Intermec EasyCoder PF2i Bedienungsanleitung

Installation

Instructions

CPU Board

for EasyCoder

PF2/4i, PX4/6i &

PM4i

2 CPU Board—Installation Instructions

Before starting to replace the CPU board, take precautions

against electrostatic discharges.

All EasyCoder PF2/4i, PX4/6i and PM4i printers

Replace the CPU board this way:

• Switch oﬀ the power.

• Remove the front/left-hand cover.

• Remove any optional interface boards.

• Disconnect all cables from the CPU board.

• Remove the four #T20 Torx screws and the hexagonal spacer that hold

the CPU board to the plate that covers the power supply unit.

• Lift out the CPU board and remove all SIMMs and any real time

clock.

• Fit the SIMMs and possibly the real-time clock on the new board and

install it in reverse order.

Note: Refer to the Service Manual of each respective printer for

illustrations and instructions.

CPU Board—Installation Instructions 3

EasyCoder PM4i and PX4/6i printers only

e same CPU-board can be used for a range of EasyCoder printers.

However, the ﬁrmware cannot detect in which type of printer the CPU

board is installed. All replacement CPU boards are preprogrammed for

the EasyCoder PF2/4i-series printers, which means that replacement

CPU boards must always be reconﬁgured after being installed in an Easy-

Coder PM4i or PX4/6i printer.

If the printer feeds out labels in a peculiar way, the CPU board may be

conﬁgured for the wrong type of printer (there is a diﬀerence in the dis-

tance between the dot line and the LSS position).

You can easily check if the CPU board is correctly conﬁgured by printing

the “Hardware Info” or “HW” test label in the Setup Mode or sending

the Fingerprint instruction PRINT VERSION$(1).

If the CPU board needs to be reconﬁgured, do the following:

• Switch oﬀ the power.

• Insert a conﬁguration card in the memory card slot. Conﬁguration

cards can be ordered from Intermec via your local service organiza-

tion. Alternatively, the conﬁguration ﬁle (TYPESET.PRG) can be

downloaded from the Intermec Global Sales & Service website and

transferred to a CompactFlash memory card which is then utilized in

the same manner.

• Switch on the power.

• Select the correct printer type from the menus shown in the display

window.

• Switch oﬀ the power.

• Remove the card.

• Switch on the power again and check.

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Avenue West

Everett, WA 98203

tel 425.348.2600

fax 425.355.9551

www.intermec.com

*1-960616-02*

CPU Board—Installation Instructions

*1-960616-02*

Andere Handbücher für EasyCoder PF2i

14

Dieses Handbuch passt für folgende Modelle

4

Inhaltsverzeichnis

Andere Intermec Druckerzubehör Handbücher

Intermec

Intermec EasyCoder PD41 Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec EasyCoder 3400e Bedienungsanleitung

Intermec

Intermec EasyCoder 501 E Bedienungsanleitung

Intermec

Intermec EasyCoder F4 Bedienungsanleitung

Intermec

Intermec PB42 Handbuch

Intermec

Intermec EasyCoder 4420 Bedienungsanleitung

Intermec

Intermec ESim v4.20 Bedienungsanleitung

Intermec

Intermec EasyCoder F4 Bedienungsanleitung

Intermec

Intermec 3240 Bedienungsanleitung

Intermec

Intermec UBI EasyCoder 601 E Leitfaden

Intermec

Intermec EasyCoder 4420 Handbuch

Intermec

Intermec EasyCoder 201II Bedienungsanleitung

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec EasyCoder 501 SA Bedienungsanleitung

Intermec

Intermec EasyCoder 501 SA Bedienungsanleitung

Intermec

Intermec EasyCoder PD41 Bedienungsanleitung

Intermec

Intermec 869 RFID Reader Betriebsanleitung

Intermec

Intermec PA30 Bedienungsanleitung

Intermec

Intermec EasyCoder 501XP Bedienungsanleitung

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec PW50 Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Beliebte Druckerzubehör Handbücher anderer Marken

Star Micronics

Star Micronics TSP800 Series Bedienungsanleitung

REA

REA JET HR pro 2K Bedienungsanleitung

HP

HP Laserjet,Color Laserjet 4si Bedienungsanleitung

oliser

oliser MS 45 Bedienungsanleitung

Roland

Roland DU2-64 Anleitungen und Rezepte

Xerox

Xerox EFI EXP6000 Bedienungsanleitung

Canon

Canon Finisher-T1 Bedienungsanleitung

Sharp

Sharp FO-1MK Bedienungsanleitung

Labelmate

Labelmate PM-300 Bedienungsanleitung

Epson

Epson T6248 Betriebsanleitung

Epson

Epson OT-BZ20 Bedienungsanleitung

Canon

Canon TonerRobot EP-27 Bedienungsanleitung

Ricoh

Ricoh LCIT RT5100 Kurzanleitung

GBC

GBC 16 Series Bedienungsanleitung

Canon

Canon INNER 2-WAY TRAY-E1 Bedienungs- und Wartungshandbuch

Develop

Develop SD-509 Bedienungsanleitung

Kyocera

Kyocera KM-6230 Handbuch

Triumph Adler

Triumph Adler DF-710 Handbuch