IBM EServer xSeries 225 Type 8647 Bedienungsanleitung

IBM xSeries 225

Type 8647

Option Installation Guide

ERserver



IBM xSeries 225

Type 8647

Option Installation Guide

ER s e r v e r



Note:

Before using this information and the product it supports, read the general information in “Notices”, on

page 49.

Second Edition (August 2003)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introduction ......................1

Related publications .......................1

Notices and statements used in this book ...............1

Major components of the xSeries 225 Type 8647 server ..........2

System-board option connectors ...................3

System-board internal connectors ..................3

System-board external connectors ..................4

System-board error LEDs .....................4

Chapter 2. Installing options....................7

Installation guidelines .......................7

System reliability considerations ..................7

Handling static-sensitive devices ..................8

Server power features.......................8

Turning on the server ......................8

Turning off the server ......................9

Removing the side cover .....................10

Removing the bezel .......................11

Removing and installing the support bracket ..............12

Working with adapters ......................13

Adapter considerations .....................13

Installing an adapter ......................14

Cabling an optional SCSI adapter .................17

Installing internal drives......................18

Internal drive bays ......................18

Working with hot-swap drives ..................20

Installing non-hot-swap hard disk drives...............22

Installing a 5.25-inch removable-media drive .............25

Power and signal cables for internal drives .............27

Installing memory modules ....................28

Installing an additional microprocessor ................29

Configuring the operating system .................30

Installing the additional microprocessor ...............31

Installing a security rope clip ....................34

Replacing a hot-swap power supply .................35

Replacing the battery ......................37

Completing the option installation ..................39

Replacing the bezel ......................39

Replacing the side cover ....................40

Updating your server configuration.................40

Connecting external options ....................41

Installing the server in a rack....................41

Chapter 3. Input/output ports ...................43

Audio connectors ........................43

Line in ...........................44

Line out ..........................44

Microphone .........................44

Auxiliary-device (pointing-device) connector ..............44

Ethernet (RJ-45) connector ....................44

Keyboard connector .......................44

Parallel connector ........................45

Serial connectors ........................45

Ultra320 SCSI connector .....................45

SCSI cabling requirements ...................46

Universal Serial Bus connectors ..................46

Video connector ........................47

Appendix. Notices .......................49

Edition notice .........................49

Trademarks ..........................50

Important notes.........................50

Product recycling and disposal ...................51

Electronic emission notices ....................51

Federal Communications Commission (FCC) statement .........51

Industry Canada Class A emission compliance statement ........52

Australia and New Zealand Class A statement ............52

United Kingdom telecommunications safety requirement.........52

European Union EMC Directive conformance statement .........52

Taiwanese Class A warning statement ...............53

Chinese Class A warning statement ................53

Japanese Voluntary Control Council for Interference (VCCI) statement . . . 53

Power cords ..........................53

Index ............................57

iv IBM xSeries 225 Type 8647: Option Installation Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid a shock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to a properly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi IBM xSeries 225 Type 8647: Option Installation Guide

Statement 2:

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has

a module containing a lithium battery, replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can

explode if not properly used, handled, or disposed of.

Do not:

vThrow or immerse into water

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

viii IBM xSeries 225 Type 8647: Option Installation Guide

Andere Handbücher für eServer xSeries 225 Type 8647

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM System x3850 Bedienungsanleitung

IBM

IBM x3400 Bedienungsanleitung

IBM

IBM E850C Bedienungsanleitung

IBM

IBM System x3620 M3 7376 Bedienungsanleitung

IBM

IBM ProtecTIER DD6 Bedienungsanleitung

IBM

IBM HS12 - BladeCenter - 8028 Bedienungsanleitung

IBM

IBM Flex System x240 Compute Node Bedienungsanleitung

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

IBM

IBM eServer xSeries 455 Type 8855 Bedienungsanleitung

IBM

IBM P260 Montage- und Wartungsanleitung

IBM

IBM System x3755 M3 7164 Bedienungsanleitung

IBM

IBM 3518 Bedienungsanleitung

IBM

IBM RS/6000 7025 F50 Series Bedienungsanleitung

IBM

IBM Eserver i Series Bedienungsanleitung

IBM

IBM F80 Bedienungsanleitung

IBM

IBM 8236-E8C Bedienungsanleitung

IBM

IBM iDataPlex dx360 M4 Bedienungsanleitung

IBM

IBM System x3300 M4 Handbuch

IBM

IBM REDPAPER 520Q Installationsanleitung

IBM

IBM Netfinity Series Bedienungsanleitung

IBM

IBM Power System S821LC Bedienungsanleitung

IBM

IBM eServer 232 xSeries Bedienungsanleitung

IBM

IBM SC34-6814-04 Bedienungsanleitung

IBM

IBM xSeries 346 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

IBM eServer xSeries 225 Type 8647 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken