IBM XSeries 445 Type 8870 Bedienungsanleitung

xSeries 445 Type 8870

Option Installation Guide

ERserver



xSeries 445 Type 8870

Option Installation Guide

ER s e r v e r



Note: Before using this information and the product it supports, read the general information in “Getting

help and technical assistance”, on page 83.

First Edition (June 2003)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introduction......................1

Related publications .......................1

Major components of the xSeries 445 server ..............2

Center plane connectors and LEDs .................3

SMP Expansion Module connectors and LEDs.............4

PCI-X planar internal connectors and LEDs ..............6

I/O board internal connectors ...................7

Remote Supervisor Adapter component locations............7

Chapter 2. Installing options....................9

Installation guidelines .......................9

System reliability guidelines....................9

Working inside the server with power on ..............10

Handling static-sensitive devices .................10

Safety information ........................11

Opening the cover .......................16

Removing and replacing the bezel..................17

Removing and replacing a hot-swap power supply ............18

PCI and PCI-X adapters .....................20

Cabling a ServeRAID adapter ..................23

Installing the serial port .....................25

Installing or replacing a drive....................28

Hot-swap hard disk drive ....................28

Diskette drive ........................29

DVD-ROM drive .......................30

SMP Expansion Module .....................31

Removing and Installing the SMP Expansion Module and cover ......32

Memory Module .......................38

Installing and replacing a microprocessor ..............46

Replacing and troubleshooting fans .................52

Replacing fans 1 and 2.....................52

Replacing fans 3 and 4.....................53

Replacing the battery ......................55

Closing the cover ........................57

Connecting the cables ......................58

SMP Expansion Port cabling ...................59

RXE Expansion Port cabling ...................64

RXE Management Port cabling ..................69

Power cabling .........................72

SCSI cabling..........................72

USB cabling ..........................72

Video cabling .........................72

Mouse cabling .........................73

Keyboard cabling .......................73

Gigabit Ethernet cabling .....................73

Remote Supervisor Adapter cabling .................73

Chapter 3. I/O connectors and LEDs ................75

Universal Serial Bus connectors ..................76

USB cables and hubs .....................76

USB-port connectors......................76

Keyboard connector .......................76

Video connector ........................76

Auxiliary-device (pointing device) connector ..............77

RXE Expansion Port .......................77

SMP Expansion Port.......................77

Serial Port ..........................77

Remote Supervisor Adapter communication connectors ..........78

Gigabit Ethernet port.......................80

Configuring the Gigabit Ethernet controller..............80

Ethernet port connectors ....................81

Appendix. Getting help and technical assistance ...........83

Before you call .........................83

Using the documentation .....................83

Getting help and information from the World Wide Web ..........83

Software service and support ...................84

Hardware service and support ...................84

Index ............................85

iv xSeries 445 Type 8870: Option Installation Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid a shock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to a properly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi xSeries 445 Type 8870: Option Installation Guide

Statement 2:

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has

a module containing a lithium battery, replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can

explode if not properly used, handled, or disposed of.

Do not:

vThrow or immerse into water

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

viii xSeries 445 Type 8870: Option Installation Guide

Andere Handbücher für xSeries 445 Type 8870

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM X3850 X6 Bedienungsanleitung

IBM

IBM System x3250 M3 Type 4251 Bedienungsanleitung

IBM

IBM Netfinity 5000 Bedienungs- und Sicherheitshinweise

IBM

IBM System z10 EC Bedienungsanleitung

IBM

IBM E Server 440 x Series Betriebsanleitung

IBM

IBM RS/6000 H50 Montage- und Wartungsanleitung

IBM

IBM 79473AU Bedienungsanleitung

IBM

IBM BladeCenter HS22V Handbuch

IBM

IBM AS/400e Bedienungsanleitung

IBM

IBM QS21 - BladeCenter - 0792 Bedienungsanleitung

IBM

IBM x3200 M2 Type 4367 Bedienungsanleitung

IBM

IBM BladeCenter HS23 Bedienungsanleitung

IBM

IBM 7380E1U Bedienungsanleitung

IBM

IBM 7944E2U Bedienungsanleitung

IBM

IBM xSeries 450 8688 Bedienungs- und Wartungsanleitung

IBM

IBM LS42 - BladeCenter - 7902 Bedienungsanleitung

IBM

IBM 84885BU Betriebsanleitung

IBM

IBM eServer xSeries 135 Produktinformationsblatt

IBM

IBM System x3650 M4 Type 7915 Bedienungsanleitung

IBM

IBM 88728RU Bedienungsanleitung

IBM

IBM RS/6000 7043 43P Series Bedienungsanleitung

IBM

IBM eServer 150 xSeries Bedienungsanleitung

IBM

IBM System i Bedienungsanleitung

IBM

IBM BladeCenter HS22 Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

IBM xSeries 445 Type 8870 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken