Intermec 5020 Handbuch

Part No. 072506-001

Using TE 2000 On Your 5020 Data Collection PC

™

These instructions explain how to install and start the TE 2000 terminal emulation

software on your 5020. For help with installing a compact flash card or a main battery

pack, or to learn about booting the 5020, see the 5020 Data Collection PC User’s

Manual (Part No. 068975).

Note: If you have any user files on your 5020, back up all your files to a desktop PC,

network drive, or non-volatile memory card. All files in RAM will be lost during the

TE 2000 installation process.

To install TE 2000 software and choose a terminal emulation mode

1. Install the TE 2000 compact flash card from the TE 2000 Upgrade Kit (Part No.

072409) in the compact flash card slot on your 5020.

If you purchased a 5020 with the TE 2000 option, the TE 2000 compact flash card

has already been installed. Continue with Step 2.

2. Install a charged main battery pack in the 5020 and close the battery compartment

door.

• If this is not the first time you have installed a charged main battery pack,

continue with Step 3.

• If this is the first time you have installed a charged main battery pack, the 5020

initializes and a message box appears. Continue with Step 4.

3. Cold boot the 5020. After the cold boot is complete, a message box appears.

4. Press

. The 5020 will warm boot and auto-load the TE 2000 application. When

the warm boot is complete, TE 2000 will start automatically. After TE 2000

initializes, the main screen appears.

TE 2000 uses IBM 3270 terminal emulation as the default. You are ready to use TE

2000 in 3270 TE mode.

To choose 5250 or VT/ANSI TE mode, continue with the next step.

5. If one of the modifier keys (





, or



) is locked, press it down for two

seconds to unlock it. The key icon should disappear from the Notification Tray.

6. Press





. The Main Menu appears.

7. Press



. The Enter Password dialog box appears.

8. Enter CR52401. The Set-Up Parms menu appears.

9. Press



. The Protocol Opts menu appears.

Using TE 2000 On Your 5020 Data Collection PC

*072506-001*

6001 36th Avenue West

Everett, WA 98203-9280

10. Press



. The Data Stream menu appears.

11. Press



to choose 5250 TE or press



to choose VT/ANSI TE.

12. Press

three times to go back to the Main Menu and then press



. The Save

Parms message appears.

13. Enter Y to save the change. The Enter Password dialog box appears.

14. Enter CR52401. The TE 2000 main screen appears and the new TE choice appears

under Host.

You are ready to use TE 2000 in 5250 TE or VT/ANSI TE mode.

Note: After you install TE 2000 on your 5020, the scanner functions only when

TE 2000 is running and is unavailable for other applications or for scanning

configuration bar codes.

To exit the TE 2000 application

1. Press





. The Main Menu appears.

2. Press



. The Enter Password dialog box appears.

3. Enter CR52401. The Set-Up Parms menu appears.

4. Press



. The Cold Start message appears.

5. Enter Y. TE 2000 closes and the 5020 desktop appears.

To restart the TE 2000 application

1. Press

to turn on the 5020.

2. Press





. The Start menu appears.

3. Press

to select Programs and then press

. The Programs drop-down menu

appears.

4. Press

to choose TE 2000 and then press

. After TE 2000 initializes, the

main screen appears.

Note: TE 2000 will also auto-start whenever you warm boot the 5020.

For more information, see the appropriate TE 2000 manual:

•TE 2000 5250 Terminal Emulation Programmer's Guide (Part No. 977-055-004)

•TE 2000 3270 Terminal Emulation Programmer's Guide (Part No. 977-055-003)

•TE 2000 VT/ANSI Terminal Emulation Programmer's Guide

(Part No. 977-055-005)

Andere Handbücher für 5020

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intermec PDA Handbücher

Intermec

Intermec Trakker Antares 2475 Bedienungsanleitung

Intermec

Intermec 70 Bedienungsanleitung

Intermec

Intermec 6651 Bedienungsanleitung

Intermec

Intermec CN4e Bedienungsanleitung

Intermec

Intermec 5020 Benutzerhandbuch

Intermec

Intermec Janus 2010 Montage- und Bedienungsanleitung

Intermec

Intermec CN51 Bedienungsanleitung

Intermec

Intermec 760 Bedienungsanleitung

Intermec

Intermec Trakker Antares 2425 Handbuch

Intermec

Intermec Trakker Antares 2480 Bedienungsanleitung

Intermec

Intermec 6300 SERIES Bedienungsanleitung

Intermec

Intermec 6650 Bedienungsanleitung

Intermec

Intermec 6212 Bedienungsanleitung

Intermec

Intermec NORAND 6642 Bedienungsanleitung

Intermec

Intermec Trakker Antares 2430 Bedienungsanleitung

Intermec

Intermec CN51 Bedienungsanleitung

Intermec

Intermec Trakker Antares 2400 Bedienungsanleitung

Intermec

Intermec CK3R Bedienungsanleitung

Intermec

Intermec PEN*KEY 6400 Bedienungsanleitung

Intermec

Intermec JANUS JG2010 Bedienungsanleitung

Intermec

Intermec 5055 Gebrauchs- und Pflegehandbuch

Intermec

Intermec Trakker Antares 2420 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6400 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6200 Bedienungsanleitung

Beliebte PDA Handbücher anderer Marken

SPOT

SPOT SPOT Bedienungsanleitung

Palm

Palm handheld Bedienungsanleitung

Winmate

Winmate E500QK Bedienungsanleitung

Getac

Getac PS236 Bedienungsanleitung

Sharp

Sharp CE-1600P Bedienungsanleitung

HTC

HTC PHAR100 Bedienungsanleitung

Mindeo

Mindeo M40 Bedienungsanleitung

Acer

Acer n30 Bedienungsanleitung

ASCOM

ASCOM 9D24 EX Bedienungsanleitung

Unitech

Unitech PA520BTNF Bedienungsanleitung

HandHeld

HandHeld Nautiz X3 Bedienungsanleitung

Casio

Casio PALM Bedienungsanleitung

Sharp

Sharp TM-20 Kurzanleitung

Atid

Atid AT870 Bedienungsanleitung

AML

AML M7225 Bedienungsanleitung

Audiovox

Audiovox Maestro Technisches Handbuch

Casio

Casio PV-750 Plus Gebrauchsanweisung

Unitech

Unitech PT630 Bedienungsanleitung