IBM @Server pSeries 630 6C4 Bedienungsanleitung

pSeries 630 Model 6C4 and Model 6E4

Installation Guide

SA38-0605-01

ERserver

IBM

pSeries 630 Model 6C4 and Model 6E4

Installation Guide

SA38-0605-01

ER ser ver

IBM

Second Edition (August 2002)

Before using this information and the product it supports, read the information in “Safety Notices” on page vii,

Appendix B, “Environmental Notices” on page 137, and Appendix C, “Notices” on page 139.

A reader’s comment form is provided at the back of this publication. If the form has been removed, address comments

to Information Development, Department H6DS-905-6C006, 11501 Burnet Road, Austin, Texas 78758-3493. To send

comments electronically, use this commercial internet address: [email protected]. Any information that you

supply may be used without incurring any obligation to you.

Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth is GSA

ADP Schedule Contract with IBM Corp.

Contents

Safety Notices........................vii

Rack Safety Instructions .....................vii

Electrical Safety .......................viii

Laser Safety Information .....................ix

Laser Compliance ......................ix

Data Integrity and Verification ..................xi

About This Book ......................xiii

ISO 9000 .........................xiii

Online Publications ......................xiii

Related Publications ......................xiii

Ergonomic Information .....................xiv

Trademarks .........................xiv

Chapter 1. Getting Started ....................1

Documentation Overview .....................3

Configuring Online Documentation..................5

Viewing the Online Documentation from the Documentation CD .......5

Installing the Online Documentation on a System ............5

Installing the online documentation on a Documentation Server .......5

Chapter 2. Setting Up the System .................7

Step 1. Check Your Inventory ...................7

pSeries 630 Model 6C4 and Model 6E4 ...............7

Eserver pSeries 630 Model 6C4 and Model 6E4 ...........8

Model 6C4 (Rack Mount) Only ..................9

Step 2. Need Help? ......................10

Step 3. Read the Safety Notices ..................10

Step 4. Are You Installing a Model 6C4 (Rack Mount) or a Model 6E4 (Deskside)? 11

Step 5. Read the Rack Safety Instructions...............12

Rack Safety Instructions....................12

Step 6. Attach the Mounting Hardware to the Rack Enclosure ........13

Step 7. Install the Model 6C4 into the Rack Enclosure...........22

Step 8: Install the Cable Management Arm ..............24

Step 9. Are All of the Internal Options Installed? .............25

Step 10. Positioning the Model 6E4 and Display.............25

Step 11. Check Your Display or Console Type .............26

Step 12. Are You Connecting to an Hardware Management Console (HMC)? . . . 27

Step 13. Attach the Display Cable Toroid ...............28

Step 14. Connect the Graphics Display................29

Step 15. Connect the Keyboard and Mouse (When Using a Graphics Display). . . 30

Step 16. Connect the Serial and Parallel Devices ............31

Step 17. Connect the Adapter Cables ................33

Step 18: Connect the First External SCSI Device............34

Step 19: Connect Any Additional External SCSI Devices ..........35

Step 20. Are You Using the Rack Indicator Feature? ...........36

iii

Step 21: Are You Using an Ethernet Connection? ............37

Step 22: Connect the Power Cables to the System ............38

Step 23: Attaching Cables to the Model 6C4 Cable Management Arm .....39

Step 24. Connect the Power Cables to Electrical Outlets ..........40

Step 25. Your System Unit Is Now Set Up...............40

Step 26: Start Your System....................41

Step 27. Accessing Documentation for Your New System..........42

Hardware Documentation ...................42

Operating System Documentation ................42

Step 28: Run System Verification..................42

Chapter 3. Verifying the Hardware Operation .............43

Running System Verification When Not Connected to an Hardware Management

Console (HMC) .......................43

Step 1. Considerations Before Running This Procedure .........43

Step 2. Loading the Diagnostics .................44

Step 3. Running the Verification Procedure .............45

Step 4. Performing Additional System Verification ...........45

Step 5. Stopping the Diagnostics .................45

Running System Verification When Connected to an HMC .........46

Step 1. Running Online Diagnostics in Service Mode ..........46

Step 2. Running the Verification Procedure .............47

Step 3. Performing Additional System Verification ...........47

Step 4. Stopping the Diagnostics .................47

Chapter 4. Installing Options for the Model 6C4 and Model 6E4 ......49

Safety Considerations .....................49

Handling Static-Sensitive Devices .................50

Options and Task List .....................51

Stopping the System ......................52

Starting the System ......................52

Placing the Model 6C4 into the Service Position.............53

Returning the Model 6C4 to the Operating Position............54

Covers ..........................55

Service Access Cover Removal (Model 6C4) .............55

Service Access Cover Replacement (Model 6C4) ...........55

Outer Side Cover Removal (Model 6E4) ..............56

Outer Side Cover Replacement (Model 6E4) .............56

Service Access Cover Removal (Model 6E4) .............57

Service Access Cover Replacement (Model 6E4)...........58

Model 6E4 Back Cover Removal .................58

Model 6E4 Back Cover Replacement ...............59

Disk Drive Access Cover Removal ................59

Disk Drive Access Cover Replacement ...............59

Bezel Door (Model 6E4).....................60

Bezel Door Removal (Model 6E4) ................60

Bezel Door Replacement (Model 6E4) ...............60

Bezels ..........................61

Front Bezel Removal (Model 6C4) ................61

Front Bezel Replacement (Model 6C4) ...............62

iv Eserver

pSeries 630 Model 6C4 and Model 6E4 Installation Guide

Front Bezel Removal (Model 6E4) ................63

Front Bezel Replacement (Model 6E4) ...............63

Install the Hardware Management Console (HMC) ............64

Position the HMC and Monitor..................64

Connect the Cables .....................64

Connect the 8-Port Adapter Cables ................67

Connect the External Modem ..................67

Connect the LAN Cable (If Applicable) ...............69

Plug in the HMC Power Cable..................69

Configure the Network ....................69

Configure Inventory Scout Services ................69

Configure the Service Agent ..................71

PCI Adapters ........................73

PCI Hot-Plug Manager Access .................73

Non-Hot-Pluggable PCI Adapter Removal ..............75

Adding or Replacing a Non-Hot-Pluggable PCI Adapter .........78

Hot-Pluggable PCI Adapter Removal ...............80

Replacing a Hot-Pluggable PCI Adapter ..............84

Installing a Hot-Pluggable PCI Adapter ...............89

Fans ...........................92

Removing a Processor Fan in a Non-Hot-Swap Environment .......92

Replacing a Processor Fan in a Non-Hot-Swap Environment .......94

Hot-Swap Fan Assembly Removal ................95

Hot-Swap Fan Assembly Replacement ...............98

Media Drives (Diskette, CD-ROM, Tape, or Disk Drive) ..........100

Media Drive Removal ....................100

Media Drive Replacement...................103

Hot-Plug Disk Drives .....................104

Deconfiguring (Removing) or Configuring a Disk Drive .........104

Deconfiguring (Removing)...................104

Configuring (Replacing) ...................104

Hot-Plug Disk Drive Removal .................105

Hot-Plug Disk Drive Replacement ................107

Processor Card .......................108

Processor Card Removal ...................108

Adding or Replacing a Processor Card ..............111

Memory DIMMs .......................113

Memory DIMM Removal ...................113

Memory DIMM Replacement ..................117

Replacing the Battery .....................119

Power Supplies .......................124

Non-Hot-Swap Power Supply Removal ..............124

Non-Hot-Swap Power Supply Replacement .............127

Hot-Swap Power Supply Removal ................128

Hot-Swap Power Supply Replacement ..............131

Appendix A. Communications Statements .............133

Federal Communications Commission (FCC) Statement..........133

European Union (EU) Statement .................133

International Electrotechnical Commission (IEC) Statement.........134

Contents v

United Kingdom Telecommunications Safety Requirements.........134

Avis de conformité à la réglementation d’Industrie Canada .........134

Industry Canada Class A Emission Compliance Statement ........134

VCCI Statement .......................134

Electromagnetic Interference (EMI) Statement - Taiwan ..........135

Radio Protection for Germany ..................135

Appendix B. Environmental Notices................137

Product Recycling and Disposal..................137

Environmental Design .....................137

Acoustical Noise Emissions ...................137

Declared Acoustical Noise Emissions ................138

Appendix C. Notices .....................139

Appendix D. Fault and Attention LEDs...............141

Operator Panel Display ....................141

Component LEDs ......................142

Reporting the Problem .....................143

Repair Action ........................144

Resetting the LEDs ......................144

Appendix E. System Records ..................145

Identification Numbers .....................145

Device Records .......................146

Memory DIMM Configuration Record ...............146

Options .........................147

SCSI IDs and Bay Locations ..................148

Appendix F. General Attributes Required When Using a TTY Terminal....151

Additional Communication Attributes ................152

Additional Keyboard Attributes ..................153

Additional Printer Attributes ...................154

Appendix G. Firmware Updates .................155

Determining the Level of Firmware on the System............155

System Firmware Update Using a Locally Available Image .........155

Index ..........................157

vi Eserver

pSeries 630 Model 6C4 and Model 6E4 Installation Guide

Safety Notices

danger

notice indicates the presence of a hazard that has the potential of causing

death or serious personal injury. Danger notices appear on the following pages:

vviii

v10

v124

v49

caution

notice indicates the presence of a hazard that has the potential of causing

moderate or minor personal injury. Caution notices appear on the following pages:

vviii

vix

v11

v38

v49

v50

v119

Note: For a translation of these notices, see

System Unit Safety Information

, order

number SA23-2652.

Rack Safety Instructions

vDo not install this unit in a rack where the internal rack ambient temperatures will

exceed 40 degrees C.

vDo not install this unit in a rack where the air flow is compromised. Any side, front or

back of the unit used for air flow through the unit must not be in direct contact with

the rack.

vCare should be taken to ensure that a hazardous condition is not created due to

uneven mechanical loading when installing this unit in a rack. If the rack has a

stabilizer it must be firmly attached before installing or removing this unit.

vConsideration should be given to the connection of the equipment to the supply

circuit so that overloading of circuits does not compromise the supply wiring or

overcurrent protection. To provide the correct power connection to the rack, refer to

the rating labels located on the equipment in the rack to determine the total power

requirement for the supply circuit.

vAn electrical outlet that is not correctly wired could place hazardous voltage on the

metal parts of the system or the devices that attach to the system. It is the

responsibility of the customer to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock.

vii

Electrical Safety

Observe the following safety instructions any time you are connecting or disconnecting

devices attached to the workstation.

In the system you are about to setup or service:

vThe ac power interface connector is considered the main power disconnect device.

vThis system has redundant power supply capabilities, meaning that it has the ability

to have two power supplies running simultaneously in the same system unit. When

instructed to disconnect the power source, ensure that all power cables have been

unplugged.

DANGER

An electrical outlet that is not correctly wired could place hazardous voltage

on metal parts of the system or the devices that attach to the system. It is the

responsibility of the customer to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock.

Before installing or removing signal cables, ensure that the power cables for

the system unit and all attached devices are unplugged.

When adding or removing any additional devices to or from the system,

ensure that the power cables for those devices are unplugged before the

signal cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

Use one hand, when possible, to connect or disconnect signal cables to

prevent a possible shock from touching two surfaces with different electrical

potentials.

During an electrical storm, do not connect cables for display stations, printers,

telephones, or station protectors for communications lines.

CAUTION:

This product is equipped with a three-wire power cable and plug for the user’s

safety. Use this power cable with a properly grounded electrical outlet to avoid

electrical shock.

DANGER

To prevent electrical shock hazard, disconnect all power cables from the

electrical outlet before relocating the system.

viii Eserver

pSeries 630 Model 6C4 and Model 6E4 Installation Guide

Andere Handbücher für @Server pSeries 630 6C4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM 8482 - eServer xSeries 206 Bedienungsanleitung

IBM

IBM 787264U Bedienungsanleitung

IBM

IBM 8668 - Eserver xSeries 232 Betriebsanleitung

IBM

IBM X3850 X6 Bedienungsanleitung

IBM

IBM LS21 - BladeCenter - 7971 Bedienungsanleitung

IBM

IBM Power System S814 Bedienungsanleitung

IBM

IBM 419452u - Servers System X3250 M2 Xeon... Bedienungsanleitung

IBM

IBM x3400 Bedienungsanleitung

IBM

IBM Netfinity 3500 Series Bedienungsanleitung

IBM

IBM BladeCenter JS12 7998 Bedienungsanleitung

IBM

IBM Power 750 Express 8233-E8B Bedienungsanleitung

IBM

IBM 7977E7U Bedienungsanleitung

IBM

IBM 8670 - Eserver xSeries 345 Bedienungsanleitung

IBM

IBM x3850 X5 Bedienungsanleitung

IBM

IBM P 615 series Bedienungsanleitung

IBM

IBM Power System POWER7 Series Handbuch

IBM

IBM Power Systems S812LC 8348-21C Bedienungsanleitung

IBM

IBM 9008-22L Bedienungsanleitung

IBM

IBM Carrier Grade X3650 T Bedienungsanleitung

IBM

IBM 88625RX Bedienungsanleitung

IBM

IBM eserver pSeries 690 Bedienungsanleitung

IBM

IBM System x3100 M4 Bedienungsanleitung

IBM

IBM 306m - eServer xSeries - 8849 Bedienungsanleitung

IBM

IBM eServer xSeries 335 Type 8676 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung