IDTECH ViVOpay VP3300 Series Bedienungsanleitung

ID TECH

10721 Walker Street, Cypress, CA 90630-4720

Tel: (714) 761-6368 Fax (714) 761-8880

www.idtechproducts.com

VP3300/VP3300C/VP3300E

User Manual

80149509-001 Rev. N

4 May 2021

Page | 2

ID TECH

10721 Walker Street

Cypress, CA 90630 USA

This document, as well as the software and hardware described in it, is furnished under license

and may be used or copied online in accordance with the terms of such license. The content of this

document is furnished for information use only, is subject to change without notice, and should

not be construed as a commitment by ID TECH. While every effort has been made to ensure the

accuracy of the information provided, ID TECH assumes no responsibility or liability for any

unintentional errors or inaccuracies that may appear in this document. Except as permitted by

such license, no part of this publication may be reproduced or transmitted by electronic,

mechanical, recording, or otherwise, or translated into any language form without the express

written consent of ID TECH.

ID TECH and ViVOpay are trademarks or registered trademarks of ID TECH.

Warranty Disclaimer

The services and hardware are provided "as is" and "as-available" and the use of the services and

hardware are at its own risk. ID TECH does not make, and hereby disclaims, any and all other

express or implied warranties, including, but not limited to, warranties of merchantability, fitness

for a particular purpose, title, and any warranties arising from a course of dealing, usage, or trade

practice. ID TECH does not warrant that the services or hardware will be uninterrupted, error-free,

or completely secure.

Page | 3

FCC warning statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

The user manual for an intentional or unintentional radiator shall caution the user that changes or

modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Note: The grantee is not responsible for any changes or modifications not expressly approved by

the party responsible for compliance. Such modifications could void the user’s authority to

operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter and must be installed to provide a separation distance of at

least 20cm from all persons.

Cautions and Warnings

Warning: Avoid close proximity to radio transmitters, which may reduce the

capabilities of the reader.

Page | 4

Revision History

Date

Rev

Changes

Author

04/08/2021

Implemented Revision History

Added VP3300BT Mounting and EMV Contactless Logo Requirements

05/04/2021

Added note about ECP 2.0 support in Major Features and Contactless NFC

Features sections

Page | 5

Table of Contents

1. INTRODUCTION..........................................................................................................................................................................6

1.1. Major Features of the VP3300 Family.......................................................................................................................6

1.2. Magnetic Stripe Features (VP3300 only) ..................................................................................................................7

1.2.1. ICC Contact Card Features (VP3300, VP3300E).............................................................................................7

1.2.2. Contactless NFC Features.....................................................................................................................................7

1.3. Supported USB Interfaces..............................................................................................................................................8

1.4. Before Using VP3300 Products ...................................................................................................................................8

1.5. Electrical Power.................................................................................................................................................................8

1.6. LED Status and Audible Beeper During Transactions and Operation...............................................................8

1.7. Other Agency Approvals and Compliances ...............................................................................................................9

2. FOR SOFTWARE DEVELOPERS: SOFTWARE DEVELOPMENT SUPPORT............................................................. 10

2.1. Best Practices for VP3300 Developers................................................................................................................... 10

2.2. USDK Demo App ............................................................................................................................................................ 11

2.3. Updating VP3300 Firmware....................................................................................................................................... 13

2.4. What Kind of USB Cable to Use with a VP3300 ................................................................................................... 15

2.5. VP3300 Mounting and EMV Contactless Logo Requirements........................................................................ 15

3. VP3300 TROUBLESHOOTING............................................................................................................................................. 16

3.1. Checking for Power Issues.......................................................................................................................................... 16

3.2. Checking for Connectivity Issues .............................................................................................................................. 16

3.3. Testing in the USDK Demo App................................................................................................................................. 18

3.4. Further Issues................................................................................................................................................................. 20

4. FOR MORE INFORMATION.................................................................................................................................................. 20

Page | 6

1. Introduction

The ViVOpay VP3300 is ID TECH's family of ultra-compact, EMV L1- and L2-certified contactless

card readers, designed for low cost, high reliability, and maximum compatibility with existing

contactless payment technologies (including Apple Pay, Google Pay, and Samsung Pay).

The VP3300 family includes models with and without contact-EMV capability, as well as with and

without magnetic swipe reader (MSR) functionality. The VP3300C, which offers contactless-

transaction capability without contact-EMV or MSR, provides an extremely cost-effective way for

merchants to add tap-and-go capability to existing payment options without the need to replace

other hardware. Likewise, the VP3300E offers an economical way for merchants who already

have MSR capability to add contact-EMV and NFC functionality.

The VP3300 series incorporates the proven EMV L2 kernel of ID TECH's popular UniPay III card

reader. Developers can integrate VP3300-series products into EMV-ready terminal systems with

minimal effort using ID TECH's Universal SDK, available for Windows, Android, or iOS.

1.1. Major Features of the VP3300 Family

•Micro-USB port for communications and power

•Magnetic stripe support (VP3300 only): ISO 7810/ISO 7811, Hi-Co+Lo-Co Magnetic,

JIS1/JIS2

•MSR (VP3300 only) is bidirectional, reading up to 3 tracks of data at once

•ICC support (VP3300 and VP3300E): EMV Level 1 and EMV L2 approvals; all L1 & L2 on

the device

•Contactless transaction support via Near Field Communication (NFC): all models

•LED status indicator

•Audio feedback

•Field upgradable firmware

•Standby mode for low power consumption

•Compact and ergonomic design to integrate with a variety of devices

•Available with a sturdy stand for tabletop use

•TDES and AES 128 encryption support

•DUKPT key management

•Software Development Kits for Windows, Android, iOS

•One-year manufacturer's warranty

•Supports 16 contact and 16 contactless AIDs, for a total of 32 AIDs

•ECP 2.0 Support1

Feature

VP3300

VP3300C

VP3300E

Contactless reader (NFC capability)



ICC reader with landing contacts and

EMV L1 and L2 certification



3-track MSR (magstripe reading)



1Supported in NEO 1.10.035 and above. Not supported in NEO 1.01 firmware.

Page | 7

Feature

VP3300

VP3300C

VP3300E

EMVCo Contactless L1 and major card

brand contactless certifications (L2’s)



Compact Size



4 Green LEDs for contactless indication



Audio feedback to signal good and bad card reads,

etc. 

TDES and AES encryption algorithms



Supports ID TECH standard TR31 (and optional

TR34) Remote Key Injection 

Supports multiple key slots



RoHS and REACH compliant



One year manufacturer warranty



1.2. Magnetic Stripe Features (VP3300 only)

•ISO 7810 / ISO 7811

•AAMVA format

•JIS I / II

•Single / Dual / Triple Track Support

•Bi-directional reading

•Samsung Pay MST

1.2.1. ICC Contact Card Features (VP3300, VP3300E)

•EMVCo Contact Level 1 & 2 compliant

1.2.2. Contactless NFC Features

•ISO 14443 Type A & B

•ISO 18092 (P2P)

•MasterCard® MCL (Formerly PayPass)

•Visa payWave/VCPS

•Visa IRWIN

•Discover® DPAS

•American Express® ExpressPay

•MIFARE

•Apple Pay

•Apple VAS Loyalty

•Samsung Pay NFC & MST

•Google Pay

•Google SmartTap Loyalty

•ECP 2.0 Support2

2Supported in NEO 1.10.035 and above. Not supported in NEO 1.01 firmware.

Page | 8

1.3. Supported USB Interfaces

•USB-HID or USB-KB

1.4. Before Using VP3300 Products

Devices in the VP3300 family are compact micro-USB devices for handling contactless

transactions. Each VP3300-series device is designed to operate in conjunction with certified third

party payment software and compatible hosts, such as USB-equipped tablets, PCs, and

smartphones. Before connecting a VP3300 to its host, install and activate the software

application service according to the instructions provided by the payment application service or

software provider, then connect the VP3300 to the host through a micro-USB cable (not

included).

Note: Not all mobile devices allow connections to external USB devices via USB On-The-Go

cables. If a mobile device does not support OTG cables, it will not recognize a VP3300,

preventing a VP3300 from working with the ID TECH USDK Demo or any mobile merchant

apps. Verify OTG cable support with the mobile device manufacturer.

1.5. Electrical Power

State

Typical Current Draw

Current Draw with Buzzer On

Idle (Poll on Demand, Contactless OFF)

80 mA

Maximum 230 mA

Idle (Poll on Demand, Contactless ON)

400 mA

Maximum 530 mA

Autopoll Mode

400 mA

Maximum 530 mA

Transactions per battery charge:

250 MSR + 125 EMV + 125 EMV CTLS transactions (Total 500 transactions) per charge.

1.6. LED Status and Audible Beeper During Transactions and Operation

Device Status

4 LEDs

Audible Beeper

Run Mode

Left LED Flash 300ms on/5s off

Contactless Read Successful

All 4 LEDs flash Once

1 longer beep

Contactless Read Failed

2 short beeps

ICC is being Processed

Left LED flashes: 500ms on/off;

DO NOT remove card

Magnetic Stripe Read Successful

All 4 LEDs flash Once

1 longer beep

Magnetic Stripe Read Failed

2 short beeps

Physical Specifications (VP3300, VP3300C, VP3300E)

Item

Specification

Physical Dimensions

64mm x 49mm x 14.5mm(LxWxH)

Structure Material

Plastic, PC UL 94V-0

Texture

MT11010

Weight

50g

Page | 9

Operation and Storage Environment

Item

Specification

Note

Operating Temperature

0 °C to 55 °C

1. Non-condensing.

2. Product operation temperature is limited to the

range for the reason of the constraint of Li-

Battery specification.

Storage Temperature

-20 °C to 60 °C

Non-condensing.

2. Product storage temperature is

limited to the range for the reason of

the constraint of Li-Battery

specification.

Operating Humidity

5% to 95%

Non-condensing

Storage Humidity

5% to 95%

Non-condensing

1.7. Other Agency Approvals and Compliances

•CE (EN55022/EN55024, Class- B)

•FCC (Part 15, Class-B)

•RoHS (DIRECTIVE 2011/65/EU)

•REACH

•EMV Contact L1 & L2

•EMV Contactless L1

Page | 10

2. For Software Developers: Software Development Support

VP3300 devices are designed to be compatible with a wide range of third party payment

applications. ID TECH offers a Universal SDK for iOS, Android, or Windows to enable rapid

application development with any model of VP3300 as the target device. Supported languages

include Objective C (on iOS), Java (on Android), and C# (on Windows). The Universal SDK includes

rich, powerful libraries that make communication with VP3300 comparatively easy while greatly

facilitating debugging.

Normally, development of applications that take advantage of VP3300 capabilities can be done in

a high-level language like Java or C# (using convenience objects and data structures), obviating

the need to send hex-code commands directly via USB-HID.

Nevertheless, if you need to communicate with the device via audio jack or via USB-HID, it is

possible to do so. For a command reference for VP3300-series products, consult the NEO

Interface Developers Guide (IDG), P/N 80139403-001.

2.1. Best Practices for VP3300 Developers

When developing payment applications for Android and iOS, make sure to consult the ID TECH

Universal SDK Guide for your respective platform for best practices to follow. Download the

Universal SDK Guide from the VP3300 product page as part of the ZIP file for your development

platform.

ID TECH strongly recommends that integrators include a way for users to update their

passwords.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IDTECH Kartenleser Handbücher

IDTECH

IDTECH BT Mag Bedienungsanleitung

IDTECH

IDTECH VP3300 OEM Bedienungsanleitung

IDTECH

IDTECH EzWriter Bedienungsanleitung

IDTECH

IDTECH MINIMAG Bedienungsanleitung

IDTECH

IDTECH OMNI Bedienungsanleitung

IDTECH

IDTECH IDWA-332312 Gebrauchsanweisung

IDTECH

IDTECH 80140502-001 Bedienungsanleitung

IDTECH

IDTECH ViVOpay VP6300 Bedienungsanleitung

IDTECH

IDTECH Spectrum Air Bedienungsanleitung

IDTECH

IDTECH ViVOpay KioskII Bedienungsanleitung

IDTECH

IDTECH VP3300 OEM Bedienungsanleitung

IDTECH

IDTECH MiniSmart II Installationshandbuch

IDTECH

IDTECH ViVOpay VP5200 Bedienungsanleitung

IDTECH

IDTECH Xpress CM100 Bedienungsanleitung

IDTECH

IDTECH MINIMAG Gebrauchsanweisung

IDTECH

IDTECH PiP Bedienungsanleitung

IDTECH

IDTECH ViVOpay VP6300 Bedienungsanleitung

IDTECH

IDTECH ViVOpay VP3350 Gebrauchs- und Pflegehandbuch

IDTECH

IDTECH SecureHead Bedienungsanleitung

IDTECH

IDTECH MINIMAG Bedienungsanleitung

IDTECH

IDTECH clearent ID TECH VP8300 Bedienungsanleitung

IDTECH

IDTECH SREDKey Bedienungsanleitung

IDTECH

IDTECH Kiosk III Bedienungsanleitung

IDTECH

IDTECH Spectrum IIa Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch