Impex MARCY CLASSIC MCB-252 Bedienungsanleitung

MARCY CLASSIC

MCB-252 COMBO BENCH

W/120 lbs Weight Set

IMPEX®INC.

2801 S. Towne Ave., Pomona, CA 91766

Tel: (800) 999-8899 Fax (626) 961-9966

www.impex-fitness.com

[email protected]

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Exploded Diagram

Parts List

Warranty

Ordering Parts

Model

MCB-252

Retain This

Manual for

Reference

100302

OWNER'S

MANUAL

TABLE OF CONTENTS

BEFORE YOU BEGIN............................................................................................... 1

IMPORTANT SAFETY NOTICE................................................................................ 2

HARDWARE PACK……............................................................................................ 4

ASSEMBLY INSTRUCTIONS.................................................................................... 5

EXPLODED DIAGRAM.............................................................................................. 10

PARTS LIST..........................................................................................................…. 11

WARRANTY..........................................................................................................…. 12

ORDERING PARTS...............................................................................................…. 12

BEFORE YOU BEGIN

Thank you for selecting the MARCY CLASSIC MCB-252 COMBO BENCH

w/120 lbs weight set by IMPEX®INC. For your safety and benefit, read

this manual carefully before using the machine. As a manufacturer, we

are committed to provide you complete customer satisfaction. If you

have any questions, or find there are missing or damaged parts, we

guarantee you complete satisfaction through direct assistance from our

factory. To avoid unnecessary delays, please call our TOLL-FREE

customer service number. Our Customer Service Agents will provide

immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

13. Maximum user weight: 300 lbs.

14. Maximum weight capacity on the uprights: 120 lbs.

15. Maximum weight capacity on the leg developer: 100 lbs.

16. Maximum weight capacity on the lat bar: 100 lbs.

CARE AND MAINTENANCE

1. Lubricate moving parts with WD-40 or light oil periodically.

2. Inspect and tighten all parts before using the machine.

3. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.

DO NOT use solvents.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE

OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES

NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED

BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

WARNING LABEL PLACEMENT

The Warning Label shown here has been placed on the Cross Brace. If the label is

missing or illegible, please call customer service at 1-800-999-8899 for replacement.

Apply the label in location shown.

HARDWARE PACK

NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size.

ASSEMBLY INSTRUCTION

Tools required for assembling the machine: Two Adjustable Wrenches.

NOTE: It is strongly recommended that two or more people assemble this equipment to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the mid-span.

Secure them with two M10 x 2 ¾” Hex Bolts (#38), one Weight Storage Post (#16), two

¾” Washers (#44), and two M10 Aircraft Nuts (#47) on each end of the Cross Brace.

B.) Insert the Backrest Adjustment Bar (#8) through a selected hole on the Rear Upright

Beams to obtain desired incline of Backrest.

DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Connect the Front Stabilizer (#5) to the Main Seat Support (#3) and secure them with

three M8 x ¾” Hex Bolts (#41) and three Ø 5/8” Washers (#45). DO NOT tighten the

Bolts yet.

B.) Connect the Main Seat Support to the Cross Brace (#2). Secure it with two M10 x 2 1/8”

Bolts (#39), one Bracket (#6), two ¾” Washers (#44), and two M10 Aircraft Nuts

(#47). DO NOT tighten the Nuts and Bolts yet.

C.) Connect one end of the Diagonal Support (#4) to the Main Seat Support (#3). Secure it

with one M8 x 2 1/8” Hex Bolt (#42), one 5/8” Washer (#45) and one M8 Aircraft Nut

(#48). Connect the other end to the Front Stabilizer (#5). Secure it with one M8 x ¾”

Hex Bolt (#41) and one 5/8” Washer (#45).

D.) Securely tighten all the Nuts and Bolts. DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach the Leg Developer (#9) to the open bracket on the Front Stabilizer (#5). Secure it

with one M10 x 2 ¾” Hex Bolt (#38), one Ø ¾” Washer (#44), and one M10 Aircraft Nut

(#47). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able

to swivel.

B.) Insert two Foam Tubes (#10) halfway through the holes on the Leg Developer. Push

four Foam Rolls (#35) onto the Tubes from both ends.

C.) Attach a Spring Clip (#36) onto the weight post on the Leg Developer. DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach the Backrest Supports (#14) onto both ends of the Pivot on the Main Seat

Support (#3). Rest the other end against the Backrest Adjustment Bar (#8).

B.) Place the Backrest Board (#17) onto the Backrest Supports. Secure it with four M6 x 1

½” Hex Bolts (#43) and four ½” Washers (#46).

C.) Place the Seat Pad (#18) onto the bracket on the Main Seat Support (#3). Align the

holes and secure it with four M6 x 1 ¼” Hex Bolts (#27) and four ½” Washers (46).

D.) Attach the Arm Curl Pad (#19) to the Arm Curl Stand (#15). Secure it with two M8 x ¾”

Hex Bolts (#41) and two Ø 5/8” Washers (#45).

E.) Insert the Arm Curl Stand into the opening on the top of the Front Stabilizer (#5). Use a

Lock Knob (#37) to secure it at desired height.

DIAGRAM 4

STEP 5 (See Diagram 5)

A.) Wrap the ball end of the Cable around the Pulley (#30). Place the Pulley in the open

slot on the Lat Bar Frame (#12). Secure it with one M10 x 2” Hex Bolt (#40), two Pulley

Bushings (#29), and one M10 Aircraft Nut (#47).

B.) Slide the Weight Holder (#11) onto the Lat Bar Frame from the bottom. Connect the

Cable to the Holder with a Hook (#32).

C.) Connect the Lat Bar (#13) to the Cable with a Hook (#32). When using the Lat Pull

Down, remove the Arm Curl and place it in the storage post behind the Rear Upright

Beam. Then Insert the Lat Bar Frame into the opening on the Front Stabilizer.

DIAGRAM 5

Inhaltsverzeichnis

Andere Impex Heim-Fitnessstudio Handbücher

Impex

Impex Apex TC-2210 Bedienungsanleitung

Impex

Impex MARCY DELUXE MD-5191 Bedienungsanleitung

Impex

Impex MARCY DIAMOND ELITE MD-3401 Bedienungsanleitung

Impex

Impex MARCY MXM-5 Bedienungsanleitung

Impex

Impex MARCY MWM 1801 Bedienungsanleitung

Impex

Impex Marcy MWB-4360 Bedienungsanleitung

Impex

Impex CB 420 Bedienungsanleitung

Impex

Impex COMPETITOR WM-354 Bedienungsanleitung

Impex

Impex IRON GRIP STRENGTH TSA-5762 Bedienungsanleitung

Impex

Impex MARCY MWB-356 Bedienungsanleitung

Impex

Impex MARCY SM 2000 Bedienungsanleitung

Impex

Impex NS-1000 Bedienungsanleitung

Impex

Impex APEX II Bedienungsanleitung

Impex

Impex Circuit Fitness AMZ-986RW-BT Bedienungsanleitung

Impex

Impex SteelBody STB-98501 Bedienungsanleitung

Impex

Impex EVERLAST EVE-360 Bedienungsanleitung

Impex

Impex IRON GRIP IGS-2215 Bedienungsanleitung

Impex

Impex Marcy Diamond MD-859 Bedienungsanleitung

Impex

Impex Powerhouse Elite PHE 9000 Bedienungsanleitung

Impex

Impex APEX PT-36 Bedienungsanleitung

Impex

Impex Iron Grip Strength IGS-2110 Bedienungsanleitung

Impex

Impex MACH JD 3 Bedienungsanleitung

Impex

Impex MARCY MD-377 Bedienungsanleitung

Impex

Impex IRON GRIP STRENGTH TSA-410 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

cardiobull

cardiobull RA17 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung