Innovative Concepts in Entertainment MESMERIZER Bedienungsanleitung

OWNERS AND SERVICE MANUAL

10123 MAIN STREET, CLARENCE, NEW YORK 14031

SERVICE 716-759-0360 SALES 716-759-0370 FAX 716-759-0390

E MAIL play@icegame.com

TABLE OF CONTENTS

• INTRODUCTION / INSTALLATION

• PROGRAMMING OPTIONS

• TROUBLESHOOTING

• PARTS LISTINGS

• SCHEMATICS

• WARRANTY INFORMATION

INTRODUCTION & SET-UP

FEATURES

Thank you for purchasing the new

MESMERIZER™ coin operated amusement

game from I.C.E. Please read this manual to fully

understand the operation and servicing of this

game.

This game has been designed to be as trouble

free as possible. Our latest technology has been

employed to assure the best quality and game

ownership experience.

MESMERIZER™ incorporates simple one button

game play to assure the widest audience base

possible. Everybody "WINS" with

MESMERIZER™, but multiple wins can get you

the big Ticket Bonus. The easy game play

assures repeat business and lots of fun for the

game player.

Our cabinet design is a unique blend of material

components.

A special high quality marine grade plywood is

used to assure unparalleled strength and

moisture resistance.

The Upper cabinet and dome are made of impact

resistant plastics to assure years of good

durability and looks.

The lower cabinet is constructed of wood, plastic

and Special Epoxy powder coated steel panels.

All of the electronics in MESMERIZER™ have

been designed using proven technology to

assure the greatest reliability possible.

An integrated high quality audio amplifier has

been used to assure the best quality sound

reproduction.

A bright, backlit printed multi-colored spinning

wheel and flashing red neon light ring compliment

the "Groovy" 60's theme of the game.

SET-UP

The MESMERIZER™ game is almost ready to go

with just a little bit of set-up.

The game comes fully assembled other than the

top Marquee.

To install the marquee, connect the harnesses

for the strobe and florescent lighting, and install

the (4) four 1/4-20 kep nuts to install the marquee

to the back of the game.

That's it! Program your game as shown in the

next section, and you're ready to go!

PROGRAMMING OPTIONS

USING THE

PROGRAMMING

BUTTONS

There are 4 buttons on the cash box enclosure of

the game. (Inside coin door) Their operation is

detailed below.

PROGRAMMING BUTTON - This button is used

to enter and exit the programming mode. Quickly

depress and release the button.

SELECT BUTTON - This button is used to select

which programming option you would like to

adjust. Quickly depress and release the button to

move through the options. NOTE: The options

will be displayed on the control panel display.

STEP BUTTON - This button is used to step

through and CHANGE the value of any particular

option. Quickly depress and release the button

to move through the option values. NOTE: The

option values are shown on the large BONUS

display on the back cabinet of the game.

RESET BUTTON - This button is used to reset or

cancel the tickets owed in the game. Use this

button when reloading tickets if you do not want

the game to finish paying out what it might owe.

COINS PER CREDIT

(OPTION #1)

This option determines how many coins it takes

to play 1 game. The range for this option is 0-8.

Setting a “0” puts the game into free play mode.

The default value for this mode is “1”

ATTRACT MINUTES

(OPTION #2)

This option determines how many minutes

between the attract mode. The range for this

option is 0-90 minutes. Setting a “0” turns the

attract mode off. The default value for this option

is 5 minutes.

HITS TO WIN

(OPTION #3)

This option determines how many successful hits

in a row are necessary to win the game and

receive the bonus. The range for this option is 8-

16 hits. The default value for this option is 10.

WHEEL R.P.M. START

SPEED

(OPTION #4)

This option determines the starting (or static)

R.P.M. (speed) of the wheel. On a game using

the skill speedup option, this will be the start up

speed. On a game not using the speedup option,

this will be the constant wheel speed. The range

for this option is 6-16 R.P.M. The default value

for this option is “10”.

DO SKILL SPEEDUP

(OPTION #5)

This option determines whether or not the wheel

speed will increase over the duration of the

game. Setting a “1” enables this option. The

default value for this option is “1”

PROGRAMMING OPTIONS

DIFFICULTY /

NARROWING PCT.

(OPTION #6)

This option determines if the game will

electronically increase the difficulty of the game

by narrowing the “win” wedge opening by a

certain percentage. The percentage of opening

can be decreased by 1-45 percent. Setting a “0”

turns off the difficulty option. Setting a “45” would

decrease the hittable area by 45 percent. The

default value for this option is “25”

MINIMUM BONUS /

RESET VALUE

(OPTION #7)

This option determines the value of the jackpot

OR the minimum value of the jackpot in a

progressive bonus arrangement. The range of

this option is 50 – 200. The default value for this

option is “50”

MAXIMUM BONUS

(OPTION #8)

This option determines the Maximum value of the

bonus in a progressive jackpot set-up. The range

of this option is 199-999. The default value for

this option is “499”.

BONUS INCREMENT

(OPTION #9)

This option turns on the progressive bonus

option, AND determines how much the bonus will

go up each time the game is played and nobody

wins. Setting a “0” turns the progressive option

off. The range for this option is 0-20. The default

value for this option is “0”.

BONUS NOW

(OPTION #10)

This is an accounting mode that tells you the

present value of the bonus payout.

CLEAR BONUS

(OPTION #11)

This option will clear the bonus value and return it

to the minimum value.

BASE TICKETS FOR

LOSING

(OPTION #12)

This option determines how many tickets are

given out just for plating regardless of any other

ticket settings. The range of this option is 0-9.

Setting a “0” turns this option off. The default

value for this option is “1”

HIT STEPS FOR NEXT

TICKET INCREMENT

(OPTION #13)

This option determines how many “wins” are hit

before the ticket amount will increase. The range

for this option is 1-5 “wins”. The default value for

this option is “1”

PROGRAMMING OPTIONS

TICKET AMOUNT PER

STEP

(OPTION #14)

This option determines the amount of tickets that

will be dispensed each time the next payout step

(as set in option 13) is reached. The range for

this option is 0-9. The default value for this option

is “1”

ACCOUNT CREDITS

(OPTION #15)

This option tells you how many credits have been

played since the last accounts cleared.

ACCOUNT WINS

(OPTION #16)

This option tell you how many times the bonus

has been won since the last accounts cleared.

ACCOUNT, TICKETS

(OPTION #17)

This option tells you how many tickets have been

won since the last accounts cleared.

THE FOLLOWING OPTIONS (18-33)

TELL YOU HOW MANY 1 HIT, 2 HIT, 3

HIT, ETC. GAMES HAVE BEEN

PLAYED. THIS WILL HELP YOU

GAUGE FURTHER THE PLAYER

PROFILE OF YOUR LOCATION. THIS

CAN HELP TO SET UP THE GAME

FOR GREATER EARNINGS.

18. 1 HIT GAMES

19. 2 HIT GAMES

20. 3 HIT GAMES

21. 4 HIT GAMES

22. 5 HIT GAMES

23. 6 HIT GAMES

24. 7 HIT GAMES

25. 8 HIT GAMES

26. 9 HIT GAMES

27. 10 HIT GAMES

28. 11 HIT GAMES

29. 12 HIT GAMES

30. 13 HIT GAMES

31. 14 HIT GAMES

32. 15 HIT GAMES

33. 16 HIT GAMES

ACCOUNT CLEAR

(OPTION #34)

This option clears ALL of the accounting

information. Setting a “1” enables the reset

option. The default value for this option is “0”

FACTORY RESET

(OPTION #35)

This option clears ALL of the custom game

settings as well as all of the accounting

information. Setting a “1” enables the reset

option. The default value for this option is “0”

PROGRAMMING OPTIONS

MOTOR PULSE WIDTH

MODULATION TEST

(OPTION #36)

This is a factory / diagnostics test to see that the

motor is capable of delivering at least 16 R.P.M.

TROUBLESHOOTING

GAME WILL NOT TAKE OR ADD MONEY CORRECTLY

·Micro switch not working or returning properly. Check and repair or replace as necessary.

·Bad Harnessing or connector. Check w/ohm meter and repair as necessary.

·Game programming set incorrectly. Check programming option and re-program if necessary.

·Bad Main P.C. Board. Check and repair or replace as necessary.

HIT BUTTON WILL NOT FLASH WHEN GAME HAS CREDITS, OR WORK WHEN PUSHED

·Micro switch not working properly. Test and replace as necessary.

·Micro switch popped out of housing. Snap back into housing.

·Burned out light bulb. Replace light bulb.

·Bad harnessing or connector. Check w/ohm meter and repair as necessary.

·Bad Main P.C. Board. Check and repair or replace as necessary.

GAME HAS NO SOUND

·Bad speaker. Check w/ohm meter for 4 or 8-ohm load. If not within this range, replace.

·Volume level set incorrectly. Check volume level in programming, and adjust if necessary.

·Bad Harnessing or connector. Check w/ohm meter and repair as necessary.

·Bad Main P.C. Board. Check and repair or replace as necessary

TICKET DISPENSER DOES NOT WORK OR WORKS IMPROPERLY

·Bad ticket dispenser. Repair or replace as necessary.

·Bad harnessing or connector. Check w/ohm meter and repair as necessary.

·Bad Main P.C. Board. Check and repair or replace as necessary.

·Game out of tickets. Add tickets

·Optical sensor on ticket dispenser dirty. Remove paper fuzz and debris with a soft brush.

NO FLORESCENT LIGHTING

·Bulb burned out. Replace bulb.

·Electronic ballast bad. Replace ballast.

·Harness bad or harness unplugged. Check w/ohm meter and plug in, repair or replace as necessary.

·No A.C. power to the game or Main fuse bad. Check fuse and A.C. power.

WHEEL WILL NOT SPIN OR SPIN PROPERLY

• Motor burned out. Replace motor.

• Motor drive transistor burned out. Replace drive transistor.

• Main P.C. Board damaged. Repair or replace Main P.C. Board.

• Motor harnessing damaged. Repair damaged harnessing.

• Wheel position optical transmitter or receiver bad. Repair or replace as necessary.

• Wheel position optical sensor blinded by light. Make sure light shroud is secure around sensor.

GAME WILL NOT SCORE PROPERLY

• Main P.C. Board damaged. Repair or replace Main P.C. Board.

• Motor harnessing damaged. Repair damaged harnessing.

• Wheel position optical transmitter or receiver bad. Repair or replace as necessary.

• Wheel position optical sensor blinded by light. Make sure light shroud is secure around sensor.

• Score LED damaged. Repair or replace as necessary.

RING LIGHTS, NEON, OR STROBE LIGHT WILL NOT FLASH OR WORK PROPERLY

• Drive transistors on Main P.C. board bad. Replace drive transistors.

• Bulb or tube burned out. Replace tube or bulb.

• Harnessing bad. Repair or replace as necessary.

IF YOU HAVE ANY FURTHER QUESTIONS OR COMMENTS, PLEASE CONTACT OUR

SERVICE DEPARTMENT AT 1-716-759-0360 - MONDAY THRU FRIDAY 8:00AM - 5:00PM

PARTS LISTINGS

MECHANICAL PARTS

FP1004 Leg Leveler Mounting Bracket

MZ1016 Arrow, Large

MZ1017 Arrow, Small

MZ1018 Deflector cover

FP1019 Leveler Foot, Long

BW2017 Plastic Fluorescent Bulb Clip

BW2018 Plastic Fluorescent Bulb Support

BZ3006 Zamperella Bulb Assy. - Yellow

MZ3006 Zamperella Bulb Assy. - Clear

MZ3006A Zamperella Bulb Assy. - Red

MZ3006B Zamperella Bulb Assy. - Orange

MZ3006C Zamperella Bulb Assy. - Green

MZ3006D Zamperella Bulb Assy. - Blue

MZ3009X Playfield Hub Assembly

MZ3021 Plastic bolt Cap

MZ3023X Marquee Assembly

MZ3024 Mesmerizer Dome

ELECTRICAL /

ELECTRONIC PARTS

MZ2001X Neon Transformer

MZ2003X Neon Light Ring Assembly

MZ2003RX Receiver P.C. Board Assembly

MZ2003TX Transmitter P.C. Board Assy.

MZ2005 Round Push Button, 4" White

AR2007 Speaker, 6" X 9"

MZ2008X Playfield Motor

CC2027 Power Cord, 20 Ft. Comp. Style

MZ2032X Message Display P.C. Board

MZ2033X Bonus Display P.C. Board

MZ2034X Main P.C. Board

MZ2035X Strobe Light Assembly

MZ2050X Door Harness

HH2050 Power Module

MZ2055X Power Module Harness

MZ2060X Opto / Motor Harness

MZ2061AX Power Extension Harness

MZ2064X Neon Transmitter Harness

MZ2066X Transformer Extension Harness

MZ2067X Motor Drive Transistor Harness

HH5005 Ticket Dispenser

8201 TIP 125 Transistor

MZ8284X Ballast Assembly

8312 PLL-40W/41/RS/IS Fluorescent

GRAPHICS

MZ7000 Podium, Left Side Decal

MZ7001 Podium, Right Side Decal

MZ7002 Hub Cover Decal

MZ7003 Playfield Decal

MZ7004 Light Ring Decal

MZ7005 Push Button Decal

MZ7006 Control Panel Side Decal

MZ7007 Base Front Overlay Decal

MZ7008 Control Panel Overlay Decal

MZ7010 Base Front Strip Decal

MZ7012 "Hit Red" Decal, Large

MZ7013 "Hit Red" Decal, Small

MZ7014 ICE Logo Decal

MZ7021 Programming Decal

MZ7027 Marquee Decal

MZ9010 Service Manual

WARRANTY

I.C.E warrants all components in the MESMERIZERÔgame to be free of

defects in materials and workmanship for a period of ninety days from the

date of purchase.

This warranty does not cover items damaged due to normal wear and tear,

subjected to abuse, improperly assembled by the end user, modified,

repaired, or operated in a fashion other than that described in the service

manual.

If your MESMERIZERÔgame fails to conform to the above-mentioned

warranty, I.C.E.'s sole responsibility shall be at its discretion to repair or

replace any defective component with a new or remanufactured

component of equal to or greater O.E.M. specification.

I.C.E. will assume no liability whatsoever, for costs associated with labor to

replace defective parts, or travel time associated therein.

I.C.E.'s obligation will be to ship free of charge, replacement parts by

U.P.S. Ground, U.S. mail, or other comparable shipping means. Any

express mail or overnight shipping expense is at the cost of the purchaser.

·Products will be covered under warranty only when:

·The serial number of the game with the defective parts is given.

·The serial number of the defective part, if applicable, is given.

·Defective parts are returned to I.C.E., shipping pre-paid, in a timely

fashion, if requested by I.C.E.

·A copy of the sales receipt is available as proof of purchase upon

request of I.C.E.

I.C.E. distributors are independent, privately owned and operated. In their

judgment, they may sell parts or accessories other than those

manufactured by I.C.E. We cannot be responsible for the quality,

suitability, or safety of any non-I.C.E. part, or any modification, including

labor, which is performed by such a distributor.

Andere Innovative Concepts in Entertainment Arcade-Spielautomat Handbücher