ICP DAS USA EIP-2000 Series Installationsanleitung
ICP DAS
EIP-2000 FAQ
FAQ Version 1.5
ICP DAS Co., Ltd.
2022-12-01
2
Table of Contents
Q1：How to connect to the Allen-Bradley PLC？ ................................................................................................ 3
Q2：How to use EDS file of EIP-2000 series？ .................................................................................................. 7
Q3: When I click the “Network Scan” button, and it pop-up a “Can not find any module” window. What should I
do?.................................................................................................................................................................... 11
Q4: The AI status we get from the EIP-2017/EIP-2019 is different with the real AI value. How do I solve this
problem? ........................................................................................................................................................... 11
Q5: If I forget the IP address of the EIP-2000 modules, how do I search them? ................................................ 12
Q6: I can't update the firmware with the Utility, how should I do? ...................................................................... 12
Q7: How to know the version of EIP-2000 modules hardware? ......................................................................... 12
Q8: How to find the compatible FW for EIP-2000 modules? .............................................................................. 13
Q9: Is there any LabVIEW sample to EIP-2000 modules? ................................................................................ 13
Q10: What is an EDS file? ................................................................................................................................ 14
Q11: Where can I download the EDS file of EIP-2000? ..................................................................................... 14
Q12: What is the Instance ID of EIP-2000 series? ............................................................................................ 14
Q13: What is the data length of the EIP-2000 series? ....................................................................................... 14
Q14: I can ping the EIP-2000 module, but I cannot use the EIP-2000 Utility for setting and communication
testing. How to solve this problem? ................................................................................................................... 15
Q15: If I forget the network settings of the EIP-2000 module, besides restoring the original factory settings, is
there any other solution? ................................................................................................................................... 17
Q16: When I cannot use the EIP-2000 Utility to scan the button, how can I configure or test the connection of
the EIP-2000 module? ...................................................................................................................................... 18
Q17: I can’t measure the current value when I change EIP-2017 to the Single-Ended mode. What can I do? .. 18
3
Q1：How to connect to the Allen-Bradley PLC？
A1：It is tested and confirmed that the EIP-2000 can be connected to the Allen-BradleyTM ControlLogix
Logix 5563 through the 1756-ENBT ControlLogix EtherNet/IP Module successfully. The configuration
software is RSLogix 5000. Please follow the steps below:
1.
Open RSLogix 5000 and create a new project.
Figure1-1. Create a new project.
2.
Select the PLC type and give the project a name.
Figure1-2. Set the PLC type and project name.
4
3.
Create a new module in the “Ethernet” item.
Figure 1-3. Create a new module.
4.
Select the “ETHERNET-MODULE” below “Communications” in the Select Module window.
5
Figure1-4. Select “ETHERNET-MODULE”.
5.
Configure the new module parameters. The I/O length of new module must be the same with the
length of EIP-2000 I/O data. The data assembly please refer to Table 1-1 and the instance ID
please refer to Table 1-2.
Figure1-5. The settings of EIP-2055
Table 1-1. Data Assembly of EIP-2000
Module
Data Assembly Byte
count
Description
EIP-2055
Input Assembly
34
1st Byte: DI status
2nd Byte: DO status read back
3rd~34th Byte: DI counters
Output
Assembly
2
1st Byte: DO status
2nd Byte: to set DI counters zero
EIP-2060
Input Assembly
26
1st Byte: DI status
2nd Byte: DO status read back
3rd~26th Byte: DI counters
Output
Assembly
2
1st Byte: DO status
2nd Byte: to set DI counters zero
EIP-2042
Input Assembly
2
1st Byte: DO status read back (DO0~DO7).
2nd Byte: DO status read back (DO8~DO15).
Output
Assembly
2
1st Byte: DO status (DO0~DO7).
2nd Byte: DO status (DO8~DO15).
6
EIP-2051
Input Assembly
66
1st Byte: DI status(DI0~DI7).
2nd Byte: DI status(DI8~DI15).
3rd~65th Byte: DI counters.
Output
Assembly
2
1st Byte: to set DI counters zero (DI0~DI7).
2nd Byte: to set DI counters zero (DI8~DI15).
EIP-2017
Input Assembly
31
1st ~ 16th Byte: AI status(AI0~7) for DIFF. or S.E.
mode.
17nd ~ 31th Byte: AI status(AI8~15) for S.E. mode
only.
Output
Assembly
22
1st Byte: Set value to the module.
2nd ~ 17th Byte: Set type code to AI0~AI15.
18th Byte: Filter selection of AI
19th Byte: Channel mode selection DIFF. or S.E.
20th Byte: AI representation
21th Byte: AI channel selection (AI0 ~ AI7)
22th Byte: AI channel selection (AI8 ~ AI15)
EIP-2019
Input Assembly
20
1st ~ 16th Byte: AI status(AI0~AI7).
17nd ~ 18th Byte: The Brocken wire status.
19rd ~ 20th Byte: CJC status.
Output
Assembly
21
1st Byte: Set value to the module.
2nd ~ 7th Byte: Set type code to Ch0~Ch7.
8th Byte: Filter selection of AI
9th Byte: Wire break detector
10th Byte: AI representation
11th Byte: Select AI channel to be short
12th Byte: CJC switch
13th Byte: CJC increment
14th ~ 21th Byte:CJC Offset
Table 1-2. Instance ID table of EIP-2000
Implicit Message Information of EIP-2000
Instance Instance ID Data length
Input(T->O) 65hex(101) Depends on modules.
e.g.34(EIP-2055)
Out(O->T) 66hex(102) Depends on modules.
e.g.2(EIP-2055)
Configuration 64hex(100)
7
Q2：How to use EDS file of EIP-2000 series？
A2：EDS file is a convenient way to make the connection between EtherNet/IP Scanner and Adapter.
All the EIP-2000 series EDS file can be download on our website:
http://www.icpdas.com/products/Remote_IO/can_bus/EtherNet_IP_series.htm
We provide the connection steps of Hilscher CIFX 50-RE with EIP-2055 EDS file. The configuration
software is SYNCON.net. Please refer to the steps below：
1.
Open SYNCON.net and create a new project.
Figure2-1 Create a new project.
2.
To find the “CIFX RE/EIM” item below “EtherNet/IP -> Master”, and drag the “CIFX RE/EIM” to the
busline.
Figure2-2 Select CIFX RE/EIM
8
3.
Click “Network” and select “Import Device Descriptions”.
Figure2-3 Import Device Descriptions
4.
To select the EDS file you download on our website of CD.
Figure2-4 Select EDS file
5.
To find the “EIP-2055 EDS V1.1” item below “EtherNet/IP -> Slave”, and drag the “EIP-2055 EDS
V1.1” to the busline.
Figure2-5 EIP-2055 EDS
9
6.
To configure CIFX RE/EIM and EIP-2055 in the same network area.
Figure2-6 Network Settings
7.
Right click the CIFX_RE/EIM and click “Download”.
Figure2-7 Download configurations.
10
8.
Right click the CIFX_RE/EIM again and click “Start Communication”.
Figure2-8 Start Communication
9.
The communication is complete. You can observe the I/O status on the Diagnostic window.
Figure2-9 I/O status observation
Andere Handbücher für EIP-2000 Series
2
Inhaltsverzeichnis
Andere ICP DAS USA Steuereinheit Handbücher
ICP DAS USA
ICP DAS USA PET-AR400 Bedienungsanleitung
ICP DAS USA
ICP DAS USA SG-3016 Bedienungsanleitung
ICP DAS USA
ICP DAS USA ECAT-2061 Bedienungsanleitung
ICP DAS USA
ICP DAS USA M-7067D Bedienungsanleitung
ICP DAS USA
ICP DAS USA LP-8 4 Series Allgemeine Anweisungen
ICP DAS USA
ICP DAS USA M-7033D Bedienungsanleitung
ICP DAS USA
ICP DAS USA I-7041 Bedienungsanleitung
ICP DAS USA
ICP DAS USA LP-8 21 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA ECAT-2011H Bedienungsanleitung
ICP DAS USA
ICP DAS USA M-7051 Bedienungsanleitung
ICP DAS USA
ICP DAS USA M-7041D Bedienungsanleitung
ICP DAS USA
ICP DAS USA MDC-700 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA PET-7053 Bedienungsanleitung
ICP DAS USA
ICP DAS USA XP-8000-Atom-CE6 Bedienungsanleitung
ICP DAS USA
ICP DAS USA SG-3071 Bedienungsanleitung
ICP DAS USA
ICP DAS USA WF-2026 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PDS-220F Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA M-7041 Bedienungsanleitung
ICP DAS USA
ICP DAS USA MDC-700 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA IR-712A Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
