Innovative Concepts in Entertainment Wacky Ducks Bedienungsanleitung

OWNERS AND SERVICE MANUAL

MANUFACTURED UNDER LICENSE FROM JUPITER GAMES

10123 MAIN STREET, CLARENCE, NY 14031

SERVICE 1-716-759-0360 FAX 1-716-759-0084 E-MAIL service@icegame.com

TABLE OF CONTENTS

INTRODUCTION

·GAME FEATURES

·GAME PLAY

ASSEMBLY

·BEFORE YOU BEGIN

·TOOLS NEEDED

·INSTALLATION

·SETTING A.C. LINE VOLTAGES

·A.C. LINE VOLTAGE ADJUSTMENTS

SET-UP / TESTING

·SAFETY PRECAUTIONS

·PROGRAMMING YOUR GAME

·OPTION MODES

·TESTING

QUICK TROUBLESHOOTING

·PROBLEMS AND SOLUTIONS

REPAIR

·OPERATIONAL BACKGROUND

·MECHANICAL REPAIR

·ELECTRICAL / ELECTRONIC REPAIR

·MAINTENANCE

PARTS LISTINGS

SCHEMATICS

WARRANTY INFORMATION

INTRODUCTION

GAME FEATURES

Thank you for your purchase of the new WACKY

DUCKSÔredemption game from I.C.E.

Through an exclusive agreement with JUPITER

GAMES, I.C.E. is able to bring you an innovative

product with all of the features and reliability

you've come to expect in our games.

The game is constructed of a quality 7 ply MDO

plywood cabinet. The cabinet is then sealed,

painted and decaled using laminated graphics

that resist most common cleaning agents. All

metal parts are powder coated for maximum

beauty and durability.

The game uses creative lighting techniques to

draw game players to it and to enhance game

enjoyment. Long lasting rope light is used for the

marquee that is mounted behind a multi-color

graphics panel to create an attractive rainbow

pattern. Flashing ducks and super bright sign

grade florescent lighting round out the lighting

package.

A unique cartoon like Punching Glove on a

scissors mechanism gives the game a fun way

for Kids to play the game. The mechanism has

been extensively tested for durability and

reliability. The solenoid coil that drives the

mechanism is fan cooled and thermally

protected. The coil is also operated on low

voltage D.C. power.

The game electronics are at the same time high

tech, yet all drive components are chosen for

their long history of reliability. Surface mount

components and programmable logic arrays keep

the board size to a minimum and the reliability to

the maximum.

A high quality digital audio amplifier is used to re-

create some of the funniest sounds you'll ever

hear in a game. A variety of funny duck sounds

will keep you laughing for hours on end.

The ducks move along a belt that is powered by

a heavy-duty 12-volt gear motor. This motor has

been chosen for its long lasting and cool running

capabilities. It has a full-length drive shaft for

greater reliability.

All electronics are fully operator adjustable and

are adjusted via convenient programming buttons

located just inside the coin door. The game

allows the operator to choose a timed game or a

random hit game depending on the operators'

location. (Please see the Game Play section

below and the programming section for further

information).

GAME PLAY

The game can be set up to be played in two

different ways. Both ways are described below.

TIMED GAME

The player inserts their money into the game to

begin. Behind the row of ducks are Frog displays

that have a "time" indicator on them. Once the

player tries to hit his first duck, the count down

timer will begin. (The timer will also begin if the

player does nothing for ten seconds or more).

Once the timer begins, the player needs to hit as

many ducks as possible before time runs out.

The player will be awarded tickets based on how

many ducks have been knocked down. The

player may also receive "mercy" tickets if they

were unable to hit any ducks.

ONE HIT GAME

In this version of the game, the player inserts his

money to start the game. Then the Frog display

will show a random number of "Tickets" that can

be won. This number will constantly continue to

change during game play. The player can hit the

punch button multiple times, however the game

INTRODUCTION

ends once the player hits a duck. The player then

wins the tickets that were displayed at the time of

the hit.

NOTE: This game is generally set up as a "One

Hit" game. The operator can however set the

game up for a different predetermined number of

hits.

ASSEMBLY

BEFORE YOU BEGIN

WARNING: WHEN INSTALLING THIS GAME, A

3 PRONG GROUNDED A.C. RECEPTICLE

MUST BE USED. FAILURE TO DO SO COULD

RESULT IN INJURY TO YOURSELF OR

OTHERS. FAILURE TO USE A GROUNDED

RECEPTICLE COULD ALSO CAUSE

IMPROPER GAME OPERATION, OR DAMAGE

TO THE ELECTRONICS

DO NOT DEFEAT OR REMOVE THE

GROUNDING PRONG ON THE POWER CORD

FOR THE SAME REASON AS GIVEN ABOVE.

USING AN IMPROPERLY GROUNDED GAME

COULD VOID YOUR WARRANTY.

HAVE A QUALIFIED ELECTRICIAN CHECK

YOU’RE A.C. RECEPTICLE TO BE SURE THE

GROUND IS FUNCTIONING PROPERLY.

TOOLS NEEDED

To assemble your game you will need a 7/16"

socket or box wrench.

Note: For normal game servicing you will need

two different size Allen wrenches which are

provided.

INSTALLATION

1. Remove the cardboard box from the pallet.

2. Cut banding that holds the game to the pallet.

NOTE: BE SURE TO STAND TO THE

SIDE WHEN CUTTING THE BANDS, AS

THEY ARE UNDER PRESSURE, AND

COULD SPRING OUT CAUSING

INJURY.

3. Remove all of the shrink-wrap and packaging

from the game and marquee.

4. Find the location that the game will be placed

in and move into rough position.

5. Remove the "Wacky DucksÔ" sign on the front

of the game by rotating the two locks, and

lifting up on them.

6. Remove the 7/16" bolts and fender washers

from the rear of the game. There are five of

these.

INSERT WIRES HERE

7. Get someone to help and move the

Duck / rainbow marquee into position. Insert

the rope light and speaker wires through the

hole in the back of the game. Tighten the bolts

to the marquee.

8. Inside the game, connect the rope light and

speaker wires.

LOCKS

MOUNTING

BOLTS

ASSEMBLY

SETTING A.C. LINE

VOLTAGES

The game comes with 4 available line voltage

settings as described below. These settings

should be used to provide A.C. power in the

correct range to the game without over or under

powering it.

POWER RANGE VOLTAGE SETTING

90-110 V.A.C. 115

110-130 V.A.C. 125

200-220 V.A.C. 230

220-250 V.A.C. 250

The game uses a POWER MODULE to handle

all of the A.C. power distribution chores of the

game. It incorporates an On-Off switch, primary

A.C. game fusing, and power switching

capabilities. This allows the game to be used with

a wide variety of A.C. voltages by re-strapping

the main transformer.

A.C. LINE VOLTAGE

ADJUSTMENT

To adjust the game for a different A.C. voltage:

·Unplug the game from the outlet.

·Disconnect the power cord from the

power module.

·Using a small flat blade screwdriver, pry

the fuse holder from the power module.

·Notice a small window on the fuse holder

with an arrow that points to the voltage

the game is presently set at.

·Using a small flat blade screwdriver, lift

the retaining tab that holds the voltage

selector in the fuse holder.

·Rotate the voltage selector until the

voltage you want is displayed in the

voltage select window.

·Push the voltage selector back into the

fuse holder until it snaps into place.

NOTE: Do not force the selector into the

fuse holder. If it does not go in easily, it is

not being installed correctly.

·Snap the fuse holder assembly back into

the power module.

·Plug the power cord back into the

receptacle in the power module, and into

the wall outlet.

NOTE: WHEN CHANGING VOLTAGES FROM

THE 115-125 TO 230-250 RANGE, LOWER THE

MAIN FUSE AMERAGE VALUE BY ½.

WHEN CHANGING FROM THE 230-250 TO

115-125 VOLT RANGE, DOUBLE THE MAIN

FUSE AMPERAGE VALUE.

Plug the game in, turn the power on

and play a couple of game. Pay

attention to the sound volume of the

game.

ADJUSTING VOLUME

There are two volume control potentiometers on

the Main P.C. Board. The top one controls the

theme music and the bottom one controls the

sound effects such as Duck sounds, etc. Adjust

these during game play.

FINAL ASSEMBLY

After the volume is adjusted, proceed to the set

up / testing section to prepare the game for your

location. When all testing is done, re-install the

"Wacky DucksÔ" Sign, remove the keys, and roll

the game into its final location. Lower the

adjustable leg levelers to keep the game from

moving.

YOUR GAME IS NOW READY TO

PLAY. IF YOU HAVE ANY FURTHER

QUESTIONS OR COMMENTS

REGARDING THE GAME, PLEASE

CALL OUR SERVICE DEPARTMENT

AT 1-716-859-0360

SET-UP / TESTING

SAFETY PRECAUTIONS

WARNING: WHEN INSTALLING THIS GAME, A

3 PRONG GROUNDED A.C. RECEPTICLE

MUST BE USED. FAILURE TO DO SO COULD

RESULT IN INJURY TO YOURSELF OR

OTHERS. FAILURE TO USE A GROUNDED

RECEPTICLE COULD ALSO CAUSE

IMPROPER GAME OPERATION, OR DAMAGE

TO THE ELECTRONICS

DO NOT DEFEAT OR REMOVE THE

GROUNDING PRONG ON THE POWER CORD

FOR THE SAME REASON AS GIVEN ABOVE.

USING AN IMPROPERLY GROUNDED GAME

COULD VOID YOUR WARRANTY.

HAVE A QUALIFIED ELECTRICIAN CHECK

YOU’RE A.C. RECEPTICLE TO BE SURE THE

GROUND IS FUNCTIONING PROPERLY.

REPLACE ALL INCANDESCENT BULBS WITH

PROPER ICE SUPPLIED BULBS ONLY

PROGRAMMING YOUR

GAME

This section will give you a detailed explanation

of the functions and operating characteristics of

each of the programming buttons.

PLEASE READ THIS SECTION CAREFULLY

TO AVOID PROBLEMS WITH YOUR GAME.

PLEASE NOTE: THE PROGRAMMING AND

TICKET RESET BUTTONS ARE LOCATED

INSIDE THE LEFT HAND COIN DOOR.

ADDITIONALLY, THERE IS A SINGLE TICKET

RESET BUTTON INSIDE THE RIGHT HAND

COIN DOOR.

DISPLAY INFORMATION

THE RIGHT HAND FROG DISPLAY WILL

SHOW YOU THE OPTION YOU ARE IN. THE

LEFT HAND DISPLAY WILL SHOW THE

VALUE OR SETTING FOR THAT OPTION.

PROGRAMMING BUTTON

Press this button to enter or exit the

PROGRAMMING mode. You will notice when

you are in the Programming mode, as the

displays in the Frogs will change.

SELECT BUTTON

This button is used to change from one option to

the next. When this button is pushed, the option

number is shown in the display window of the

RIGHT HAND Frog.

ADVANCE

This button is used to change the value within the

option. When this button is pushed, the value will

be shown in the LEFT HAND Frog.

TICKET RESET BUTTON

When the game runs out of tickets, it keeps track

of how many are owed. When more tickets are

inserted, the game will attempt to dispense all of

the tickets that are still owed. If the operator does

not wish to dispense these tickets when

reloading, press the "Ticket Reset" button

BEFORE replacing the tickets. The tickets Reset

buttons are located inside the coin doors.

OPTION MODES

MODE 0

(COINS PER CREDIT)

This option determines how many coins are

necessary to start a game. The range for this

game is 1-10. The default value for this mode is

"1"

SET-UP / TESTING

MODE 1

(GAME LENGTH)

This mode determines how long the game lasts

in SECONDS. The range for this value is 0-30.

The default value for this game is "10"

SETTING A "0" FOR THIS MODE WILL PUT

THE GAME INTO THE "RANDOM TICKET"

MODE.

MODE 2

(COIN OR CREDIT COUNTER)

This mode determines if the coin counter will

count coins or credits. (Example: If it takes 3

coins to start a game, then 3 coins would equal 1

credit). Setting a "0" equals coins. Setting a "1"

equals credits. The default value for this option is

"0".

MODE 3

(TIME BETWEEN HITS)

This mode determines how long the game will

make the player wait between hits of the

punching glove. The number shown X 100

milliseconds equals the actual time. (Example: 10

X 100 milliseconds equal 1 second). The range

for this option is 10-50 (1 to 5 seconds). The

default value for this option is "10"

MODE 4

(DUCKS PER XX TICKET

DISPENSE)

This option determines how many ducks must be

knocked down each time XX tickets can be

dispensed. (See OPTION 6 for value of XX) The

range for this option is 1-9. The default value for

this option is "1".

FOR EXAMPLE, if the value set in OPTION 4 is

"2" and the value set in OPTION 5 is "3", the

game would dispense 3 tickets for every 2 ducks

knocked down.

MODE 5

(VALUE OF XX)

This option determines the number of tickets to

dispense each time a dispense order is given by

OPTION MODE 4. The range for this option is 1-

9. The default value for this option is "1".

MODE 6

(JUST FOR PLAYING TICKETS)

This mode determines the amount of "Mercy"

tickets paid to the customer ion the event that

they do not win any tickets during normal game

play. The range for this option is 0-99. The

default value for this option is "3"

NOTE: THIS OPTION FUNCTIONS IN THE

TIMED GAME MODE ONLY.

MODE 7

(ATTRACT TIME)

This mode determines the period of time between

attract modes. The numbers in this option

represent minutes. The range for this option is 0-

90. Setting a "0" equals turning the attract mode

OFF. The default value for this option is "3

MODE 8

(ATTRACT MODE TYPE)

This option determines which type of attract

mode is set.

0= Mode Disabled

1= Audio only

2= Motion only

3= both motion and audio

The default value for this option is "3"

SET-UP / TESTING

MODE 9

(FACTORY RESET)

This mode has the capability to reset all options

to the factory default values. The range for this

option is 0-1. Setting a "1" will reset all values.

The default value for this option is "0" (no reset)

NOTE: THE GAME CAN ALSO BE RESET TO

FACTORY DEFAULT VALUES BY TURNING

THE GAME OFF, REMOVING THE BATTERY

FROM THE MAIN P.C. BOARD. , WAIT A FEW

MINUTES THEN TURN THE GAME BACK ON.

THE ABOVE PROCEEDURE IS ALSO

VALUABLE IF FOR SOME REASON THE GAME

ELECTRONICS WERE TO LOCK OR FREEZE

UP.

GAME TESTING

After you have completed the set-up of your

game, INSTALL TICKETS into the game, and

play a few games to make sure everything is

working properly. Check the following:

·Check the ticket dispenser to be sure the

proper amount of tickets is given.

·Check to be sure the duck belt is tracking

properly. If not, check the mechanical

repair section for adjustment procedures.

·Be sure all external fasteners like those

of the cover glass and puncher housings

are installed and tight.

SET-UP / TESTING

ROPE LIGHTING

The rope light in the marquee is operated by a

rope light controller located behind the WACKY

DUCKSÔsign.

Determine which type of controller is installed in

your game. (See photos)

If you have the type shown in the photo below,

use the following instructions:

Check to see that the rope light controller is set

as follows:

1. The "CHASE" mode switch should be set to

position #2.

2. The "SPEED" mode knob should be turned

fully clockwise, then rotated back about ¼

inch.

NOTE: THE "SOUND" MODE KNOB IS NOT

USED.

If you have the type shown in the photo below,

there are no adjustments. The fuse located at the

bottom of the printed board is the only user

serviceable item.

FUSE

IF YOU HAVE ANY QUESTIONS

REGARDING THE PROGRAMMING

OPTIONS, PLEASE CONTACT OUR

SERVICE DEPARTMENT

PHONE: 1-716-759-0360

FAX: 1-716-759-0884

E-MAIL: service@icegame.com

SOUND CONTROL

SPEED CONTROL

CHASE CONTROL

Andere Handbücher für Wacky Ducks

Inhaltsverzeichnis

Andere Innovative Concepts in Entertainment Arcade-Spielautomat Handbücher