Inficon Southern Cross IRwin Bedienungsanleitung

IRwin Quick Start Guide

Eﬀective October 2019

Southern Cross Inc.

www.southerncrossinc.com

3175 Corners North Court

Peachtree Corners, GA 30071

1.800.241.5057

Contents

How to assemble your leak detector.......................................................................................3

How to set the lower explosive limit to 5% vol........................................................................7

How to set unit to one point calibration..................................................................................9

How to set the threshold alarm.............................................................................................14

Data transfer/Bluetooth.........................................................................................................16

Charging the battery...............................................................................................................19

Troubleshooting/error messages............................................................................................22

How to set your leak detector in Universal Mode...................................................................5

How to Assemble your IRwin Methane Leak

Detector

Components of the IRwin

Bell Probe

Probe Rod

Hand Probe

How to assemble your IRwin Methane Leak Detector

Attach the probe rod to the bell probe.

Attach the hand probe to the probe rod.

Connect the probe tube of the hand probe to

the gas inlet on the leak detector.

Your unit is assembled.

How to set your IRwin Methane Leak

Detector in Universal Mode

(for a factory set unit)

For Operation in countries not following German DVGW directives

Start the device by pressing the ON button

Press followed by

Answer the function test questions and conrm test

results by pressing

Use to navigate to General and press

Use to navigate to Custom and press

How to set your IRwin Methane Leak Detector for Universal Mode

Use to navigate to Universal Mode

and press

Enter the Supervisor password code (1111 unless

changed by supervisor)

Use to navigate to Universal Mode

and press

Press to tick Universal Mode box

Press followed by and

Use to navigate to General and press

Press followed by

Use to select 100% CH4 LEL Conc

Use to navigate to Custom and press

How to set the Lower Explosive Limit (LEL)

at 5.0% vol on IRwin Methane Leak Detector

If prompted, enter the password code (1111 unless

changed by supervisor) and repeat step 4.

If not prompted, go ahead to the next step

How to set the Lower Explosive Limit (LEL) at 5.0vol% on

IRwin Methane Leak Detector

Use to select 5.0 vol% in the drop-down menu,

press

Press followed by and

How to set your IRwin Methane Leak

Detector for 1 Point Calibration

(2.5%) - Universal Mode

Use to navigate to General and press

Make sure your IRwin is set in Universal Mode (see the How to set your IRwin for Universal

Mode quick start guide)

Press followed by

Use to navigate to AbG Cal Setup and press

Use to navigate to Custom and press

How to Set your IRwin Methane Leak Detector

for 1 Point Calibration 2.5%

Use to select Generic and press

followed by

Use and to navigate to Calibration

and press

Use to navigate to Settings and press

If prompted, enter the (min) Intermediate password code

If not prompted, go ahead to next step

If prompted, enter the Supervisor (Advanced) password code

If not prompted, go ahead to next step

Inhaltsverzeichnis

Andere Inficon Sicherheitssensor Handbücher

Inficon

Inficon HLD6000 Bedienungsanleitung

Inficon

Inficon D-TEK Stratus Bedienungsanleitung

Inficon

Inficon UL6000 Fab Kurzanleitung

Inficon

Inficon XL3000flexRC Kurzanleitung

Inficon

Inficon TEK-Mate Bedienungsanleitung

Inficon

Inficon IRwin Series Bedienungsanleitung

Inficon

Inficon D-TEK Stratus 724-202-G Series Bedienungsanleitung

Inficon

Inficon GAS-Mate Bedienungsanleitung

Inficon

Inficon D-TEK 3 Bedienungsanleitung

Inficon

Inficon TEK-Mate Bedienungsanleitung

Inficon

Inficon D-TEK Stratus 724-202-G1 Bedienungsanleitung

Inficon

Inficon HLD5000 Versionshinweis

Inficon

Inficon Sentrac Strix Edition Bedienungsanleitung

Inficon

Inficon IRwin S Bedienungsanleitung

Inficon

Inficon Sensistor ISH2000 HySpeed Bedienungsanleitung

Inficon

Inficon D-TEK 3 Bedienungsanleitung

Inficon

Inficon Sensistor Sentrac Betriebsanleitung

Inficon

Inficon D-TEK Stratus Bedienungsanleitung

Inficon

Inficon D-TEK Stratus 724-202-G1 Bedienungsanleitung

Inficon

Inficon Ecotec E3000 Bedienungsanleitung

Inficon

Inficon Modul1000 Bedienungsanleitung

Inficon

Inficon IRwin S Bedienungsanleitung

Inficon

Inficon RC1000 Series Kurzanleitung

Inficon

Inficon TEK-Mate Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung