Interlogix NS2052-8P-2C Bedienungsanleitung

NS2052-8P-2C Industrial

PoE+ Switch User Manual

P/N 1073392-EN • REV A • ISS 07FEB18

2018 United Technologies Corporation.

Interlogix is part of UTC

Climate, Controls & Security, a unit of United

Technologies Corporation

Trademarks and

patents

Trade names used in this document may be trademarks or registered

trademarks of the

manufacturers or vendors of the respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Version

This document applies to

NS2052-8P-2C.

FCC compliance

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference,

and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC compliance

Class A:

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated i

n a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this

equipment

in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Canada

This Class A digital apparatus complies with CAN ICES

-003 (A)/NMB-

3 (A).

Cet appareil numérique

de la classe A est conforme à la norme CAN ICES-

003 (A)/NMB

-3 (A).

ACMA compliance

Notice!

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to

take adequate measures.

Certification

EU directives

This product and

- if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19

/EU (WEEE directive): Products marked with this symbol cannot

be disposed of as unsorted municipal waste in the European Union. For

proper recycling, return this product to your local supplier upon the

purchase of equivalent new equi

pment, or dispose of it at designated

collection points. For more information see: www.recyclethis.info.

Product warnings and

disclaimers

THESE PRODUCTS ARE INTENDED FOR SALE TO AND

INSTALLATION BY QUALIFIED PROFESSIONALS. UTC FIRE &

SECURITY CANNOT PROVIDE ANY ASSURANCE THAT ANY PERSON

OR ENTITY BUYING ITS PRODUCTS, INCL

UDING ANY “AUTHORIZED

DEALER” OR “AUTHORIZED RESELLER”, IS PROPERLY TRAINED OR

EXPERIENCED TO CORRECTLY INSTALL FIRE AND SECURITY

RELATED PRODUCTS

For more information on warranty disclaimers and prod

uct safety

information, please check

www.firesecurityproducts.com/policy/product-

warning/

or scan the following code:

Contact information

and manuals

For contact information go to:

www.interlogix.com or

www.firesecurityproducts.com

To get translations for this and other product manuals go to:

www.firesecurityproducts.com

Content

Important information 2

Chapter 1 Package contents 3

Package contents 3

Chapter 2 Hardware introduction 4

Physical dimensions 4

Product features 9

Product specifications 10

Chapter 3 Installation 13

DIN-rail mounting 13

Wall mount plate mounting 15

Installing the SFP transceiver 15

Chapter 4 Troubleshooting 18

Appendix A Networking connection 19

Appendix B Approved Interlogix SFP transceivers 22

NS2052-8P-2C Industrial PoE+ Switch User Manual 1

Important information

Limitation of liability

To the maximum extent permitted by applicable law, in no event will UTCFS be liable

for any lost profits or business opportunities, loss of use, business interruption, loss of

data, or any other indirect, special, incidental, or consequential damages under any

theory of liability, whether based in contract, tort, negligence, product liability, or

otherwise. Because some jurisdictions do not allow the exclusion or limitation of liability

for consequential or incidental damages the preceding limitation may not apply to you.

In any event the total liability of UTCFS shall not exceed the purchase price of the

product. The foregoing limitation will apply to the maximum extent permitted by

applicable law, regardless of whether UTCFS has been advised of the possibility of

such damages and regardless of whether any remedy fails of its essential purpose.

Installation in accordance with this manual, applicable codes, and the instructions of the

authority having jurisdiction is mandatory.

While every precaution has been taken during the preparation of this manual to ensure

the accuracy of its contents, UTCFS assumes no responsibility for errors or omissions.

Advisory messages

Advisory messages alert you to conditions or practices that can cause unwanted

results. The advisory messages used in this document are shown and described below.

WARNING: Warning messages advise you of hazards that could result in injury or loss

of life. They tell you which actions to take or to avoid in order to prevent the injury or

loss of life.

Caution: Caution messages advise you of possible equipment damage. They tell you

which actions to take or to avoid in order to prevent damage.

Note: Note messages advise you of the possible loss of time or effort. They describe

how to avoid the loss. Notes are also used to point out important information that you

should read.

2 NS2052-8P-2C Industrial PoE+ Switch User Manual

Chapter 1

Package contents

The description of the IFS NS2052-8P-2C model is as follows:

Industrial 8-port 10/100TX 802.3at PoE+

+ 2-port TP/SFP combo Ethernet switch

Unless specified, the term “industrial PoE+ switch” mentioned in this user manual refers

to the NS2052-8P-2C.

Package contents

Open the box of the industrial PoE+ switch and carefully unpack it. The box should

contain the following items:

The industrial PoE+ switch × 1

CD with user manual × 1

DIN rail kit x 1

Wall mounting kit x 1

If any of these are missing or damaged, contact your dealer immediately. If possible,

retain the carton including the original packing materials for repacking the product in

case there is a need to return it to us for repair.

3 NS2052-8P-2C Industrial PoE+ Switch User Manual

Chapter 2

Hardware introduction

Physical dimensions

Dimensions (W x D x H): 161 x 107 x 72 mm

4NS2052-8P-2C Industrial PoE+ Switch User Manual

Chapter 2: Hardware introduction

Front panel

Fast Ethernet TP interfaces (port 1 to port 8)

10/100BASE-TX copper, RJ45 twisted-pair: Up to 100 meters.

Gigabit TP interfaces (port 9 to port 10 TP/SFP combo interfaces)

10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meters.

Gigabit SFP slots (port 9 to port 10 TP/SFP combo interfaces)

1000BASE-SX/LX mini-GBIC slot, SFP (Small-form Factor Pluggable) transceiver

module: From 550 meters (multi-mode fiber) and to 10/20/30/40/50/70/120 kilometers

(single-mode fiber).

NS2052-8P-2C Industrial PoE+ Switch User Manual 5

Chapter 2: Hardware introduction

DIP switch

The industrial PoE+ switch has a built-in solid DIP switch that provides “Standard” and

“Extend” operation modes. The industrial PoE+ switch operates as a normal IEEE

802.af/at PoE+ Switch in the “Standard” operation mode.

In the “Extend” operation mode, the industrial PoE+ switch operates on a per-port basis

at 10 Mbps full duplex operation but can support 30 W PoE power output over a

distance of up to 250 meters, overcoming the 100 m limit on Ethernet UTP cable. With

this brand-new feature, the industrial PoE+ switch provides an additional solution for

802.3af/at PoE+ distance extension.

LED indicators

The front panel LEDs indicate port link status, data activity, and system power.

picture

System

LED

Color Function

1 Green Lit: indicates that the power input 1 has power.

2 Green Lit: indicates that the power input 2 has power.

ault Red Lit: indicates that either power 1 or power 2 has no power.

6NS2052-8P-2C Industrial PoE+ Switch User Manual

Inhaltsverzeichnis

Andere Interlogix Schalten Handbücher

Interlogix

Interlogix NS3562-8P-2S Bedienungsanleitung

Interlogix

Interlogix NS3702-24P-4S-V2 Bedienungsanleitung

Interlogix

Interlogix GE-DS Series Bedienungsanleitung

Interlogix

Interlogix NS3562-8P-2S Bedienungsanleitung

Interlogix

Interlogix IFS NS3550-24T/4S Bedienungsanleitung

Interlogix

Interlogix IFS NS3502-8P-2S Bedienungsanleitung

Interlogix

Interlogix NS4702-24P-4X Bedienungsanleitung

Interlogix

Interlogix NS4750-24S-4T-4X Bedienungsanleitung

Interlogix

Interlogix NS4750-24S-4T-4X Bedienungsanleitung

Interlogix

Interlogix IFS NS2052-4P-1T Bedienungsanleitung

Interlogix

Interlogix IFS NS2503-8P/2C Bedienungsanleitung

Interlogix

Interlogix NS3552-16P-2T-2S Bedienungsanleitung

Interlogix

Interlogix NS4702-24P-4S-4X Bedienungsanleitung

Interlogix

Interlogix NS3702-24P-4S Bedienungsanleitung

Interlogix

Interlogix NS3552-16P-2T-2S Bedienungsanleitung

Interlogix

Interlogix ES2402 Series Bedienungsanleitung

Interlogix

Interlogix NS3550-8T-2S Bedienungsanleitung

Interlogix

Interlogix IFS GE-DSH-73 Montageanleitung

Interlogix

Interlogix POC2502 Series Bedienungsanleitung

Interlogix

Interlogix IFS ANT-OMN-15DB-2G Bedienungsanleitung

Interlogix

Interlogix NS3553-4P-1T-2S-V2 Bedienungsanleitung

Interlogix

Interlogix NS3552-8P-2S-V2 Bedienungsanleitung

Interlogix

Interlogix IFS ANT-PNL-9DB-2G Bedienungsanleitung

Interlogix

Interlogix NS4702-24P-4S-4X Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung