Intel NUC Kit NUC5PGYH Bedienungsanleitung

Intel NUC Kit NUC5PGYH User Guide

Intel®

NUC Kit

NUC5PGYH

User

Guide

Intel NUC Kit NUC5PGYH User Guide

Before You Begin

CAUTIONS

The procedures in this user guide assume familiarity with the general terminology associated with

personal computers and with the safety practices and regulatory compliance required for using

and modifying electronic equipment.

Disconnect the computer from its power source and from any telecommunications link or network before

performing any of the procedures described in this guide. Failure to disconnect power,

telecommunications links, or networks before you open the computer or perform any procedures can

result in personal injury or equipment damage. Some circuitry on the board can continue to operate

even though the front panel power button is off.

Follow these guidelines before you begin:

Always follow the steps in each procedure in the correct order.

Set up a log to record information about your computer, such as model, serial numbers,

installed options, and configuration information.

Electrostatic discharge (ESD) can damage components. Perform the procedures described in

this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam

pad. If such a station is not available, you can provide some ESD protection by wearing an

antistatic wrist strap and attaching it to a metal part of the computer chassis.

Installation Precautions

When you install and test the Intel NUC, observe all warnings and cautions in the installation

instructions.

To avoid injury, be careful of:

Sharp pins on connectors

Sharp pins on circuit boards

Rough edges and sharp corners on the chassis

Hot components (such as SSDs, processors, voltage regulators, and heat sinks)

Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing to qualified

technical personnel.

Observe Safety and Regulatory Requirements

If you do not follow these instructions, you increase your safety risk and the possibility of

noncompliance with regional laws and regulations.

Intel NUC Kit NUC5PGYH User Guide

This guide tells you how to:

•

Install a 2.5” drive (optional)

•

Upgrade memory (optional)

•

Install a VESA mount bracket (optional)

•

Set up Microsoft® Windows® 10

•

Keep BIOS and drivers current

•

Operating system recovery

Install a 2.5” SSD or Hard Drive (Optional)

For a list of tested 2.5” hard drives, go to the Tested Peripherals page on the Support site.

Follow these instructions to install a 2.5” Solid State Drive (SSD) or Hard Disk Drive (HDD):

1. Observe the precautions in "Before You Begin" on page 2.

2. Open the Intel NUC chassis by unscrewing the four corner screws on the bottom cover of the chassis

and lift the cover.

Intel NUC Kit NUC5PGYH User Guide

3. Slide the 2.5” drive into the drive bay, ensuring the SATA connectors are fully seated into the

connectors of the SATA daughter card (A).

4. Secure the drive into the drive bay with the two small silver screws that were included in the box (B).

5. Set the drive bay bracket down inside the chassis (C), taking care not to pinch the SATA cables along

the edge.

Intel NUC Kit NUC5PGYH User Guide

Upgrade Memory

Intel NUC Kit NUC5PGYH has a 2GB DDR3L memory module already installed. You can upgrade to a

larger capacity module if you wish. Memory requirements:

1.35V low voltage memory

1066 MHz or 1600 MHz SO-DIMMs (1333 MHz modules will operate at 1066 MHz)

Non-ECC

Max memory –8GB

For a list of tested memory, go to the System Memory page on the Support site:

To upgrade memory:

1. Remove the pre-installed SO-DIMM, following these steps:

a. Observe the precautions in "Before You Begin" on page 2.

b. Gently spread the retaining clips at each end of the SO-DIMM socket. The SO-DIMM

pops out of the socket.

c. Hold the SO-DIMM by the edges, lift it away from the socket, and store it in an

anti-static package.

d. Reinstall and reconnect any parts you removed or disconnected to reach the SO-DIMM

sockets.

e. Replace the computer’s cover and reconnect the AC power cord.

2. Install the new SO-DIMM, following these steps:

a. Align the small notch at the bottom edge of the SO-DIMM with the key in the socket

(A).

b. Insert the bottom edge of the SO-DIMM into the socket.

c. When the SO-DIMM is inserted, push down on the outer edge of the SO-DIMM (B)

until the retaining clips snap into place. Make sure the clips are firmly in place (C).

Intel NUC Kit NUC5PGYH User Guide

Close the Chassis

After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by

hand with a screwdriver to avoid over-tightening and possibly damaging the screws.

Attach and Use the VESA Bracket (Optional)

Follow these instructions to attach and use the VESA mount bracket:

1. Using the four small black screws that were included in the box, attach the VESA bracket to the

back of the monitor or TV.

Intel NUC Kit NUC5PGYH User Guide

2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC.

3. Slide the Intel NUC onto the VESA mount bracket.

Set Up Microsoft® Windows® 10

Microsoft Windows 10 is already installed on the Intel NUC Kit NUC5PGYH. The first time you start the

computer, you are guided through the following Setup steps:

1. Select your region and language.

2. Accept the Microsoft Windows license terms.

3. Personalize Windows and assign a PC Name.

4. "Get Online" dialog to pick a wireless network (this step is optional).

5. Choose Express Settings or Customize.

6. Assign a User Name and Password.

7. Finished.

Intel NUC Kit NUC5PGYH User Guide

Keep BIOS and Drivers Current

To download the latest BIOS and drivers, go to Download Center.

Refer to BIOS Update Instructions for information on updating the BIOS for your Intel NUC.

Drivers are available for the following features:

Audio

Bluetooth

Chipset

Consumer Infrared

Graphics

Intel® TXE

Intel® Ready Mode Technology

LAN (wired and wireless)

NFC

Serial I/O

USB 3.0

Operating System Recovery

There is a Windows recovery partition on the Intel NUC. You can use this partition to Refresh, Reset, or

Restore Windows. Here is what each of these actions do:

Refresh

If your PC isn't performing as well as it once did, and you don't know why, you can

refresh your PC. This action does not delete any of your personal files or change

your settings. Refresh does the following:

Files and personalization settings won’t change.

PC settings are changed back to their defaults.

Apps from the Windows Store are kept.

Apps installed from disks or websites are removed.

List of removed apps is saved on the desktop.

Reset

If you want to recycle your PC, give it away, or start over with it, you can reset it

completely. This process removes everything. Reset does the following:

All personal files and apps are removed.

PC settings are changed back to their defaults.

Windows is reinstalled.

Restore

If a recently installed app or driver is causing problems with your PC, you can

restore Windows back to an earlier point in time, called a restore point. System

Restore doesn’t change your personal files, but it can remove recently installed

apps and drivers.

Caution - Before performing a reset or refresh:

Make sure to back up all personal data to external storage.

Remove SD card from the card slot, if one is inserted.

Intel NUC Kit NUC5PGYH User Guide

To access the recovery media:

If Windows starts

From Windows Start, type Recovery and select Recovery Options.

See Recovery options in Windows 10 for complete details on how

to use the recovery options.

If Windows does not start

The recovery process should automatically start. If Recovery does

not automatically start, you can try to initiate it as follows:

1. Press F8 during boot, when you see the prompt “F8 to

Activate Windows 8.1/10 Recovery Mode”.

2. Follow the recovery steps.

Andere Handbücher für NUC Kit NUC5PGYH

Inhaltsverzeichnis

Andere Intel Desktop Handbücher

Intel

Intel NUC6CAYH Bedienungsanleitung

Intel

Intel BOXNUC8i7BEKQA Bedienungsanleitung

Intel

Intel Compute Card Dock Bedienungsanleitung

Intel

Intel Euclid Bedienungsanleitung

Intel

Intel NUC Kit DE3815TYKHE Bedienungsanleitung

Intel

Intel NUC 12 Pro Kit NUC12WSHi3 Bedienungsanleitung

Intel

Intel System 310 Betriebsanleitung

Intel

Intel NUC 13 Pro Mini PC NUC13ANKi7 Bedienungsanleitung

Intel

Intel NUC 8 Enthusiast Bedienungsanleitung

Intel

Intel SR2520SAXSR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel NUC8i7BEK Bedienungsanleitung

Intel

Intel NUC 13 Pro NUC13ANHi7 Bedienungsanleitung

Intel

Intel SR1530AH - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel CareFusion DMS-SA1300-A1E Bedienungsanleitung

Intel

Intel STCK1A32WFC Bedienungsanleitung

Intel

Intel EES-5716 Bedienungsanleitung

Intel

Intel NUC8i7HN Konfigurationshandbuch

Intel

Intel NUC11BT Bedienungsanleitung

Intel

Intel NUC8i5BEH Bedienungsanleitung

Intel

Intel S5520SC Einrichtungshandbuch

Intel

Intel Classmate PC Bedienungsanleitung

Intel

Intel NUC 7 ENTHUSIAST Bedienungsanleitung

Intel

Intel NUC Series Bedienungsanleitung

Intel

Intel NUC11PAQi70QA Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung