Impecca IPAC08-CR Bedienungsanleitung

Portable Air Conditioner—User Manual

Aire acondicionado—Manual de usuario

Models: IPAC08-CR, IPAC-10CR

www.impecca.com

Read the following notices and information carefully to ensure proper operation of your air

conditioner unit.

This manual is solely provided for informational purposes and in no way constitutes a legally

binding document between the manufacturer, distributor, and end consumer.

Lea las siguientes indicaciones cuidadosamente para asegurar el correcto funcionamiento

de su unidad de aire acondicionado.

Este manual se proporciona únicamente con fines informativos y de ninguna manera

constituye un documento jurídicamente vinculante entre el fabricante, distribuidor y

consumidor final.

Warning: To avoid permanent damage to

unit:

Ensure it is in the upright position for at least 24 hours

before powering on the first time.

Advertencia: Para evitar daños

permanentes a la unidad:

Asegúrese de que está en la posición vertical durante al

menos 24 horas antes de encender la primera vez.

ENGLISHESPAÑOL

–1–

INTRODUCTION

Thank you for purchasing this quality Impecca portable air conditioner unit. To ensure the

longest life and highest energy eiciency of your unit, please carefully follow these operating

instructions. Keep these instructions in a safe place and consult them as needed. Please note

that constant enhancement and improvements to our air conditioning units may mean that

your model will slightly dier in appearance from the model pictured in this manual, but the

actual operation and installation of the unit remains unchanged. This manual is solely provid-

ed for informational purposes and does not constitue a binding, legal contract.

SAFETY NOTICE:

This appliance should not be used by children or mentally/physically disabled persons with-

out strict, direct supervision by a responsible adult. Never play with or around the appliance.

SAFETY INFORMATION

• Before operation, ensure your electrical installation (outlets and circuits) complies

with the power specifications found on the unit.

• Before cleaning or maintaining the air conditioner, please turn o air conditioner

and unplug the unit.

• Make sure the power cord isn’t kinked, bent, or under the weight of sharp or heavy

objects.

• Do not pull or yank the power cord to unplug the unit or move the air conditioner.

• Do not insert or unplug the power plug with wet hands.

• Only use a grounded power outlet. Make sure the grounding is functional.

• If the power cord is damaged, it must be replaced by the manufacturer or a quali-

fied technician in order to avoid fire and electrical hazards.

• Should abnormal operation occur (such as a burning smell), please disconnect

power cord immediately and contact your local dealer.

• If nobody is present to monitor the operation of the unit, please turn it o and

disconnect the power cord.

• Do not splash or pour water on air conditioner to avoid causing a short circuit or

damage to the unit.

• Do not put or hang dripping objects above the air conditioner.

• If using a drainage hose, ensure the ambient temperature remails well above

freezing (32°F or 0°C) to avoid cracking or damaging the unit.

• Keep heat sources away from the air conditioner.

• Ensure the unit is far away from fire, inflammable, or explosive objects.

• Never allow children or persons with reduced physical, sensory, or mental capabil-

ities to operate or play around the air conditioner without direct adult supervision.

• Never allow children to perform cleaning or other user-maintenance operations

without direct adult supervision.

• Never attempt to repair or disassemble the air conditioner by yourself.

• Never insert objects into the air conditioner.

ENGLISH ESPAÑOL

–2–

OPERATING CONDITIONS

• The air conditioner must be operated within the temperature range of 62°F to 95°F

(16°C to 35°C).

• The appliance is for indoor use only.

• The appliance must be positioned so that the plug is accessible.

• A perimiter of 12′′(30cm) around the air conditioner should be free of all objets.

• Do not operate the air conditioner in a humid environment.

• Please keep air inlet and air outlet clean and free of obstacles.

• During operation, close doors and windows to improve cooling eect.

• Please put the air conditioner on smooth and flat ground for operation to avoid

noise and vibration.

• This air conditioner is equipped with castors that roll on smooth, flat surfaces.

• Do not tilt or turn over the air conditioner. If there’s problem, please disconnect

the power supply immediately and contact your local dealer or technical support.

• Avoid exposing the unit to direct sunlight.

GETTING TO KNOW YOUR AIR CONDITIONER

1213 11 10

1. Control panel

2. Horizontal directional blades

3. Vertical directional blades

4. Castors

5. Remote control storage compartment

6. Power cord

7. Filter

8. Upper air intake grille

9. Lower air intake grille

10. Connector A

11. Heat exhaust pipe

12. Connector B

13. Connector C

Note: do not discard the exhaust pipe or other acces-

sories; you may need them later should you need to

change the location of your air conditioner unit.

ENGLISHESPAÑOL

–3–

USING YOUR AIR CONDITIONER

CONTROL PANEL OVERVIEW

1 2 3 4 5 6

987

1. IR receiver

2. Water condensation build-up (when illuminated)

3. Cooling A/C mode operation (when illuminated)

4. Temperature LED: Displays the desired room temperature during cooling mode. In

other modes, the display will be blank.

5. Dehumidifier mode operation (when illuminated)

6. Fan mode operation (when illuminated)

7. Mode button: Cycle between cooling mode, dehumidifier mode, and fan mode.

8. Temperature +/- buttons: Set the desired room temperature by pressing the ap-

propriate button. Temperature changes are displayed in 1° increments in the

range of 61°F (16°C) and 86°F (30°C) Note: Temperature cannot be set when using

the fan or dehumidifier modes

9. Power ON/OFF button: Use this button to turn the unit on or o.

ENGLISH ESPAÑOL

–4–

REMOTE CONTROL

4 5

6 7

1. ON/OFF button

2. Mode button

3. Temperature +/- buttons

4. Fan button

5. Swing button

6. Sleep button

7. Timer button

REMOTE CONTROL DISPLAY OVERVIEW

13 14

7 6

1. Signal transmission

2. Swingoperation(notapplicabletothisunit)

3. Sleep mode operation

4. Remote control lock

5. Fan speed

6. Set timer

7. Desired temperature

8. Heat mode (not applicable to this unit)

9. Fan mode

10. Dehumidifier mode

11. Cooling mode

12. Automatic operation

13. Start up timer activated

14. Shut down timer activated

ENGLISHESPAÑOL

–5–

USING THE REMOTE CONTROL

ON/OFF BUTTON

Press the ON/OFF button to turn the unit on or o.

MODE BUTTON

Cycle between cooling mode, dehumidifier mode, and fan mode.

TEMPERATURE +/- BUTTONS

Set the desired room temperature by pressing the appropriate button. Temperature

changes are displayed in 1° increments in the range of 61°F (16°C) and 86°F (30°C)

Note: Temperature cannot be set when using the fan or dehumidifier modes

FAN BUTTON

Cycle through dierent fan speeds between Auto, Low, Medium, and High speed. Auto

speed selects an appropriate fan speed based on ambient temperature and most ei-

cient unit operation.

SWING BUTTON

Not applicable for this model.

SLEEP BUTTON

During cooling mode, the sleep button will allow the room temperature to slightly in-

crease for more energy eicient operation.

TIMER BUTTON

• When the unit is running, press this button to program a time when the unit will

automatically turn o. While the T-OFF and H icons are flashing on the remote

control display, use the +/- buttons to determine the time the unit will shut down

in 30 minute (.5h) increments. Press the Timer button again to confirm the shut

down command.

• When the unit is powered on but not running, press this button to program a time

when the unit will automatically turn on. While the T-ON and H icons are flashing

on the remote control display, use the +/- buttons to determine the time the unit

will start up in 30 minute (.5h) increments. Press the Timer button again to confirm

the power on command.

• To cancel a timer, press the timer button to see remaining time before the timer

activates. Press the timer button again to cancel the timer.

Note: Timers can be set between the range of 30 minutes (.5h) and 24 hours. The unit must

remain plugged in for the timer to function properly.

ENGLISH ESPAÑOL

–6–

REMOTE CONTROL LOCK

1. Press and hold the + and - buttons simultaneously to activate the remote control

child lock and prevent inadvertent changes to unit settings.

2. Press the + and - buttons simultaneously to deactivate the remote control lock.

CHANGE TEMPERATURE UNITS (C° OR F°)

While the unit is o, press the - and MODE button simultaneously on the remote

control to toggle the unit readout temperature between Celsius (C°) and Fahren-

heit (F°).

REPLACING THE REMOTE CONTROL UNIT BATTERIES

1. Press gently on the tab located on the back side of the remote control unit. Li out

the battery compartment cover.

2. Replace the batteries with two AAA 1.5v batteries. Insert batteries while respecting

the polarity of the batteries (+ and - sides). Replace both batteries at the same

time; never insert an old battery with a fresh battery to avoid a battery leak.

3. Gently reinsert the battery compartment cover.

REMOTE CONTROL OPERATION NOTES

• When using the remote control, aim the controller directly at the air conditioning

units IR receiver located on the control panel.

• The remote control must have a clear line of sight to the control panel.

• Interference to remote control operation may occur in areas with fluorescent light-

ing or wireless telephones.

• When the remote control will remain unused for long periods of time, please re-

move the batteries.

• If the display appears faint or does not appear, please replace the batteries.

PRE-INSTALLATION INSTRUCTIONS

TOOLS & ACCESSORIES FOR INSTALLATION

Gather the following tools and unit accessories before beginning your installation:

UNIT & ACCESSORIES

• Air conditioning unit

• Connectors A, B, C

• Window frame (3 pieces)

• Heat exhaust duct

• Screws (x5)

• Pipe clip

• Rubber stopper

• Drainage pipe

• Pipe hoop

• Remote control batteries (2x AAA)

• Remote control

• Users manual

Note: Never use an underrated electrical cord or outlet!

ENGLISHESPAÑOL

–7–

INSTALLING YOUR UNIT

STEP 1: IDENTIFY INSTALLATION LOCATION

1. Following the steps in the pre-installation section, identify a proper installation location.

STEP 2: INSTALLATION OF THE AIR EXHAUST DUCT

1. Remove the exhaust hose and all connectors.

STEP 3: WINDOW KIT INSTALLATION

The window kit is designed for installation in most vertical or horizontal sash windows.

You may be required to slightly modify your specific installation to ensure safe and proper

use of your air conditioner unit.

Horizontal window:

Minimum width: 27.5” (70cm)

Maximum width: 48” (122cm)

Vertical window:

Minimum height: 27.5” (70cm)

Maximum height: 48” (122cm)

1. Adapt window frame size

Insert the window exhaust port fitting (#1) into your window and extend the width or

height to fill your window entirely using the adjustment plate (#2).

If the inner width of the window is less than 28”, you may need to cut the frame to adjust

the width. Cut on the OPPOSITE side (#3) side of the opening, as indicated below.

2. Insert connector C (#2) into the window frame (#1)

ENGLISH ESPAÑOL

–8–

3. Fasten the window frame

Fasten the frame (#1) to the windowsill (#2) with screws (#3) based on the dimensions be-

low corresponding to the width (horizontal window sash) (#4) or height (vertical window

sash) (#5) of the installation.

Width or height less than 28”: 2 screws

Width or height between 28” and 36.5” : 3 screws

Width or height between 36.5” and 64” : 4 screws

4. Close the window to finish installation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Impecca Klimaanlage Handbücher

Impecca

Impecca IPAC08KS Bedienungsanleitung

Impecca

Impecca IWA05KM Bedienungsanleitung

Impecca

Impecca IPAC14-LS Bedienungsanleitung

Impecca

Impecca IWA15KSFP Bedienungsanleitung

Impecca

Impecca IWAH08-KRA Bedienungsanleitung

Impecca

Impecca IWA25-QS30 Bedienungsanleitung

Impecca

Impecca IPAC-12KS Bedienungsanleitung

Impecca

Impecca ISMO-3016 Bedienungsanleitung

Impecca

Impecca IPAC10-LR Bedienungsanleitung

Impecca

Impecca IWA15-QS30 Bedienungsanleitung

Impecca

Impecca ITAH-08KSP Bedienungsanleitung

Impecca

Impecca ITAC08-LSA23 Bedienungsanleitung

Impecca

Impecca IWA15-KS30 Bedienungsanleitung

Impecca

Impecca Flex Series Bedienungsanleitung

Impecca

Impecca IWA15KSFP Bedienungsanleitung

Impecca

Impecca IWA-05NM Bedienungsanleitung

Impecca

Impecca IWA-05KM15 Bedienungsanleitung

Impecca

Impecca IWA05-QS20 Bedienungsanleitung

Impecca

Impecca IWA05KSP Bedienungsanleitung

Impecca

Impecca IPAC16-BRB Bedienungsanleitung

Impecca

Impecca IPAC16-BRB Bedienungsanleitung

Impecca

Impecca IWA05-CM15 Bedienungsanleitung

Impecca

Impecca IPAH-12K Bedienungsanleitung

Impecca

Impecca ISMO-1821 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung