IDataLink Maestro Rr Bedienungsanleitung

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY02-DS

PRODUCTS REQUIRED

iDatalink Maestro RR Radio Replacement Interface

iDatalink Maestro TO2 Installation Harness

INSTALL GUIDE

TOYOTA 4 RUNNER

WITH JBL 20142018

Retains factoRy amplifieR, steeRing wheel contRols, and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR with JBl 2014-2018

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware and that

you carefully review the Installation

Diagram and Vehicle Wire Refer-

ence Chart.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

DURING INSTALLATION

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR with JBl 2014-2018

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from

aftermarket radio main harness to the TO2 T-harness and

match the wire functions.

• Remove the factory radio.

STEP 2

• If the vehicle is equipped with an OEM backup camera,

connect the TO2 T-harness to the backup camera harness.

STEP 3

• Connect the factory harness to the TO2 T-harness.

STEP 4

• Plug the male WHITE 2 pin connector of your TO2

T-harness into the OBDII harness.

• Plug the OBDII connector into the OBDII of the vehicle.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the backup camera RCA cable into the

aftermarket radio (if equipped).

• Connect the auxiliary RCA cables into the aftermarket radio

(if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

STEP 6

• Connect all the harnesses to the Maestro RR module then

test your installation.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key

to the OFF position then disconnect all connectors from

the module. Press and hold the module’s programming

button and connect all the connectors back to the module.

Wait, the module’s LED will ﬂash RED rapidly (this may

take up to 10 seconds). Release the programming button.

Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail

“[email protected]”. Visit us at “maestro.idatalink.

com/support” and “www.12voltdata.com/forum/”

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR with JBl 2014-2018

AUX INAUX IN

BACKUP CAMBACKUP CAM

MAIN

HARNESS

RCA CABLES

FACTORY RADIO HARNESS

REVERSE CAMERA HARNESS

TO2 T-HARNESS

STEP 2

STEP 3

STEP 5

WIRES FROM

VEHICLE

CONNECT YELLOW RCA AUX IN

IF VEHICLE IS EQUIPPED WITH

AUXILIARY VIDEO

CONNECT IF EQUIPPED

CONNECT TO

AFTERMARKET RADIO

STEP 6

MAESTRO RR MODULE

DATA

CABLE

OBDII CONNECTOR

STEP 4

WIRING DIAGRAM with an Amplifier

YELLOW - 12V (+)

BLACK - GROUND

RED - ACCESSORY (+)

YELLOW/BLACK - FOOT BRAKE

ORANGE - ILLUMINATION (+)

PURPLE/WHITE - REVERSE LIGHT (+)

PINK - VEHICLE SPEED

LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

STEP 1

WHITE

WHITE/BLACK

GRAY

GRAY/BLACK

LF RCA INPUT

RF RCA INPUT

SEE AFTERMARKET

RADIO GUIDE

FOR RADIO WIRE

COLORS

GREEN - LR SPEAKER (+)

GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

PURPLE - RR SPEAKER (+)

CONNECTIONS

NOT

REQUIRED

WITH AMP

YELLOW/GREEN (NOT CONNECTED)

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR with JBl 2014-2018

RADIO WIRE REFERENCE CHART

Wire

Description Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Illumination (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White or Yellow/Green

(see Wiring diagram) Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY02-DS

PRODUCTS REQUIRED

iDatalink Maestro RR Radio Replacement Interface

iDatalink Maestro TO2 Installation Harness

INSTALL GUIDE

TOYOTA 4 RUNNER

WITHOUT JBL 20142018

Retains factoRy amplifieR, steeRing wheel contRols, and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR without JBl 2014-2018

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware and that

you carefully review the Installation

Diagram and Vehicle Wire Refer-

ence Chart.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

DURING INSTALLATION

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR without JBl 2014-2018

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Cut and remove the front speaker wire junction connectors.

• Connect the wires shown on the next page from

aftermarket radio main harness to the TO2 T-harness and

match the wire functions.

• Remove the factory radio.

STEP 2

• If the vehicle is equipped with an OEM backup camera,

connect the TO2 T-harness to the backup camera harness.

STEP 3

• Connect the factory harness to the TO2 T-harness.

STEP 4

• Plug the male WHITE 2 pin connector of your TO2

T-harness into the OBDII harness.

• Plug the OBDII connector into the OBDII of the vehicle.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the backup camera RCA cable into the

aftermarket radio (if equipped).

• Connect the auxiliary RCA cables into the aftermarket radio

(if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

STEP 6

• Connect all the harnesses to the Maestro RR module then

test your installation.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key

to the OFF position then disconnect all connectors from

the module. Press and hold the module’s programming

button and connect all the connectors back to the module.

Wait, the module’s LED will ﬂash RED rapidly (this may

take up to 10 seconds). Release the programming button.

Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail

“[email protected]”. Visit us at “maestro.idatalink.

com/support” and “www.12voltdata.com/forum/”

ADS-RR(SR)-TOY02-DS maestro.idatalink.com

toyota 4 RunneR without JBl 2014-2018

AUX INAUX IN

BACKUP CAMBACKUP CAM

YELLOW - 12V (+)

BLACK - GROUND

RED - ACCESSORY (+)

YELLOW/BLACK - FOOT BRAKE

ORANGE - ILLUMINATION (+)

PURPLE/WHITE - REVERSE LIGHT (+)

PINK - VEHICLE SPEED

LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAIN

HARNESS

RCA CABLES

FACTORY RADIO HARNESS

REVERSE CAMERA HARNESS

TO2 T-HARNESS

STEP 1

STEP 2

STEP 3

STEP 5

WIRES FROM

VEHICLE

CONNECT YELLOW RCA AUX IN

IF VEHICLE IS EQUIPPED WITH

AUXILIARY VIDEO

SEE AFTERMARKET

RADIO GUIDE

FOR RADIO WIRE

COLORS

GREEN - LR SPEAKER (+)

GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

PURPLE - RR SPEAKER (+)

CONNECT TO

AFTERMARKET RADIO

STEP 6

MAESTRO RR MODULE

DATA

CABLE

OBDII CONNECTOR

STEP 4

CUT AND REMOVE

THE SPEAKER WIRE

JUNCTION CONNECTORS

WHITE - LF SPEAKER (+)

WHITE/BLACK - LF SPEAKER (-)

GRAY - RF SPEAKER (+)

GRAY/BLACK - RF SPEAKER (-)

WIRING DIAGRAM without an Amplifier

CONNECT IF EQUIPPED

YELLOW/GREEN (NOT CONNECTED)

Andere Handbücher für maestro Rr

Andere iDataLink Autozubehör Handbücher

iDataLink

iDataLink Maestro HRR-HO1 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro mus1 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink ADS-AL-CH4 Bedienungsanleitung

iDataLink

iDataLink ADS-MRR2 Bedienungsanleitung

iDataLink

iDataLink ADS-TBSL-FM-EN Bedienungsanleitung

iDataLink

iDataLink maestro Pr 2 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink ADS-ALCA Bedienungsanleitung

iDataLink

iDataLink BLADE-AL(TB)-TL2 Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink Maestro AR Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung