Interacoustics Sera Bedienungsanleitung

D-0118113-C –2019/03 Page 1of 2

Quick Guide

SeraTM Automated ABR

PREPARE THE EQUIPMENT

1. Turn on SeraTM by pressing the home/power button

2. Select a new or existing patient on the device or use the Quick Test option.

3. Select the ABR test protocol from the list.

4. Select the ear for testing

5. Pressing the Test button starts the test.

TEST ENVIRONMENT

The ideal test environment is a quiet room where lights and other electronic equipment are turned off.

PREPARE THE BABY

Patient state

The baby should be sleeping or in a quiet and relaxed state.

Sucking, blinking, crying or movement may affect testing.

Skin preparation

If the baby’s skin is oily or covered in vernix, the electrode placement sites

should be cleaned prior to placing the electrodes.

Use a conductive gel with the electrodes to improve impedances.

Place electrodes

Place surface electrodes using the specified test montage for the selected

protocol (mastoid or nape).

Connect cables

Connect the cables from the preamplifier to the respective surface electrodes.

PLACE TRANSDUCER

Place the probe or insert earphones in the baby’s ear/s or place the EarCups around the baby’s ears.

To reduce the chance of

electrical interference, ensure

that the electrode cables are

placed away from the insert

earphone or EarCup transducer

box.

D-0118113-C –2019/03 Page 2of 2

RUN TEST

Press the Test button

IMPEDANCE CHECK

RESULTS

PASS result

REFER result

INCOMPLETE result

When the pass criteria for the test

is reached, a is displayed in

green above the measurement,

indicating the test has PASSED.

When the pass criteria for the test

is not reached within the

measurement time, is displayed

in amber above the measurement,

indicating the test is a REFER.

If the test is stopped before a

PASS or REFER is generated by

the system, is displayed above

the measurement indicating that

the test is INCOMPLETE.

An impedance check will begin. Impedances are indicated by the green/amber dots on the montage picture

as well as in numerical format on the screen.

When a dot is amber, it means the impedance is poor (> 50kΩ) for the

indicated electrode. Check that the surface electrode and cables are

connected correctly. It may be necessary to re-clean the skin or use a

conductive gel with the surface electrodes to achieve an acceptable

impedance. Testing cannot begin until impedance indictors are green

(< 50kΩ).

Andere Handbücher für Sera

Andere Interacoustics Medizinische Geräte Handbücher

Interacoustics

Interacoustics Aqua Stim Bedienungsanleitung

Interacoustics

Interacoustics OtoRead Bedienungsanleitung

Interacoustics

Interacoustics Air Fx Bedienungsanleitung

Interacoustics

Interacoustics AD528 Bedienungsanleitung

Interacoustics

Interacoustics EyeSeeCam vHIT Bedienungsanleitung

Interacoustics

Interacoustics OtoRead Bedienungsanleitung

Interacoustics

Interacoustics Orion Bedienungsanleitung

Interacoustics

Interacoustics Air Fx Bedienungsanleitung

Interacoustics

Interacoustics Aqua Stim Bedienungsanleitung

Interacoustics

Interacoustics Virtual SVV Bedienungsanleitung

Interacoustics

Interacoustics AT235 Bedienungsanleitung

Interacoustics

Interacoustics VRA Screen Bedienungsanleitung

Interacoustics

Interacoustics Titan ABRIS Bedienungsanleitung

Interacoustics

Interacoustics Nydiag 200 Bedienungsanleitung

Interacoustics

Interacoustics Lyra Bedienungsanleitung

Interacoustics

Interacoustics Affinity2.0 Bedienungsanleitung

Interacoustics

Interacoustics affinity 2.0 Bedienungsanleitung

Interacoustics

Interacoustics VisualEyes 515 Bedienungsanleitung

Interacoustics

Interacoustics Micromedical Orion Bedienungsanleitung

Interacoustics

Interacoustics AS608 Bedienungsanleitung

Interacoustics

Interacoustics VRA201 Bedienungsanleitung

Interacoustics

Interacoustics ASSR Bedienungsanleitung

Interacoustics

Interacoustics Titan Bedienungsanleitung

Interacoustics

Interacoustics Eclipse Installationshandbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung