Ingenico Move 2500 Bedienungsanleitung

This manual contains detailed information

about the operation of the POS devices

Ingenico Move 2500 Ingenico Desk 3200

Content

Description of the functions of the keypad buttons 2

Purchase 3

Reversal 6

Preauthorization 8

Sale Completion 10

Manual Purchase 12

Manual Reversal 14

Handshake 17

Device Reports 18

Loading a paper roll 19

Frequently asked questions 22

Keypad button functions

Device ON/OFF

1. Navigation buttons

2. Main menu

3. Cancel button (red)

4. Delete/Paper load button (yellow)

5. Enter button (green)

6. Decimal point button

3 4 5

Move 2500

ON: long press of the green button

OFF: long press of the yellow and decimal point buttons simultane-

ously

Desk 3200

ON: plug the device into an AC power socket

OFF: long press of the red button

General device operations

PURCHASE

The PURCHASE operation can be initiated in two ways:

• By entering the purchase amount directly using the device keypad

when the device display is in ready state.

• By pressing the “Main Menu” button, selecting the “FINANCIAL

OPER.” menu and the “PURCHASE” submenu.

The device display then shows the following purchase amount entry

screen:

Enter the amount and conrm using the green button. The display

shows the following message and the device prompts the user to

read the card.

The card details can be read as follows:

Magnetic strip – slide the card through the slot on the right;

IC – insert the card into the slot in the front;

Contactless – place the card near the contactless mark at the top

. Contactless card transactions can be processed only

if the card has the contactless payment symbol on its face.

Depending on the transaction, the device may prompt the user to

enter a PIN (Personal Identication Number). The display will show

the appropriate message in this case. Enter the PIN and conrm

using the green button.

The device now has all the required information for the respective

transaction and card type. It will connect to the service bank and

proceed with the transaction processing. The display will show the

communication status. If the PURCHASE is approved, the device will

print a receipt with the respective transaction details.

Sample approved transaction receipt:

Caution!

If the device prints a POS receipt requiring a CARD HOLDER SIGNATURE, the

signature must be placed and veried with the holder’s signature on the

back of the card.

All messages displayed on the device must also be followed, because, in

some cases, it may be possible to verify the signature using the device itself.

Otherwise, the device may decline to process the respective transaction.

Caution!

The transaction is approved only when the respective receipt is printed. If no receipt

is printed, even when the device is out of paper, or the printed receipt shows a

declined transaction message, the transaction is considered declined.

If the transaction is not approved by the card issuer, the operation

will be terminated with the appropriate message.

From the main menu, select the “FINANCIAL OPER.” menu and the

“Reversal” submenu.

The device displays the following message prompting the user to

enter a password.

The password for this operation type is 1111. Enter the password

and press the green button to conrm. The device displays the

following message prompting the user to read the card.

REVERSAL

The card must be read using one of the methods described above:

- Magnetic strip

- IC

- Contactless

When the card is successfully read, the device prompts the user to

enter the receipt number to reverse:

Sample receipt with the required number:

The device displays the reversal amount and asks for a conrmation

using the green button.

Upon successful transaction reversal, the device will always print a

receipt with information on the reversed transaction.

Sample transaction reversal receipt:

A PREAUTHORIZATION is an operation where the merchant reserves

(locks) an amount on the card for an upcoming transaction to be

completed within a predened time set by the bank. Ifthe transaction

is completed successfully, the device issues an authorization code

to be used later for the SALE COMPLETION operation.

This service is available upon additional merchant approval by the

bank.

PREAUTHORIZATION

Process steps:

From the “FINANCIAL OPER.” menu, select “PREAUTHORIZATION”.

The display shows an amount entry eld.

Aer the amount is entered, the device prompts the user to read

the card. Depending on the card reading mode and the amount, the

device may require an additional PIN entry.

If the transaction is processed successfully, the device prints the

following receipt:

Andere Handbücher für Move 2500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ingenico Touch-Terminal Handbücher

Ingenico

Ingenico i5100 Bedienungsanleitung

Ingenico

Ingenico AMEX iCT220 Bedienungsanleitung

Ingenico

Ingenico AXIUM D7 Bedienungsanleitung

Ingenico

Ingenico iwl255 Bedienungsanleitung

Ingenico

Ingenico Link/2500 Bedienungsanleitung

Ingenico

Ingenico AXIUM RX5000 Bedienungsanleitung

Ingenico

Ingenico Desk 3500 Bedienungsanleitung

Ingenico

Ingenico AXIUM DOCK Bedienungsanleitung

Ingenico

Ingenico Link/2500 Bedienungsanleitung

Ingenico

Ingenico Link 2500 Bedienungsanleitung

Ingenico

Ingenico IWL 250 Bedienungsanleitung

Ingenico

Ingenico Move 2500 Bedienungsanleitung

Ingenico

Ingenico UOB Bedienungsanleitung

Ingenico

Ingenico ICT 220 Bedienungsanleitung

Ingenico

Ingenico iWL2XX Bedienungsanleitung

Ingenico

Ingenico iUI120 Kurzanleitung zur Einrichtung

Ingenico

Ingenico Desk 2600 Bedienungsanleitung

Ingenico

Ingenico FLEX IPP320 Bedienungsanleitung

Ingenico

Ingenico iSMP4 Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Ingenico

Ingenico iWL250 WIFI Bedienungsanleitung

Ingenico

Ingenico iWL250B Bedienungsanleitung

Ingenico

Ingenico Desk Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung

VeriFone

VeriFone E235 Bedienungsanleitung