Ingenico Move 5000 Bedienungsanleitung

Get to know your terminal

Contactless Reader

Printer

Enter key and Power on

Press the green ENTER key

Power o

Remove the terminal from any

power source. Press and hold

the Func and yellow CLEAR

keys together

Menu Screen

Press the grey key with

symbol Press F2 to scroll down

and F3 to scroll up on the touch

screen, or press the menu item

number on the keypad

Cancel:

Press the red CANCEL key

Clear entry

Card Insert

Troubleshooting Guide:

Move 5000

Function

Troubleshooting Terminology

General Refresh

Perform a Func 1-0-2 Enter (terminal refresh). This should result in the following print out:

General Troubleshooting

Reboot

• Hold FUNC + Clear keys.

• If the pinpad is connected to power it will turn on automatically.

• If the pinpad is not connected to power, hold Enter key until the screen turns on.

Turn o

• Make sure pinpad is NOT connected to power, then hold FUNC + Clear keys until it turns o.

Turn on

• Hold Green key until pinpad turns back on, or Connect terminal to power

Powercycle

• Ensure pinpad is NOT connected to power

• Hold FUNC + Clear keys until pinpad turns o

• Open the back cover and remove battery

• Wait 30 seconds

• Connect battery and put cover back on

• Hold Enter key until pinpad turns back on / connect pinpad to power

Logon

• Press FUNC key

• Type 110, then press Enter

Start of Day Checks

Make sure your terminal is on

To logon, please press Func 1-1-0 Enter. The Till logo should appear on

screen.

Logon Troubleshooting

If terminal logon is unsuccessful, please check to make sure the terminal

was previously settled. If not settled, perform a settlement

1. If settlement is declined, please perform Func 1-0-2 Enter and

follow the above steps.

2. If still unsuccessful, please email support@tillpayments.com.

The terminal does not turn on

• Check the battery (is it discharged, is it connected).

• A full discharged battery may require a long charging time to recover.

• Connect terminal to terminal power supply or put it on the powered base.

• Check if the battery symbol is flashing or moving (= battery charging)

• Identify possible quick ﬁxes such as loose or faulty cables, charger connection

• Check power outlet

Cards not removed

• Check that the magnetic card is swiped correctly (with magnetic band on terminal

side).

• Swipe again the card with the magnetic stripe movement constant and rapid

• Verify that the magnetic strip is not damaged, grooved or cracked

• Make sure you have inserted correctly the smart card into the smart card reader

and removed the card only after the transaction Is performed

The receipt has not printed

If terminal is newly delivered and printer is slowly printing or struggles to print this will improve

over the next few prints. Otherwise:

• Open the receipt latch and remove the paper.

• Check printer for damage. If the printer lid is damaged or the COG is missing, please

contact Till Payments Support.

• If there is no damage, ensure that the paper is inserted correctly into the terminal.

• Hold the paper feed / perform a logon to test printer.

• If terminal is still not feeding paper, ensure that the pinpad has suicient power.

No SIM Error

• Ensure the pinpad is not connected to power and hold FUNC + Clear until the termi-

nal is o.

• Open the back cover and ensure the SIM is inserted securely. Hold the Enter key to

power terminal back on.

• If signal bars display, perform FUNC 110 to test logon.

Declined 13: Over Refund Limit

• The refund being performing is over the conﬁgured limit. Contact Till Payments Sup-

port to discuss refund limit

To Clear Reversal

• Press Func key

• Type 23, then press enter

• Press Func 110, then enter to initiate a bank logon

Delayed Response

If terminal appears to be slow or freezing, please ensure battery is charged in the ﬁrst instance.

• If terminal is frozen on screen, perform a Func Clear when terminal is in power.

This should cause the terminal to restart.

• If the above step fails, remove from power and perform Func Clear to shut down

terminal. Once terminal is shut down, hold Enter to reboot.

• Perform a terminal refresh (Press Func102, then press enter)

• Perform a bank logon (Press Func110, then press enter)

• Repeat above steps if further troubleshooting is required.

General Troubleshooting (continued)

Blue Screen / Black Screen

• Hold FUNC + Clear to turn o the terminal

• Hold Enter key to power back on, ensure no other buttons are being held

• If this doesn’t resolve the issue, powercycle the terminal.

Terminal Returns to Idle Screen After Entering a Function

• Hold FUNC + Clear keys to power o/ reboot terminal

Declined X0

• X0 is a common communications fault. Perform a reboot on the pinpad, then try

FUNC 110.

• If the issue persists, ensure that there are no Telstra outages in the area.

Declined W0 (This applies to standalone terminal connected to wiﬁ/ethernet)

• The sites internet is likely not working. If the sites internet is working, then a ﬁrewall is

blocking the pinpad from connecting to the internet.

Pinpad Oline Error Message on POS (This applies to integrated terminal)

• Check power, usb/serial cables are connected properly to the charging base

• Check cables connected to POS are connected securely

• Check power outlet

• Restart terminal and POS

General Troubleshooting (continued)

Need a bit of help?

Please email support@tillpayments.com or

call 1300 369 692

Our dedicated team of experts can assist you over the phone 24/7 with

questions, problem resolution and extra training. Keep your merchant ID

number handy when you call, this will help speed up your enquiry.

A comprehensive user guide to the EFTPOS terminal can be download-

ed on our website. The site is equipped to keep you up to date with

news, forms and guides, security and fraud prevention information,

access to our online reporting tool and much more.

www.tillpayments.com | 1300 369 692 | support@tillpayments.com

Andere Handbücher für Move 5000

Inhaltsverzeichnis

Andere Ingenico Touch-Terminal Handbücher

Ingenico

Ingenico Link/2500 Bedienungsanleitung

Ingenico

Ingenico i5100 Bedienungsanleitung

Ingenico

Ingenico iCMPsi Bedienungsanleitung

Ingenico

Ingenico Lane 3000 Bedienungsanleitung

Ingenico

Ingenico iWL258 Bedienungsanleitung

Ingenico

Ingenico Move 2500 Bedienungsanleitung

Ingenico

Ingenico AXIUM DX8000 Bedienungsanleitung

Ingenico

Ingenico AXIUM RX5000 Bedienungsanleitung

Ingenico

Ingenico AXIUM D7 Bedienungsanleitung

Ingenico

Ingenico AXIUM DOCK Bedienungsanleitung

Ingenico

Ingenico FLEX IPP320 Bedienungsanleitung

Ingenico

Ingenico DESK/5000 Technisches Datenblatt

Ingenico

Ingenico Link 2500 Bedienungsanleitung

Ingenico

Ingenico iWL2XX Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

Ingenico

Ingenico FLEX IPP320 Einrichtungshandbuch

Ingenico

Ingenico DESK/3500 Bedienungsanleitung

Ingenico

Ingenico Telium Bedienungsanleitung

Ingenico

Ingenico iUI120 Kurzanleitung zur Einrichtung

Ingenico

Ingenico iCT Series Bedienungsanleitung

Ingenico

Ingenico AMEX iCT220 Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Ingenico

Ingenico iwl255 Bedienungsanleitung

Ingenico

Ingenico ICT 220 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung