IHome TIMEBOOST iBTW41 Bedienungsanleitung

Model iBTW41

QUESTIONS? visit www.ihome.com

Bluetooth Speaker + Wireless Charger

TIMEBOOST

1. iBTW41 2. AC adapter

WELCOME

Thank you for choosing the iBTW41 from iHome. This user guide will get

you up and running quickly. For more information about this and other

iHome products, please visit www.ihome.com

GETTING STARTED

This unit ships with the following items. Please check to see that all

items are present.

1. iBTW41 alarm clock

2. AC power adapter

CONNECTING THE IBTW41

Plug the included AC adapter into the DC jack on the back of the unit and

connect the plug to a working outlet not controlled by a light switch.

FEATURES & FUNCTIONS

Back

Top

DST

Switch

5V/1A USB Port

(for charging devices)

Time Set

9V/3.0A DC Jack

BATTERY

unscrew to open door

DST -1 +1 AUTO

Bottom*

Battery Back-Up

Compartment

Bluetooth

Pairing

Alarm

Volume

Set

Power/

Alarm

Reset

SNOOZE

DIMMER

Alarm

Play/Pause/

Speakerphone/Siri/Google

Snooze/

Display Dimmer

Wireless Charging Pad

*Remove battery pull tab

before use

Auto Dimmer Sensor

Display

PM Indicator

Wireless Charging

Alarm 1

Alarm 2

Low Battery

Bluetooth Mode

Bluetooth Pairing Icon

WIRELESS CHARGING

This unit will wirelessly charge Qi compatible wireless charging phones. Place

Qi compatible device face up on charging pad.

Check the lightning icon on the iBTW41 display for charging status:

Slow blinking iconDevice is charging properly.

Solid iconDevice is charged.

Rapid blinking iconDevice is not charging properly. Reposition device.

Note: The lightning icon may continue to blink slowly when iOS devices

are fully charged.

CAUTION: Remove metal protective or magnetic case from phone before

charging. When charging phone, do not place magnetic-striped or other

metal objects on the charger. Doing so could damage the object or this unit.

Qi compatible phones with metallic looking ﬁnishes will charge normally.

SETTING THE TIME

1. Press and hold the Time Set Button located on the back of the unit

for 2 seconds until the clock display ﬂashes and a beep sounds.

2. Press the –or +Buttons to adjust the clock to the current time (hold

for rapid setting). Make sure you set the correct AM/PM time. The PM

indicator appears to the left of the display; there is no AM indicator.

3. To toggle the clock display between standard 12 hour time and 24 hour

(“military”) time display, press the Alarm or Alarm Button while

the display is ﬂashing during time setting.

4. Press and release the Time Set Button to conﬁrm the current time

setting. The YEAR will ﬂash on the display. Press the –or +Buttons

to set the correct year.

5. Press and release the Time Set Button to conﬁrm the current year

setting. The month will ﬂash on the display. Press the –or +Buttons

to set the correct month.

6. Press and release the Time Set Button to conﬁrm the current

month setting. The day will ﬂash on the display. Press the –or +

Buttons to set the correct day.

7. Press and release the Time Set Button to conﬁrm settings. 2 beeps

will sound to indicate time setting mode is complete.

DAYLIGHT SAVINGS (DST) SWITCH

This unit has a DST switch on the bottom of the unit to adjust the time

for daylight saving time and standard time. By default, it is set to Auto

and will automatically adjust the time at the start and end of daylight

saving time. If you wish to adjust manually, slide the switch to +1 to add

one hour or to –1 to subtract an hour.

SETTING AND USING ALARMS

This unit features dual alarms which can be set to dierent times and alarm

sources. Each is set in the same way. Instructions are given as “Alarm

Button”; use Alarm 1 Button or Alarm 2 Button to set respective alarms.

0QVG: Each step must be completed while display is ﬂashing or setting will

time-out with any changes saved.

1. Press and hold the Alarm Button for 2 seconds until the alarm time display

and alarm icon ﬂash. A beep sounds.

2. Press the – or + Buttons to adjust the alarm time to the desired time (hold

for rapid setting).

Make sure you set the correct AM/PM alarm time. The PM

SETTING AND USING ALARMS (CONTINUED)

3. Press the Alarm Button to conﬁrm the alarm time setting. The alarm schedule will

ﬂash: 7 (every day), 5 (weekdays) or 2 (weekend only). Press the – or + Buttons to

select the desired alarm schedule.

4. Press the Alarm Button to conﬁrm the alarm schedule. The wake-to source will

ﬂash.

5. Press the – or + Buttons to select the desired wake-to alarm source: Bluetooth or

To n e .

Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no

device is detected, the alarm will default to the last tone selected.

Wake to Tone: Press the Alarm Button to conﬁrm. Press the – or + Buttons to

select the desired tone to wake to (Tone 1 -T

one 4).

6. Press the Alarm Button to conﬁrm wake-to source. The alarm volume will ﬂash.

7. Press the – or + Buttons to adjust the alarm volume.

8. Press the Alarm Button to conﬁrm the alarm settings and exit alarm setting mode.

2 beeps will conﬁrm alarm setting is complete. The alarm icon will remain on the

display, to show the alarm is armed.

*To preview the current alarm time, press and release the Alarm Button.

TURNING THE ALARM ON/OFF

1. Press the Alarm Button to toggle the alarm ON and OFF, indicated by the

related white alarm indicator.

2. When the alarm sounds, press the Power/Alarm Reset Button or the

corresponding Alarm Button (1 or 2) to disable the alarm and reset it to come

on at the same time the next day.

Snooze: When the alarm is sounding, press the Snooze/Dimmer Button to

snooze the alarm for 9 minutes.

Dimmer: Press the Snooze/Dimmer Button (when alarm is NOT sounding) to

adjust the display brightness.

SNOOZE/DIMMER

PROGRAMMABLE SNOOZE

To adjust the snooze duration:

1. Press and hold the Snooze/Dimmer Button. The unit will beep and the

snooze duration will appear on the display.

2. Use the + or - Buttons to adjust the snooze duration from 1-29 minutes.

Press the Snooze/Dimmer Button again - 2 beeps will conﬁrm setting.

This unit is equipped with a sensor that will automatically adjust the

brightness of the clock display based on ambient light in your room. When

the room is well lit, the display will adjust to Hi brightness for better visibility.

In a dark room, it will dim to a lower brightness. You can adjust the “lower

limit” of the Auto-dimmer to ﬁt your personal preference of display

brightness in a dark room.

The 3 options are:

“Auto 2” – minimum brightness setting will be level 2

“Auto 1” - minimum brightness setting will be level 1

“Auto 0” – clock display will turn FULLY OFF in a dark room

To adjust Dimmer settings:

Press the Snooze/Dimmer Button repeatedly to cycle through

brightness levels: Auto 1, Auto 2, Auto 0, Hi, 3, 2, 1, or OFF.

(Note: choosing Hi, 3, 2, 1, or OFF are ﬁxed settings and will not

auto-adjust.)

AUTO DIMMER

BLUETOOTH PAIRING

Make sure your device is ‘discoverable’ by turning on Bluetooth mode. The

ﬁrst time the iBTW41 is powered on, it will automatically enter pairing mode.

To manually pair your Bluetooth device:

1. Press and hold the Bluetooth Button on the back of the iBTW41 for

2 seconds.

2. Select ‘iHome TIMEBOOST’ on your device’s Bluetooth menu to connect.

3. If pairing is successful, the Bluetooth indicator appears solid, indicating the

iBTW41 is ready to play music.

4. To reset Bluetooth settings, press and hold the Bluetooth Button for 10

seconds.

Playing Bluetooth Audio: Press the Play/Pause/Speakerphone Button on

the unit to play or pause audio from your linked Bluetooth device. Use the

Volume Buttons to adjust the volume on the unit.

Using Speakerphone: The iBTW41 must be ON and connected to a

Bluetooth device in order to receive calls.

• Press the Play/Pause/Speakerphone Button to accept an incoming call.

• Press and hold the Play/Pause/Speakerphone Button to end/ignore a call.

Using Voice Commands: The iBTW41 must be ON and connected to a

Bluetooth device to use voice commands.

•Press and hold the Play/Pause/Speakerphone Button for 2 seconds to

activate Siri or Google Assistant.

iHome

TIME

BOOST

CHARGING DEVICES VIA USB



The unit comes with a CR-2450 back-up battery installed to maintain

clock settings in the event of a temporary power failure. Remove the

battery pull tab before use. When the battery icon on the display is

ﬂashing, it is time to replace the back-up battery.

1. Make sure the AC adapter is

connected, or you will lose your

time and alarm settings during

battery replacement.

2. Use a Phillips screwdriver to open

the battery compartment door.

3. Remove the exhausted battery from

the compartment and insert 1

CR-2450 battery, checking that the

+ side is facing you. Replace the

compartment door. Do not

overtighten.

WARNING: Lithium batteries can explode or cause burns if disassembled, shorted,

recharged, exposed to water, ﬁre, or high temperatures. Do not place loose batteries in

a pocket, purse, or other container containing metal objects, mix with used or other

battery types, or store with hazardous or combustible materials. Store in cool, dry,

ventilated area. Follow applicable laws and regulations for transport and disposal.

• Do not ingest the battery, Chemical Burn Hazard. This product contains a

coin/button cell battery. If the coin/button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does

not close securely, stop using the product and keep it away from children. If you

think batteries might have been swallowed or placed inside any part of the body,

seek immediate medical attention.

• Connect the standard size end of a USB cable

(not included) to the USB Charging Port on the

back of the unit. Connect the other end to the

charging port on your device.

• Monitor the charging on your device. Some

devices use a proprietary charging method and

will not charge using the USB port. If this

happens, you must charge your device using

the charger that came with it.

Unit must be plugged into a

working outlet to charge devices.

BATTERY BACK-UP

Bottom of Unit

DST -1 +1 AUTO

MAINTENANCE

• Place the unit on a level surface away from sources of direct sunlight or

excessive heat.

•Remove plastic protective ﬁlm from the clock display.

• Protect your furniture when placing your unit on a natural wood and

lacquered ﬁnish. A cloth or other protective material should be placed

between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water.

Stronger cleaning agents such as thinner or similar materials can damage

the surface of the unit.

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your

personal safety. However, improper use can result in potential electrical shock or ﬁre hazards. Please

read and follow all safety and operating instructions carefully before installation and use, and keep

these instructions handy for future reference. Take special note of all warnings listed in these

instructions and on the unit.

1. Do not use this product near water, and clean only with dry cloth.

2. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

3. Heat – This product should be situated away from heat sources such as radiators, heat

registers, stoves or other appliances (including ampliﬁers) that produce heat.

4. Only use attachments/accessories speciﬁed by the manufacturer.

5. Unplug this product during lightning storms or when unused for long periods of time.

6. Damage Requiring Service – This product should be serviced by qualiﬁed service

personnel when:

-Plug has been damaged.

-Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure

damaged.

-The unit exhibits a marked change in performance or does not operate normally.

7. No naked ﬂame sources, such as lighted candles, should be placed on this product.

8. Attention should be drawn to the environmental aspects of battery disposal.

9. This product is suitable for use in tropical and/or moderate climates.

10. WARNING: To reduce the risk of ﬁre or electric shock, do not expose this product to

rain or moisture.

11. Do not dispose of batteries in the household trash or ﬁre.

12. The mains plug of power adaptor is used as the disconnect device, it shall remain

readily operable.

Andere Handbücher für TIMEBOOST iBTW41

Inhaltsverzeichnis

Andere iHome Sprecher Handbücher

iHome

iHome iBT16 Bedienungsanleitung

iHome

iHome iBT682 Bedienungsanleitung

iHome

iHome iW3 air series Leitfaden

iHome

iHome iBT74 Bedienungsanleitung

iHome

iHome iBT8080 Bedienungsanleitung

iHome

iHome iBT37 Bedienungsanleitung

iHome

iHome iAVS16 Bedienungsanleitung

iHome

iHome iBT62 Bedienungsanleitung

iHome

iHome Baby iZ44 Bedienungsanleitung

iHome

iHome iBT16 Bedienungsanleitung

iHome

iHome iHRK-500S-PR Bedienungsanleitung

iHome

iHome iHPA-1500LT Bedienungsanleitung

iHome

iHome iBT33v3 Bedienungsanleitung

iHome

iHome IDM12 Bedienungsanleitung

iHome

iHome Beauty REFLECT TRIFOLD iCVBT4 Bedienungsanleitung

iHome

iHome iBT10 Bedienungsanleitung

iHome

iHome iBN27 Bedienungsanleitung

iHome

iHome iBT60 Bedienungsanleitung

iHome

iHome iW1 air series Bedienungsanleitung

iHome

iHome iBN16 Bedienungsanleitung

iHome

iHome iHM62 Bedienungsanleitung

iHome

iHome iBT562 Bedienungsanleitung

iHome

iHome Zenergy CANDLE iZBT110 Bedienungsanleitung

iHome

iHome SB-M66P Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung

iHome TIMEBOOST iBTW41 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken