IET Labs 1232-A Fehlerbehebungshandbuch

Model 1232-A

-AP Tuned Amplifier

and

Null Detector

User and Service Manual

♦PRECISION INSTRUMENTS FOR TEST AND MEASUREMENT ♦

TEL: (516) 334-5959 • (800) 899-8438 • FAX: (516) 334-5988

www.ietlabs.com

IET LABS, INC.

Copyright © 2005 IET Labs, Inc.

1232-A im/June 2005

formerly manufacturer by

GenRad

Long Island, NY • Email: [email protected]

♦PRECISION INSTRUMENTS FOR TEST AND MEASUREMENT ♦

TEL: (516) 334-5959 • (800) 899-8438 • FAX: (516) 334-5988

www.ietlabs.com

Long Island, NY • Email: [email protected]

IET LABS, INC.

iii

WARRANTY

We warrant that this product is free from defects in material and workmanship and, when properly used, will

perform in accordance with applicable IET specifications. If within one year after original shipment, it is found

not to meet this standard, it will be repaired or, at the option of IET, replaced at no charge when returned to IET.

Changes in this product not approved by IET or application of voltages or currents greater than those allowed by

the specifications shall void this warranty. IET shall not be liable for any indirect, special, or consequential

damages, even if notice has been given to the possibility of such damages.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUD-

ING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR

ANY PARTICULAR PURPOSE.

vii

WARNING

OBSERVE ALL SAFETY RULES

WHEN WORKING WITH HIGH VOLTAGES OR LINE VOLTAGES.

Dangerous voltages may be present inside this instrument. Do not open the case

Refer servicing to qulified personnel

HIGH VOLTAGES MAY BE PRESENT AT THE TERMINALS OF THIS INSTRUMENT

WHENEVER HAZARDOUS VOLTAGES (> 45 V) ARE USED, TAKE ALL MEASURES TO

AVOID ACCIDENTAL CONTACT WITH ANY LIVE COMPONENTS.

USE MAXIMUM INSULATION AND MINIMIZE THE USE OF BARE

CONDUCTORS WHEN USING THIS INSTRUMENT.

Use extreme caution when working with bare conductors or bus bars.

WHEN WORKING WITH HIGH VOLTAGES, POST WARNING SIGNS AND

KEEP UNREQUIRED PERSONNEL SAFELY AWAY.

CAUTION

DO NOT APPLY ANY VOLTAGES OR CURRENTS TO THE TERMINALS OF THIS

INSTRUMENT IN EXCESS OF THE MAXIMUM LIMITS INDICATED ON

THE FRONT PANEL OR THE OPERATING GUIDE LABEL.

Inhaltsverzeichnis

Andere IET Labs Laborausrüstung Handbücher

IET Labs

IET Labs 1865-FluidTester Fehlerbehebungshandbuch

IET Labs

IET Labs 1408 Series Bedienungsanleitung

IET Labs

IET Labs SRac Series Fehlerbehebungshandbuch

IET Labs

IET Labs HARS-LX Fehlerbehebungshandbuch

IET Labs

IET Labs W10MT3A Bedienungsanleitung

IET Labs

IET Labs 1404 Series Bedienungsanleitung

IET Labs

IET Labs GenRad 1403 Series Bedienungsanleitung

IET Labs

IET Labs HRRS SERIES Fehlerbehebungshandbuch

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung