Impex WM 1403 Bedienungsanleitung
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Resistance Chart
Warranty
Ordering Parts
Model
WM 1403
Retain This
Manual for
Reference
06-19-02
OWNER'S
MANUAL
POWERHOUSE HOME GYM
WM 1403
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
TABLE OF CONTENTS
BEFORE YOU BEGIN....................................................................................……….. 1
IMPORTANT SAFETY NOTICE...................................................................……….. 2
HARDWARE IDENTIFIER.....….....................................................................……….. 3
ASSEMBLY INSTRUCTIONS.........................................................................……….. 4
PARTS LIST…………………………………………………………………………………..19
WEIGHT RESISTANCE CHART………...........................................................………. 20
WARRANTY.................................................................................................…………. 21
ORDERING PARTS.......................................................................................…………21
BEFORE YOU BEGIN
Thank you for selecting the POWERHOUSE WM1403 HOME GYM by IMPEX
FITNESS PRODUCTS. For your safety and benefit, read this manual carefully
before using the machine. As a manufacturer, we are committed to provide you
complete customer satisfaction. If you have any questions, or find there are
missing or damaged parts, we guarantee you complete satisfaction through
direct assistance from our factory. To avoid unnecessary delays, please call our
TOLL-FREE customer service number. Our Customer Service Agents will
provide immediate assistance to you.
1
Toll-Free Customer Service Number
1-800-999-8899
Mon. - Fri. 9 a.m. - 5 p.m. PST
www.impex-fitness.com
IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF
35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO
RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY
OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2
3
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches, two Allen Wrenches,
and one Flat Head Screwdriver.
NOTE: It is strongly recommended this machine to be assembled by two or more people to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Main Base Frame (#6) and Rear Lower Vertical Beam (#81) to the Rear Stabilizer
(#3). Align the holes then secure them with two M10 x 2 ½” Carriage Bolts (#42), two ∅¾”
Washers (#53), and two M10 Aircraft Nuts (#55).
B.) Attach the Rear Upper Vertical Beam (#1) to the Rear Lower Vertical Beam (#81). Secure it
with four M10 x ¾” Carriage Bolts (#83), ∅¾” Washers (#53), and M10 Aircraft Nuts (#55).
C.)Attach the Rubber Bumper (#38) to the Rear Upper Vertical Beam (#1). Secure it with one M6
x 5/8” Philips Screw (#41). DIAGRAM 1
4
STEP 2 (See Diagram 2)
A.) Attach the Front Upper Vertical Beam (#5) to the Front Lower Vertical Beam (#82). Secure it
with two M10 x 2 ½” Carriage Bolts (#42), ∅¾” Washers (#53), and M10 Aircraft Nuts
(#55). DIAGRAM 2
5
STEP 3 (See Diagram 3)
A.) Attach the Front Lower Vertical Beam (#82), both Left and Right Storage Posts (#15) & (#16)
to the Main Base Frame (#6). Secure them together with two M10 x 3” Carriage Bolts (#73),
∅¾” Washers (#53) and M10 Aircraft Nuts (#55). Do not tighten the nuts and bolts yet.
B.) Secure the upper portion of Left & Right Storage Posts to the Front Vertical Beam (#5) with
one M10 x 2 ½” Carriage Bolt (#42), ∅¾” Washer (#53), and M10 Aircraft Nut (#55).
C.) Attach the bottom of the Main Seat Support (#7) to the Main Base Frame (#6). Secure it with
one M10 x 2 ½” Carriage Bolt (#42), ∅¾” Washer (#53), and M10 Aircraft Nut (#55).
D.)Attach the Main Seat Support (#7) to the Vertical Beams (#5). Secure it with two M10 x 2
3/4” Carriage Bolts (#84), ∅¾” Washers (#53), and M10 Aircraft Nuts (#55).
E.) Attach two Olympic Sleeves (#69) to both Left & Right Storage Posts.
F.) Securely tighten all nuts and bolts previously installed.
DIAGRAM 3
6
STEP 4 (See Diagram 4)
A.) Slide the Weight Holder (#2) onto the Rear Vertical Beam (#1) from the top.
B.) Attach the rear end of Upper Frame (#4) to the Rear Upper Vertical Beam (#1). Secure the
upper hole with a Small Bracket (#20), M10 x 2 3/8” Allen Bolt (#46), and ∅¾” Washer
(#53). Sure the bottom hole with a M10 x 2 3/8” Carriage Bolt (#43), ∅3/4” Washer (#53)
and M10 Aircraft Nut (#55).
C.) Place the Upper Frame (#4) on top of the Front Upper Vertical Beam (#5). Align the holes
and secure it with one Bracket (#21), two M10 x 2 ½” Carriage Bolts (#42), two ∅¾”
Washers (#53), and two M10 Aircraft Nuts (#55).
D.) Slide two Olympic Sleeves (#69) onto the Weight Holder (#2). Attach two Spring Clips (#65)
to the Olympic Sleeves. DIAGRAM 4
7
STEP 5 (See Diagram 5)
A.) Attach the Front Press Base (#12) to the Upper Frame (#4). Secure it with one 5 7/8” Axle
(#60), two ∅1” Axle Washers (#64), and two M10 Aircraft Nuts (#55). Do not over tighten
the nuts. Make sure the Base is able to swivel.
B.) Attach the Front Press Stopper (#8) and Butterfly Pulley Frame (#9) to the Front Upper
Vertical Beam (#5). Align the holes and secure them together with two M10 x 2 ½” Carriage
Bolts (#42), ∅¾” Washers (#53) and M10 Aircraft Nuts (#55).
C.) Insert the Lock Pin (#80) into the hole on the Front Press Stopper (#8) to lock the Base in
place. Note: Remove the Pin when doing Front Press exercise. Lock the pin when doing
Butterfly exercise. DIAGRAM 5
8
STEP 6 (See Diagram 6)
A.) Attach a Rubber Bumper (#38) to the Leg Developer (#11). Secure it with one M6 x 5/8”
Philips Screw (#41). Attach the Leg Developer to the bracket on the Main Seat Support (#7).
Secure it with one M10 x 3” Allen Bolt (#44), two ∅¾” Washers (#53), and one M10 Aircraft
Nut (#55).
B.) Insert the Arm Curl Stand (#67) into the top opening on the Main Seat Support. Use a Lock
Knob (#66) to secure it and obtain the desired Arm Curl exercise position. DIAGRAM 6
9
Inhaltsverzeichnis
Andere Impex Heim-Fitnessstudio Handbücher
Impex
Impex STEEL BODY Silla Rusa Bedienungsanleitung
Impex
Impex TSA-42 Bedienungsanleitung
Impex
Impex MARCY PRO TC-4699 Bedienungsanleitung
Impex
Impex IGS-6500 Bedienungsanleitung
Impex
Impex Powerhouse Elite PHE 9000 Bedienungsanleitung
Impex
Impex Marcy Platinum MP-PWR10.0 Bedienungsanleitung
Impex
Impex COMPETITOR WM-354 Bedienungsanleitung
Impex
Impex PWR SURGE Bedienungsanleitung
Impex
Impex MARCY MWM 1801 Bedienungsanleitung
Impex
Impex Marcy Diamond MD-8861 Bedienungsanleitung
Impex
Impex Iron Grip Strength IGS-4350 Bedienungsanleitung
Impex
Impex MWM 2001 Bedienungsanleitung
Impex
Impex Olympic Cage Bedienungsanleitung
Impex
Impex MARCY PLATINUM MP-2500 Bedienungsanleitung
Impex
Impex Marcy Pro NS-607RW Montage- und Bedienungsanleitung
Impex
Impex GOLD'S GYM WMGG-368 Bedienungsanleitung
Impex
Impex ADI-5100-I Bedienungsanleitung
Impex
Impex SB 681 Bedienungsanleitung
Impex
Impex MARCY MD-2082W Bedienungsanleitung
Impex
Impex POWERHOUSE WM-1501 Bedienungsanleitung
Beliebte Heim-Fitnessstudio Handbücher anderer Marken
Horizon Fitness
Horizon Fitness OXFORD 6 Bedienungsanleitung
Energetics
Energetics Multi Trainer 5.1 Bedienungsanleitung
Matrix
Matrix MG-PL Series Bedienungsanleitung
Reebok
Reebok Tbr2i Bedienungs- und Wartungshandbuch
Weider
Weider 8300 Hard Drive Bedienungsanleitung
Pure Fitness
Pure Fitness 8526HE Bedienungsanleitung
