Intermec EasyCoder 401 Bedienungsanleitung

EasyCoder 401

Fan Fold Kit

P/N 1-960391-02

Edition 3

September 1998

Installation Instructions

EasyCoder 401 – Installation Instructions

EasyCoder 401

Fan Fold Kit

Installation Instructions

Edition 3, September 1998

Part No. 1-960391-02

Description

FAN FOLD KIT

Inadditiontotheinternalpaperroll,theEasyCoder401printerscan

also use thermal paper or receiving face material from an external

supply, e.g. an external paper roll or a stack of fan-folded tickets.

The paper is inserted into the printer through either the upper or

lower slot in rear plate.

Itisimportantthatthepaperwebisproperlyalignedinparallelwith

theprinter'scentre-linewall.Therefore,Intermecoffersanoptional

“Fan Fold Kit” consisting of:

• 1 Fan Fold Guide

• 1 Inner Guide

• 1 Outer Guide

• 2 Screws MRT 4 ×6 FZB

The kit also contains two guide shafts, each consisting of:

• 1 Break Shaft

• 2 Guide Rolls

• 1 Screw MRT 4

8 FZB

Theseguideshaftsareincludedforuseinotherprintermodelsthan

EasyCoder 401 and can be discarded.

Continued!

EasyCoder 401 – Installation Instructions

FAN FOLD KIT, cont'd.

Description, cont'd.

IMPORTANTPRINTHEADANDRIBBONINFORMATION

The use of any thermal transfer ribbons, other than those supplied by UBI, will invalidate

the printhead warranty. UBI thermal transfer ribbons are engineered specifically for this printhead.

The quality of thermal and thermal transfer media supplies in this printer is also of great importance

for the quality of printing bar codes and a long life of the printhead. UBI has carefully matched the

paper werecommend/provide to the needs of this printer. We therefore strongly advise of using

only UBI recommended/provided supplies to ensure a high quality printing.

TEAR-OFF

401

Fan Fold Guide assy.

Theguide bracketwith itstwo guidesis assembledbefore delivery

and can be fitted in the upper slot in the rear plate by means of two

screws. The outer guide is adjustable for different paper widths.

Note:

The lower slot in the rear plate can only be fitted with a fan fold

guideafterthecrescent-shapedguideplateinsidethepapersupply

roll has been removed.

EasyCoder 401 – Installation Instructions

The guide bracket with the two guides can be fitted either at the

upper slot in the rear plate.

Insertthecompleteunitthroughtheslotfromtheoutsideandattach

it to the rear plate by means of the two #T20 Torx screws included

in the kit.

Adjust the position of the outer guide to fit the width of the paper.

Installation –

Fan Fold Guides

FAN FOLD KIT, cont'd.

Continued!

EasyCoder 401 – Installation Instructions

Load the paper web according to the illustration below. Note that

the external supply should be protected from dust, sand, git and

otherparticlesthatmaydamagetheprintheadorimpairtheprintout

quality.

Paper Load Instructions

FAN FOLD KIT, cont'd.

Information in this manual is subject to change without prior notice and does

not represent a commitment on the part of Intermec Printer AB.

©CopyrightIntermecPTCAB,1998.Allrightsreserved.PublishedinSweden.

EasyCoder is a registered trademark of Intermec Technologies Corp.

Torx is a registered trademark of Camcar Division of Textron Inc.

Andere Handbücher für EasyCoder 401

Andere Intermec Etikettendrucker Handbücher

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec EasyCoder 4420 Bedienungsanleitung

Intermec

Intermec EasyCoder PX4i Bedienungsanleitung

Intermec

Intermec PM43 Bedienungsanleitung

Intermec

Intermec EasyCoder PX6i Bedienungsanleitung

Intermec

Intermec 3600 Bedienungsanleitung

Intermec

Intermec EasyCoder E4 Linerless Bedienungsanleitung

Intermec

Intermec 3240 Bedienungsanleitung

Intermec

Intermec PC43d Bedienungsanleitung

Intermec

Intermec EasyCoder PD4 Bedienungsanleitung

Intermec

Intermec EasyCoder 501XP Original Betriebsanleitung

Intermec

Intermec EasyCoder PX6i Bedienungsanleitung

Intermec

Intermec 4630 Bedienungsanleitung

Intermec

Intermec EasyCoder E4 Bedienungsanleitung

Intermec

Intermec EasyCoder 401 Bedienungsanleitung

Intermec

Intermec 4400 Bedienungsanleitung

Intermec

Intermec PB22 Bedienungsanleitung

Intermec

Intermec EasyCoder PD41 Bedienungsanleitung

Intermec

Intermec EasyCoder 501XP Original Betriebsanleitung

Intermec

Intermec 3240 Bedienungsanleitung

Intermec

Intermec PB22 Bedienungsanleitung

Intermec

Intermec EasyCoder PF4i Bedienungsanleitung

Intermec

Intermec PM43c Bedienungsanleitung

Intermec

Intermec EasyCoder E4 Bedienungsanleitung

Beliebte Etikettendrucker Handbücher anderer Marken

Brother

Brother P-Touch 2420PC Bedienungsanleitung

newell

newell Dymo LabelManager 210D Bedienungsanleitung

Brother

Brother TD-4000 Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Brother

Brother E300 Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6057 Service-Handbuch

Brother

Brother P-touch PT-9700PC Bedienungsanleitung

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung