IBM 8647 - Eserver xSeries 225 Bedienungsanleitung

Welcome. . .

Thank you for buying an

IBM xSeries server.

This server

contains information for setting

up and configuring your server.

For detailed information

about your server, view the

on the

You can also find the most

current information about your

server on the IBM Web site at:

http://www.ibm.com/pc/support

Installation Guide

User's Guide

Documentation CD.

Go to the Server Support

flow chart

Cable the server

and options

Start the server

Install options:

• Drives

• Microprocessors

• Adapters

• Memory

Did the server

start correctly?

Ye s

Use ServerGuide™

to setup and

configure hardware

Did configuration

complete?

Use

ServerGuide to

install operating

system?

Use ServerGuide to

install applications,

such as IBM systems

management software

and IBM ServeRAID

programs

System is ready to use.

Go to the Server Support

flow chart to register

and profile your server.

Go to the Web for Instructions,

http://www.ibm.com/pc/support/

Ye s

Installation Guide

Install the server in

the rack, if required

xSeries 225

Type 8647

Server Support

Ye s

Use the troubleshooting

information provided with

your server to determine

the cause of the problem

and the action to take.

Flash the latest levels of BIOS,

service processor, diagnostics,

and RAID code.

You can download this code at

http://www.ibm.com/pc/support/

No Software

Ye s

Hardware

Check all cables for loose connections

and verify that all optional devices you

installed are on the ServerProven list.

You can view the ServerProven list at

http://www.ibm.com/pc/compat/

Server working

properly?

Problem

solved?

Problem

solved?

Hardware or

software problem?

View support telephone numbers at

http://www.ibm.com/planetwide/

View information about IBM support line at

or view support telephone numbers at

http://www.ibm.com/services/sl/products/

http://www.ibm.com/planetwide/

http://www.ibm.com/pc/register/

Ye s

Problem

solved?

IBM xSeries 225

Type 8647

Installation Guide

ER s e r v e r



Note:

Before using this information and the product it supports, read the general information in Appendix B,

“IBM Statement of Limited Warranty Z125-4753-07 11/2002”, on page 63 and Appendix C, “Notices”, on

page 79.

Second Edition (August 2003)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introduction ......................1

The IBM xSeries Documentation CD .................2

Hardware and software requirements ................2

Using the Documentation Browser .................2

Notices and statements used in this publication .............3

Features and specifications .....................4

Major components of your server ..................5

System-board option connectors ...................6

System-board internal connectors ..................7

System-board external connectors ..................7

System-board error LEDs .....................8

Chapter 2. Installing options....................9

Installation guidelines .......................9

System reliability guidelines....................9

Working inside the server with the power on .............10

Handling static-sensitive devices .................10

Removing the side cover .....................11

Removing the bezel .......................12

Removing and installing the support bracket ..............13

Working with adapters ......................14

Adapter considerations .....................14

Installing an adapter ......................15

Cabling an optional SCSI adapter .................18

Installing internal drives......................19

Internal drive bays ......................19

Preinstallation steps ......................21

Installing a drive in bay 2 ....................21

Installing a non-hot-swap hard disk drive ..............23

Power and signal cables for internal drives .............25

Installing a hot-swap drive .....................26

SCSI IDs for hot-swap hard disk drives ...............27

Installing memory modules ....................28

Installing an additional microprocessor ................30

Installing a security rope clip ....................33

Completing the installation.....................34

Replacing the bezel ......................34

Replacing the side cover ....................35

Cabling the server.......................36

Updating your server configuration.................36

Chapter 3. Server controls, LEDs, and power.............37

Controls and LEDs .......................37

Server power features ......................38

Turning on the server .....................38

Turning off the server .....................39

Chapter 4. Configuring the server .................41

Using the ServerGuide Setup and Installation CD ............41

Using the Configuration/Setup Utility program .............42

Using the RAID configuration programs ................42

Using the LSI Logic Configuration Utility program ...........43

Using ServeRAID Manager ...................43

Chapter 5. Updating IBM Director .................51

Chapter 6. Solving problems ...................53

Diagnostic tools overview .....................53

Power-on self-test (POST).....................54

POST beep codes ......................54

POST error messages .....................54

ServerGuide problems ......................55

Troubleshooting charts ......................56

CD-ROM drive problems ....................56

Diskette drive problems.....................56

Hark disk drive problems ....................56

Keyboard, mouse, or pointing-device problems ............57

Memory problems .......................57

Microprocessor problems ....................57

Monitor problems .......................58

Power problems .......................59

System-board error LEDs .....................59

Appendix A. Getting help and technical assistance ..........61

Before you call .........................61

Using the documentation .....................61

Getting help and information from the World Wide Web ..........61

Software service and support ...................62

Hardware service and support ...................62

Appendix B. IBM Statement of Limited Warranty Z125-4753-07 11/2002 ..63

Part 1 - General Terms ......................63

Part 2 - Country-unique Terms ...................66

Part3-Warranty Information ...................77

Appendix C. Notices ......................79

Edition notice .........................79

Trademarks ..........................80

Important notes.........................80

Product recycling and disposal ...................81

Electronic emission notices ....................81

Federal Communications Commission (FCC) statement .........81

Industry Canada Class A emission compliance statement ........82

Australia and New Zealand Class A statement ............82

United Kingdom telecommunications safety requirement.........82

European Union EMC Directive conformance statement .........82

Taiwanese Class A warning statement ...............83

Chinese Class A warning statement ................83

Japanese Voluntary Control Council for Interference (VCCI) statement . . . 83

Power cords ..........................83

Index ............................87

iv IBM xSeries 225 Type 8647: Installation Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid a shock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to a properly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi IBM xSeries 225 Type 8647: Installation Guide

Statement 2

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has a

module containing a lithium battery, replace it only with the same module type made

by the same manufacturer. The battery contains lithium and can explode if not

properly used, handled, or disposed of.

Do not:

vThrow or immerse into water.

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could result in

exposure to hazardous laser radiation. There are no serviceable parts inside the

device.

vUse of controls or adjustments or performance of procedures other than those

specified herein might result in hazardous radiation exposure.

Danger

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the

following. Laser radiation when open. Do not stare into the beam, do not view directly with

optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

Statement 8

CAUTION:

Never remove the cover on a power supply or any part that has the following label

attached.

Hazardous voltage, current, and energy levels are present inside any component that

has this label attached. There are no serviceable parts inside these components. If you

suspect a problem with one of these parts, contact a service technician.

viii IBM xSeries 225 Type 8647: Installation Guide

Andere Handbücher für 8647 - Eserver xSeries 225

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM System x3630 M4 Bedienungsanleitung

IBM

IBM eServer xSeries 135 Produktinformationsblatt

IBM

IBM System x3250 Bedienungsanleitung

IBM

IBM 5100 Produktinformationsblatt

IBM

IBM System x3610 Bedienungsanleitung

IBM

IBM Power E1050 Bedienungsanleitung

IBM

IBM BladeCenter S Bedienungsanleitung

IBM

IBM System x3500 M4 Bedienungsanleitung

IBM

IBM RS/6000 Enterprise Server M80 Bedienungsanleitung

IBM

IBM BladeCenter HS23 Bedienungsanleitung

IBM

IBM System x3690 X5 Bedienungsanleitung

IBM

IBM System x3400 Type 7975 Bedienungsanleitung

IBM

IBM QS22 - BladeCenter - 0793 Bedienungsanleitung

IBM

IBM 88553RX Bedienungsanleitung

IBM

IBM 8676 - Eserver xSeries 335 Bedienungsanleitung

IBM

IBM System x3250 M4 Bedienungsanleitung

IBM

IBM Power System 9009-41A Bedienungsanleitung

IBM

IBM 326m - eServer - 7969 Betriebsanleitung

IBM

IBM pSeries 670 Bedienungsanleitung

IBM

IBM Power System 5148-21L Bedienungsanleitung

IBM

IBM 6H0 Bedienungsanleitung

IBM

IBM eServer xSeries 305 Type 8673 Bedienungsanleitung

IBM

IBM eserver pSeries 690 Bedienungsanleitung

IBM

IBM Power System AC922 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung