,

Appendix B, “Environmental Notices” on page 105, andAppendix C, “Notices” on page 107.

A reader’s comment form is provided at the back of this publication. If the form has been removed, address comments

to Information Development, Department H6DS-905-6C006, 11400 Burnet Road, Austin, Texas 78758-3493. To send

comments electronically, use this commercial internet address: [email protected]. Any information that you

supply may be used without incurring any obligation to you.

-- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth is GSA

ADP Schedule Contract with IBM Corp.

Contents

Safety Notices........................vii

Rack Safety Instructions .....................vii

Electrical Safety .......................viii

Laser Safety Information .....................ix

Laser Compliance ......................ix

Data Integrity and Verification ..................xi

About This Book ......................xiii

ISO 9000 .........................xiii

Online Publications ......................xiii

Related Publications ......................xiii

Ergonomic Information .....................xiv

Trademarks .........................xiv

Chapter 1. Setting Up the Server .................1

Step 1. Check Your Inventory ...................1

Model 6E1 and Model 6C1 ...................1

System Unit (Model 6E1 or 6C1) .................2

Model 6C1 (Rack Mount) Only ..................2

Step 2. Need Help? ......................3

Step 3. Read the Safety Notices ..................3

Step 4. Are You Installing a Model 6C1 (Rack Mount)? ...........4

Step 5. Attach the Mounting Hardware to the Rack Enclosure.........5

Step 6. Install the System in the Rack Enclosure .............8

Step 7. Are All of the Internal Options Installed? .............12

Step 8. Position the System Unit and Display..............12

Step 9. Connect the Graphics Display ................13

Step 10. Attach the Display Cable Toroid ...............14

Step 11. Connect the Keyboard and Mouse ..............15

Step 12. Connect the Serial and Parallel Devices ............16

Step 13. Connect the Adapter Cables ................17

Step 14. Connect the First External SCSI Device............18

Step 15. Connect Any Additional External SCSI Devices ..........19

Step 16. Are You Using the Rack Indicator Feature? ...........20

Step 17. Are You Using an Ethernet Connection? ............21

Step 18. Connect the Power Cables to Server .............22

Step 19. Are You Installing a Model 6C1 (Rack Mount)? ..........24

Step 20. Connect the Power Cables to Electrical Outlets ..........25

Step 21. Your System Unit Is Now Set Up...............26

Step 22. Start the Operating System ................26

Step 23. Accessing Documentation for Your New System..........27

Hardware Documentation ...................27

Operating System Documentation ................27

Step 24. Verify the Hardware Operation ...............27

Chapter 2. Verifying the Hardware Operation .............29

iii

Step 1. Considerations Before Running This Procedure ..........29

Step 2. Loading the Diagnostics ..................29

Step 3. Running System Verification.................29

Step 4. Performing Additional System Verification ............30

Step 5. Stopping the Diagnostics ..................31

Chapter 3. Installing Options in Your System .............33

Safety Considerations .....................33

Handling Static-Sensitive Devices .................34

Stopping the System Unit ....................34

Placing the Model 6C1 in the Service Position .............35

Option List .........................36

Removing the Service Access Covers ................37

Service Access Cover (Model 6E1 ) ................37

Service Access Cover (Model 6C1) ................38

Removing the Bezel ......................39

Bezel (Model 6E1) .....................39

Bezel (Model 6C1) .....................40

Removing and Replacing Processor and Memory Card Cover ........41

Removal .........................41

Replacment ........................41

Installing a Processor Card....................42

Removing a Processor Card ...................44

Installing a Memory Card ....................46

Removing a Memory Card ....................48

Installing Memory DIMMs ....................50

Removing Memory DIMMs ....................52

Installing Adapters.......................54

Removing Adapters ......................58

Installing Hot-Swap Disk Drives ..................60

Removing Hot-Swap Disk Drives ..................63

Installing an Internal Disk Drive ..................65

Installing a CD-ROM, Tape Drive, DVD-RAM, or DVD-ROM .........66

Configuring or Deconfiguring Disk Drives ...............68

Configuring Drives......................68

Deconfiguring Drives .....................68

Installing a Hot-Swap Power Supply.................69

Removing a Hot-Swap Power Supply ................71

Replacing a Hot-Swap Fan Assembly ................73

Replacing the Bezel ......................75

Bezel (Model 6E1) .....................75

Bezel (Model 6C1) .....................76

Replacing the Service Access Covers ................77

Service Access Cover (Model 6E1) ................77

Service Access Cover (Model 6C1) ................78

Replacing the Battery .....................79

Connecting the Rack Indicator...................81

Chapter 4. Attention LED and Lightpath LEDs ............83

Operator Panel Display .....................83

iv Installation Guide

Indicator Panel ........................84

Component LEDs .......................85

Reporting the Problem .....................85

Repair Action ........................86

Chapter 5. Hardware Problem Determination .............87

Problem Determination Using the Standalone or Online Diagnostics ......87

Problem Determination When Unable to Load Diagnostics .........94

Appendix A. Communications Statements ..............99

Federal Communications Commission (FCC) Statement ..........99

European Union (EU) Statement ..................99

International Electrotechnical Commission (IEC) Statement.........100

United Kingdom Telecommunications Safety Requirements.........100

Avis de conformité aux normes du ministère des Communications du Canada 100

Canadian Department of Communications Compliance Statement ......100

VCCI Statement .......................100

Electromagnetic Interference (EMI) Statement - Taiwan ..........101

Radio Protection for Germany ..................101

Federal Communications Commission (FCC) Statement..........102

European Union (EU) Statement .................103

International Electrotechnical Commission (IEC) Statement.........103

United Kingdom Telecommunications Safety Requirements.........103

Avis de conformité aux normes du ministère des Communications du Canada 104

Canadian Department of Communications Compliance Statement ......104

VCCI Statement .......................104

Radio Protection for Germany ..................104

Appendix B. Environmental Notices................105

Product Recycling and Disposal..................105

Environmental Design .....................105

Acoustical Noise Emissions ...................105

Declared Acoustical Noise Emissions ...............105

Appendix C. Notices .....................107

Appendix D. System Records ..................109

Identification Numbers .....................109

Device Records .......................110

Memory Card .......................110

Options .........................111

SCSI IDs and Bay Locations ..................112

Appendix E. General Attributes Required When Using a TTY Terminal ...115

Additional Communication Attributes ................116

Additional Keyboard Attributes ..................117

Additional Printer Attributes ...................118

Appendix F. Firmware Updates .................119

Contents v

Checking the Current Firmware Levels ...............119

Updating System Firmware ...................119

Index ..........................121

vi Installation Guide

Safety Notices

danger

notice indicates the presence of a hazard that has the potential of causing

death or serious personal injury. Danger notices appear on the following pages:

vviii

v22

v33

caution

notice indicates the presence of a hazard that has the potential of causing

moderate or minor personal injury. Caution notices appear on the following pages:

vviii

vix

v22

v33

v79

Note: For a translation of these notices, see

System Unit Safety Information

, order

number SA23-2652.

Rack Safety Instructions

vDo not install this unit in a rack where the internal rack ambient temperatures will

exceed 40 degrees C.

vDo not install this unit in a rack where the air flow is compromised. Any side, front or

back of the unit used for air flow through the unit must not be in direct contact with

the rack.

vCare should be taken to ensure that a hazardous condition is not created due to

uneven mechanical loading when installing this unit in a rack. If the rack has a

stabilizer it must be firmly attached before installing or removing this unit.

vConsideration should be given to the connection of the equipment to the supply

circuit so that overloading of circuits does not compromise the supply wiring or

overcurrent protection. To provide the correct power connection to the rack, refer to

the rating labels located on the equipment in the rack to determine the total power

requirement for the supply circuit.

vAn electrical outlet that is not correctly wired could place hazardous voltage on the

metal parts of the system or the devices that attach to the system. It is the

responsibility of the customer to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock.

vii

Electrical Safety

Observe the following safety instructions any time you are connecting or disconnecting

devices attached to the workstation.

DANGER

An electrical outlet that is not correctly wired could place hazardous voltage

on metal parts of the system or the devices that attach to the system. It is the

responsibility of the customer to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock.

Before installing or removing signal cables, ensure that the power cables for

the system unit and all attached devices are unplugged.

When adding or removing any additional devices to or from the system,

ensure that the power cables for those devices are unplugged before the

signal cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

Use one hand, when possible, to connect or disconnect signal cables to

prevent a possible shock from touching two surfaces with different electrical

potentials.

During an electrical storm, do not connect cables for display stations, printers,

telephones, or station protectors for communications lines.

CAUTION:

This product is equipped with a three–wire power cable and plug for the user’s

safety. Use this power cable with a properly grounded electrical outlet to avoid

electrical shock.

DANGER

To prevent electrical shock hazard, disconnect all power cables from the

electrical outlet before relocating the system.

viii Installation Guide

Andere Handbücher für 6C1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM eServer 250 xSeries Produktinformationsblatt

IBM

IBM BladeCenter HS22V Bedienungsanleitung

IBM

IBM x3850 X5 7145 Bedienungsanleitung

IBM

IBM 88723RU Bedienungsanleitung

IBM

IBM BladeCenter HS22 Handbuch

IBM

IBM Power System 5148-21L Bedienungsanleitung

IBM

IBM x3200 - System M3 - 7328 Bedienungsanleitung

IBM

IBM Netfinity 5000 Betriebsanleitung

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

IBM

IBM HS21 - BladeCenter - 8853 Bedienungsanleitung

IBM

IBM NetVista N2800e Bedienungsanleitung

IBM

IBM 306m - eServer xSeries - 8849 Bedienungsanleitung

IBM

IBM System x dx360 M3 Bedienungsanleitung

IBM

IBM BladeCenter HS22V Bedienungsanleitung

IBM

IBM 8865 Bedienungsanleitung

IBM

IBM 7380E1U Bedienungsanleitung

IBM

IBM iDataPlex Rack Type 7825 Montage- und Wartungsanleitung

IBM

IBM eServer xSeries 345 Type 8670 Bedienungsanleitung

IBM

IBM System x3650 M4 BD Type 5466 Montage- und Wartungsanleitung

IBM

IBM 9407-515 Bedienungsanleitung

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

IBM

IBM 8687 - Eserver xSeries 440 Technisches Handbuch

IBM

IBM 7026-H80 - RS/6000 - 256 MB RAM Bedienungsanleitung

IBM

IBM H SERIES RS/6000 Montage- und Wartungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung