ICP DAS USA LP-8 4 Series Allgemeine Anweisungen

ICP DAS

P-

-8

(v1.6)

The OS image parameters are specified as follows:

ICP DAS

1.【Required Software Versions】

Before updating OS image, check the shipment date for your device. This is important as

there are two versions of the OS image update depending on the shipment date:

If the shipment date is earlier than 2013/03/25, you will only need to download

the latest version of the OS image file and the boot.ini file.

(file name: lp8x4x_os_image_later_than_2013.zip)

If the shipment date is later than 2013/03/25, you will need to download the

latest version of /boot/ directory, which includes the OS image file, and the

boot.ini file, etc.

(file name: lp8x4x_os_image_later_than_2013.zip)

For details, refer to the following web pages:

https://www.icpdas.com/en/download/show.php?num=990&model=LP-8841-EN

In addition, user can download full content of microSD Card (sd_card.7z), and visit to

https://www.icpdas.com/en/download/show.php?num=991&model=LP-8841-EN

Please note:

The flash and microSD disk have a finite number of program-erase cycles.

Important information should always be backed up on other media or storage

device for long-term safekeeping.

ICP DAS

2.【Preparation】

(1) Preparation tools as below：

Power Supply: +10 to +30VDC (E.g., DP-665)

See https://www.icpdas.com/en/product/guide+Accessories+Power__Supplies+Power__Supply

for a full list of the available accessories.

USB card reader for microSD card × 1 (Fig. 1)

microSD card × 1 (Fig. 2)

Fig.1 USB card reader Fig.2 microSD card

< Important notes regarding microSD cards >

1. Ensure that the microSD card is properly dismounted before unplugging it.

2. Do not power off or reboot the LinPAC while data is being written to or read from the

microSD card.

3. The microSD card must be formatted with a VFAT, EXT2, or EXT3 file system.

4. Scan and repair the microSD card if necessary.

ICP DAS

(2) Insert the microSD card into the USB microSD card reader, and then make a copy of

the directories indicated below, including all the subdirectories, for backup

purposes. The directories that should be copied depend on your shipment date:

If the shipment date is earlier than 2013/3/25, copy the files from the /os_image/

directory of CD or FTP site into the /boot/ directory of microSD card via Windows / Linux

PC. The following figures show the contents of the /boot/ directory (Fig. 3):

Fig.3 LP-8x41 /boot/ directory

If the shipment date is later than 2013/3/25, copy the files from the /boot/ directory on

the CD or FTP site into the /boot/ directory of microSD card via Windows / Linux PC. The

following figures show the contents of the subdirectories (Fig. 4):

Fig.4 LP-8x41 /boot/ subdirectories

(3) Turn off the power to the LP-8x41, and connect Ethernet cable,VGA cable and

microSD card to the LP-8x4x.

ICP DAS

(4) Move the rotary switch to position 2, as shown in Fig. 5.

Fig.5 Move the rotary switch to position 2

By the way, user can try ‘wget’ command to download files served with ftp over a network in LP-8x4x.

Command: wget ftp://ftp.icpdas.com/pub/cd/linpac/napdos/lp-8x4x/SD_Card/boot/2/lp8x4x_1.16_m.bin

Command: wget ftp://ftp.icpdas.com/pub/cd/linpac/napdos/lp-8x4x/SD_Card/boot/2/boot.ini

If download completely, copy files into default directory.

ICP DAS

3.【Update Procedure】

< Important Notes >

1. Ensure that you perform a backup of any important files, before attempting to update

the OS image.

2. DO NOT power off or reboot the controller while the OS image is being updated, as this

may result in the OS image becoming corrupted, which may cause the controller to

malfunction.

(1) Turn on the power to the LP-8x4x, and the screen illustrated in Fig. 6 will be

displayed.

Fig. 6 Burning screen

(2) Move the rotary switch to position 0,as show in Fig. 7, and the OS Image will begin

loading from the SD card, as illustrated in Fig. 8, then monitor the upload process.

Fig. 7 Move the rotary switch to position 0 Fig. 8 Loading the OS Image

ICP DAS

(3) Being uploading the OS Image to the Flash memory on the LP-8x4x, as show in Fig. 9.

Fig. 9 Uploading the OS Image to the Flash memory

(4) After the upload process is complete, the LP-8x4x will automatically reboot to finalize

the update process, as show in Fig. 10. Once the boot sequence is complete, the

XWindows screen will appear, as show in Fig. 11.

Fig. 10 Starting screen Fig. 11 Boot sequence completely

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ICP DAS USA Steuereinheit Handbücher

ICP DAS USA

ICP DAS USA tPET-P2R2 Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7033D Bedienungsanleitung

ICP DAS USA

ICP DAS USA FR-32R Bedienungsanleitung

ICP DAS USA

ICP DAS USA SG-3784M Bedienungsanleitung

ICP DAS USA

ICP DAS USA PROFI-5045 Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7060 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7088 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ZT-2510 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7067 Bedienungsanleitung

ICP DAS USA

ICP DAS USA SG-3227 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7063 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-7218Z Bedienungsanleitung

ICP DAS USA

ICP DAS USA PET-7261 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PDS-5000 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7060D Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7041 Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7016 Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7041 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-TH8 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7080 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-2200 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA DS-2200 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-8213W-4G Bedienungsanleitung

ICP DAS USA

ICP DAS USA IR-712A Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung