IBM X3850 X6 Bedienungsanleitung

System x3850 X6 and x3950 X6

Types3837and3839

Rack Installation Instructions



System x3850 X6 and x3950 X6

Types3837and3839

Rack Installation Instructions



Second Edition (June 2014)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Chapter 1. Safety information .....1

Chapter 2. Rack kit parts inventory . . . 3

Chapter 3. Rack installation ......5

Identifying the rack space for the server .....5

Opening the rails .............8

Installing the rails in the rack .........9

Installing the server in the rack ........10

Fastening the server in the rack........13

Installing the shipping brackets........14

Attaching the cable management brackets and

routing the cables ............15

Removing the server from the rack ......16

iv System x3850 X6 and x3950 X6 Types 3837 and 3839: Rack Installation Instructions

Chapter 1. Safety information

Review the documentation that comes with the rack cabinet for safety and cabling

information. Before you install the server in a rack cabinet, review the following

guidelines.

Note: Use the M5 screws that come with the rails to install the server in a rack

cabinet if you plan to transport the rack cabinet to another location with the server

installed or if the rack is in a vibration-prone area.

vMake sure that the room air temperature is below 40°C (104°F).

vDo not block any air vents; usually, 15 cm (6 in.) of air space in the rear and 5

cm (2 in.) in the front provides proper airflow.

vTwo or more people are required to install the device in a rack.

vDo not leave any unused space within a rack open. Fillers must be used to

prevent recirculation of warm air.

vInstall your server only in a rack that has perforated front and rear doors or in a

rack that is equipped with an IBM®Rear Door Heat eXchanger.

vDo not extend more than one device out of the rack at the same time.

vRemove the rack doors and side panels to provide easier access during

installation.

vThe EIA flanges must have holes and clearances per EIA-310-D.

vIf you have a rack with adjustable depth EIA rails, set the distance between the

rails to no more than 719 mm (28.3 inches) outside to outside in order to allow

space to install the cable management brackets onto the rear of the system.

vMake sure that there is sufficient room in front of the front EIA flange to provide

minimum bezel clearance of 50 mm (1.97 inches).

vMake sure that there is sufficient room behind the rear of the rear EIA flanges to

provide for cable management and routing.

vRack weight-handling capacity must be sufficient for the aggregate weight of the

server, power distribution units, and power cables.

vThe rack must be stabilized with stabilization brackets and leveling pads so that

it does not become unstable when it is fully populated.

Rack Safety Information, Statement 2

DANGER

vAlways lower the leveling pads on the rack cabinet.

vAlways install stabilizer brackets on the rack cabinet.

vAlways install servers and optional devices starting from the bottom of the

rack cabinet.

vAlways install the heaviest devices in the bottom of the rack cabinet.

Statement 4

CAUTION:

Use safe practices when lifting.

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

Statement 26

CAUTION:

Do not place any object on top of rack-mounted devices.

2System x3850 X6 and x3950 X6 Types 3837 and 3839: Rack Installation Instructions

Chapter 2. Rack kit parts inventory

This topic provides information about the items in the rail kit and rack installation

kit.

The information and instructions in this document apply to both the System x3850

X6 and the System x3950 X6 servers.

A rail kit comes with the items that you need to install the server in a rack. Open

the rail kit and the rack installation kit. If items are missing or damaged, contact

your place of purchase.

The rail kit box includes the following hardware. This kit ships with the server.

vOne right server support rail

vOne left server support rail

vEight M5 hex head screws

vTen hook and loop straps

Left rail

LEFT FRONT

Right rail

Hook and loop

fasteners

(x10)

M5 hex

head screws

(x8)

The cable management bracket kit includes the following hardware. This kit ships

with the server.

vOne right cable management bracket (two for 8U system)

vOne left cable management bracket (two for 8U system)

Left cable

management

bracket

Right cable

management

bracket

The optional shipping bracket kit includes the following hardware. You can

purchase this kit separately.

vEight M5 cage nuts (use on EIA flanges with square holes)

vEight M5 clip nuts (use on EIA flanges with round holes)

vEight M5 hex head screws

vTwo shipping brackets

Shipping

brackets (x2)

M5 clip

nut (x8)

M5 cage

nut (x8)

Hex head

screw (x8)

The server might also come with an additional bag with M5 screws, cage nuts, and

clip nuts.

4System x3850 X6 and x3950 X6 Types 3837 and 3839: Rack Installation Instructions

Andere Handbücher für X3850 X6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM 7870B4U Bedienungsanleitung

IBM

IBM 884015U Betriebsanleitung

IBM

IBM x3500 - System - 7977 Bedienungsanleitung

IBM

IBM Power System S821LC Bedienungsanleitung

IBM

IBM e Server iSeries 825 Bedienungsanleitung

IBM

IBM eServer xSeries 345 Type 8670 Bedienungsanleitung

IBM

IBM System i Bedienungsanleitung

IBM

IBM System x3100 M3 Bedienungsanleitung

IBM

IBM 8672-26x Bedienungsanleitung

IBM

IBM eServer 380 xSeries Produktinformationsblatt

IBM

IBM 86604RU - Netfinity 5500 - 4RU Betriebsanleitung

IBM

IBM 88371RU Betriebsanleitung

IBM

IBM 425162U Bedienungsanleitung

IBM

IBM S822LC Bedienungsanleitung

IBM

IBM 71413SU - System x3950 M2 Service-Handbuch

IBM

IBM S812L Bedienungsanleitung

IBM

IBM System x3250 M4 Bedienungsanleitung

IBM

IBM S822LC Installationsanleitung

IBM

IBM System x3200 M3 Bedienungsanleitung

IBM

IBM 884872U - eServer 326 - 8848 Bedienungsanleitung

IBM

IBM x3750 M4 Bedienungsanleitung

IBM

IBM 9009-41G Bedienungsanleitung

IBM

IBM zEnterprise EC12 Bedienungsanleitung

IBM

IBM 8676 - Eserver xSeries 335 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung