IBM 9407-515 Bedienungsanleitung

Quick start guide for i5 520, 525, and 515 (9405-520,

9406-520, 9406-525, and 9407-515)

IBM Systems

Rack-mounted devices are not to be used as a shelf or workspace. Do not place any

object on top of rack-mounted devices.

CAUTION: The weight of this part or unit is between 32 and 55 kg (70.5 and 121.2 lb). It

takes three persons to safely lift this part or unit. (C010)

The exclamation mark surrounded by a gray triangle denotes caution. A CAUTION notice

indicates the presence of a hazard that has the potential of causing moderate or minor

personal injury. Before doing a step that contains a caution icon, read and understand the

caution statement that accompanies it.

This Quick start guide contains an abbreviated set of setup instructions designed to help you quickly unpack

and set up a standard system. Users unfamiliar with this IBM hardware should use the fully detailed, setup

instructions that you can find in the IBM Systems Hardware Information Center. For details about how to

access the information center, see task 11 .Finish your system setup

1Before you begin

Use safe practices when lifting.

Tools needed (Rack installation only)

Flat-blade screwdriver

32-55 kg (70.5-121.2 lbs)

2.1

2.2

Inventory

Complete an inventory of the external parts.

Locate the kitting report (inventory list) in the bag that contains the information center

CD (SK3T-8159). Make sure you received all of the parts that you ordered. Your order

information should be located in an envelope adhered to the outside of your system box.

You can also obtain order information from your marketing representative or IBM

Business Partner.

If you have incorrect, missing, or damaged parts, contact any of the following resources:

If you are not installing your server into a rack, skip to task 7

Cable the server and

Operations Console (LAN)

If you are installing your server into a rack, you will need the following parts:

Your IBM reseller

IBM Rochester manufacturing automated information line at 1-800-300-8751

(United States only)

Directory of worldwide contacts at www.ibm.com/planetwide.

Select your location to view the service and support contact information.

Rack-mounting template Slide rail assemblies

Rack-mounting hardware kit

Blue knobs

System-to-slide-rail screws

Rack-retaining screws

Blue thumbscrews

Latch brackets

Latch-bracket screws

Cable-management arm

3.1

3.2

3.3

If you are installing your server into a new rack, ensure that you have completed the

unpacking instructions that were provided with the rack.

If your server is already installed in a rack, skip to task 7

Place the rack in the location of the installation.

Use the wrench that was provided with your rack to level the rack by raising or lowering

the front and back leveling feet .

Install the stabilizer bracket on the front of the rack.

If necessary, remove any trim kit pieces that were previously installed on the rack.

Removing the trim kit pieces allows you to read the EIA units on the rack.

Cable the server and Operations

Console (LAN).

Tip:

3.4

3Prepare the rack for installation

Install the slide rail assemblies

4.1

4.2

Locate the rack-mounting template, the rack-mounting hardware kit, and the slide rail

assemblies that were included with your server.

Use the rack-mounting template to determine where in the rack to place the server. Remove

any filler panels necessary to allow adequate access to the location where you will install

your server.

If you do not have enough space around your rack to open the front and back doors completely, remove

the doors before starting this task to allow adequate access.

4.3 Follow the rack-mounting template to mark the location on

the rack where you will place the server. Use the self-

adhesive placement dots found on the rack-mounting

template.

4.4

Pull the back latch-assembly

release tabs to the retracted

position and lock the latch

assembly . Make sure the

alignment pins that are

located on the back of the slide

rail are fully retracted.

From the back of the rack,

insert the front alignment pin

into the hole in the front of the

rack, as identified by the self-

adhesive placement dot.

Install the slide rail assemblies .A

Note: Install units into the lower part of the rack first. Place

larger and heavier units in the lower part of the rack.

Front

Back

From the back, finger-tighten one of the rack-retaining screws in the hole that is

located between the two back alignment pins .

4.6

4.7

4.5

From the front, finger-tighten one of the rack-retaining screws in the first hole

above the front alignment pin .

From the front, attach the latch bracket by inserting the hook into the rack hole above

the hole where you will place the latch bracket screw. Finger-tighten the screw.

4.8

Align the retracted back pins with the holes identified by the self-adhesive placement

dots. Place the rack flange between the slide-rail flange and the retracted alignment

pins .

Press the back latch-assembly-release tab to extend the back alignment pins into the

back of the rack.

Repeat steps 4.4 through 4.7 for

each slide rail assembly.

Actual size

part 12J5289

Actual size

part 26H7213

Actual size

part 12J5289

Before you begin: Read this entire task before completing any individual steps.

5.1

5.2 Fully extend both slide rails.

5.7 Using a screwdriver, tighten the two rack-retaining screws to secure the slide rails to

the back of the rack.

5.3 Lift the server using the handles on each side, and position the server on the

extended slide rails. Align the three holes of the inner slide of the slide rails with the

three holes on each side of the server.

5.4 Using a screwdriver, attach the inner slide of

the slide rails to each side of the server by

using the system-to-slide-rail screws . Use

a screwdriver to tighten each of the screws.

5.6 Simultaneously release the blue safety latches

located near the front of each slide rail

assembly, and slowly push the server back into

the rack.

Pull the server back out and push it in

again to make sure that the rails are aligned

correctly and that it glides smoothly.

Tip:

5.5 Remove the four blue knobs .B

5.8

Use safe practices when lifting.

Attach the four blue knobs to the server . The blue knobs are used temporarily to rest

the server on the slide rails for installation. These knobs will be removed after the server is

secured to the slide rails.

Install the server onto the slide rail assembly

Before installing the server onto the slide rail assembly, ensure that the leveling feet

are extended and that the stabilizer bracket is correctly installed to prevent the rack

from falling forward.

32-55 kg (70.5-121.2 lbs)

Slide the server part of the way out of the rack. Using a screwdriver, tighten the front

two rack-retaining screws and the two latch-bracket screws on the front of the rack

to secure the slide rails.

Actual size

part 04N6485

6.3

From the back of the rack, use the pin to affix the cable-management arm to

the left slide-rail-management arm flange that is attached to the rack frame .

6.1 Locate the cable-management arm and the two pins .EA

6.2

Use the second pin to affix the other end of the cable-management arm to the flange

that is attached to the sliding portion of the left slide rail assembly .

6Install the cable-management arm

Tip: If space is limited inside the rack, slide the server out part of the way to install the

cable-management arm.

7.1

7.2

7.3

Operations Console is an installable component of iSeries Access for Windows . It allows you to use one or

more PCs to access and control, either remotely or locally, console and control panel functions.

TM (R)

If necessary, connect an Ethernet cable from the PC that

will serve as the system console to your local network,

router, switch, or hub.

7Cable the server and Operations Console

(LAN)

Connect another network cable from the same local

network, router, switch, or hub, to the first embedded

Ethernet port (P1-T5) or the adapter card in position C5

or C2 on the back of the server.

Route the server power cord through the rings or clamps,

if available, on the back of the server, and connect it to

the power supply port. Do not connect the server

power cord to a power source until instructed to do

so.

If you are not using Operations Console to manage your server, go to task 8

Cable the server and

the Thin Console

The following steps guide you through a LAN implementation of Operations Console. If you are using a local

console that is directly attached, follow the setup instructions in the IBM Systems Hardware Information

Center. For details about how to access the information center, see task 11 .Finish your system setup

If you are using a PC that is already in use as your system console, you do not need to power off the system

console to complete this procedure.

Prerequisite: This task requires one or more Ethernet cables that are not supplied with your server.

7.4 If necessary, plug the power cord for your system

console (PC) into a power source, and turn it on.

Install iSeries Access for Windows onto the system console using the

CD that was provided with your server. If you already have iSeries Access for

Windows installed, skip to step 7.6.

Setup and

Operations

7.5

Insert the CD and select .

Click and follow the prompts when the iSeries Access for Windows window is

displayed.

Select or installation and select at least the following components.

The Operations Console component is not available using the Typical or PC5250

User options.

Setup and Operations iSeries Access for Windows

Custom Full

Note:

Required Programs

5250 Display and Printer Emulator

Operations Console

; if IBM Personal Communications V5.8 (V5.7 CSD 1

minimum) is not installed

Click and follow the prompts.Next

7.6

Start the Operations Console configuration wizard on the system console.

Click .

Follow the steps in the wizard. Use the following information to enter any required data.

Start > Programs > iSeries Access for Windows > Operations Console

Service host name

(interface name):

Target partition:

Service tools device ID:

Access password:

Serial Number:

Use either the name of a current network interface, or a new

name for this connection.

Enter the number , even if you are not partitioning.

Use the default value .

Enter a password that you will remember. The password is case

sensitive and can be a maximum of 128 characters.

QCONSOLE

Enter the serial number located on the server control panel.

Click to save the configuration and to exit the configuration wizard.Finish

7.8

Connect your server to a power source. The control panel should be lit and display

. The server is not yet powered on.

If does not display, see the instructions in the IBM Systems Hardware

Information Center. For details about how to access the information center, see task 11

01 B

N V=F

01 B N V=FNote:

Finish your system setup

7.7

Right-click the connection name and select to start your connection. The system

console will not complete the connection until you have completed step 7.10.

Connect

7.9

Press the white Power On button on the front of the server. There is a short delay before

the server powers on, of approximately 5 to 20 minutes. When the server powers on, the

control panel displays .01 B N V=F

7.10

When the LAN Service Tools Sign-on window is displayed, type your access password,

and then type (eight 1's) in both the service tools user ID and password fields.11111111

You have completed the basic setup. Go to task 11 .Finish your system setup

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM 88631SU - System x3850 - 8863 Bedienungsanleitung

IBM

IBM Power System E880C Gebrauchs- und Pflegehandbuch

IBM

IBM RS/6000 7046 B50 Bedienungsanleitung

IBM

IBM 8236-E8C Bedienungsanleitung

IBM

IBM 5100 Produktinformationsblatt

IBM

IBM p 655 series Bedienungsanleitung

IBM

IBM 7944 Bedienungsanleitung

IBM

IBM x3550 - System - 7978 Bedienungsanleitung

IBM

IBM x3650 - System M2 - 7947 Bedienungsanleitung

IBM

IBM 7940 Bedienungsanleitung

IBM

IBM H Series Montage- und Wartungsanleitung

IBM

IBM xSeries 346 Bedienungsanleitung

IBM

IBM x3850 X5 7145 Bedienungsanleitung

IBM

IBM 8647 - Eserver xSeries 225 Bedienungsanleitung

IBM

IBM 8480 - Eserver xSeries 205 Bedienungsanleitung

IBM

IBM BladeCenter HS22V Bedienungsanleitung

IBM

IBM BladeCenter JS23 Bedienungsanleitung

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

IBM

IBM eServer xSeries 236 Bedienungsanleitung

IBM

IBM Novell 10 SP1 EAL4 Leitfaden

IBM

IBM 4252E1U Bedienungsanleitung

IBM

IBM Power System 5148-21L Bedienungsanleitung

IBM

IBM P260 Montage- und Wartungsanleitung

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung