Intex Krystal Clear C1500 Bedienungsanleitung

Zusammengeführte PDF Datei. Die Originale sind im folgenden Verzeichnis verlinkt. / Merged PDF File. Original files are linked in the following list. / Sloučený soubor PDF.

Originály jsou propojeny v následujícím adresáři. / Egyesített PDF fájl. Az eredetiek a következő könyvtárban találhatók. / Zlúčený súbor PDF. Originály sú prepojené v

nasledujúcom adresári. / Združena datoteka PDF. Izvirniki so povezani v naslednjem imeniku. / Spojena PDF datoteka. Izvornici su povezani u sljedećem imeniku.

128636GS - Krystal Clear cartridge filter unit C1500

Cartridge Filter Unit 2

Hydro Aeration Technology 18

Air Valve For Water Revitalization Set 20

Setup Video 22

Service Center 24

108

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

English

OWNER’S MANUAL

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for

future reference.

Don’t forget to try these other fine Intex products: pools, pool

accessories, inflatable pools and in-home toys, airbeds and

boats available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex

reserves the right to change specifications and appearance,

which may result in updates to the instruction manual without

notice.

For illustrative purposes only.

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/

Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in

einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., Hong Kong &

Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans

l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V.,

Ettenseweg 46, 4706 PB Roosendaal – The Netherlands • Distributed in the UK by Unitex Service (UK) Limited,

21 Holborn Viaduct, London EC1A 2DY, UK.

www.intexcorp.com 108-*GS-R0-2305

Krystal Clear™ Filter Pump

Certified Model Number 636G

12 V~, 50 Hz, 15 A

Hmax 1.0 m, Hmin 0.19 m, IPX5

Max. Water Temperature 35 °C

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 2

Warnings.......................................................................... 3

Parts Reference............................................................... 4-5

Setup Instructions.......................................................... 6-9

Operating Instructions................................................... 10

Operating Time Table..................................................... 11

Pool Care and Chemicals............................................... 12

Maintenance.................................................................... 12-13

Long Term Storage......................................................... 13

Troubleshooting Guide.................................................. 14

Common Pool Problems................................................ 15

General Aquatic Safety.................................................. 15

Limited Warranty............................................................. 16

TABLE OF CONTENTS

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 3

WARNING

IMPORTANT SAFETY RULES

Read, understand and follow all instructions carefully before installing and using this product.

READ AND FOLLOW ALL INSTRUCTIONS

These product warnings, instructions and safety rules provided with the product represent some

common risks of water recreation devices and do not cover all instances of risk and danger. Please

use common sense and good judgement when enjoying any water activity.

• Always supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way and

understand the hazards involved.

• Assembly and disassembly by adults only.

• Risk of electric shock. Connect transformer only to a grounding type receptacle protected by a

ground-fault circuit interrupter (GFCI) or residual current device (RCD). Contact a qualified

electrician if you cannot verify that the receptacle is protected by a GFCI/RCD. Use a qualified

electrician to install the GFCI/RCD, which has a maximum rate of 30mA. Do not use a portable

residual current device (PRCD).

• Always unplug the transformer from the electrical outlet before removing, cleaning, servicing or

making any adjustment to the product.

• The plug must be accessible after produc t is installed.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers,

hedge trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or

converter plugs to connect unit to electric supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are

wet.

• Keep the transformer more than 3.5m away from the product.

• Keep the plug of the transformer more than 4.0m away from the product.

• Position this product away from the pool, so as to prevent children from climbing on it and

accessing the pool.

• Do not operate this product when the pool is occupied.

• This product is for use with storable pools only. Do not use with permanently installed pools. A

storable pool is constructed so that it may be readily disassembled for storage and reassembled

to its original configuration.

• The appliance is intended only for household use.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE,

ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 4

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

If the pump was purchased

individually, only these inlet fitting

parts are included. No tools are

required for the assembly.

NOTE: Drawings for illustration purpose only.

Actual product may vary

. Not to scale.

Type of filter medium:

Synthetic cartridge #29000

REF. NO.

DESCRIPTION QTY. SPARE PART NO.

1 THREADED FILTER HOUSING COLLAR 1 10749

AIR RELEASE VALVE/SEDIMENT RELEASE VALVE

2 10460

3 VALVE O-RING 2 10264

4 FILTER HOUSING COVER 1 10750

5 FILTER HOUSING O-RING 1 10325

6 FILTER CARTRIDGE 1 29000

7 PUMP HOSE WITH NUTS 2 11009

8 TRANSFORMER 1 10985

13 17 15

INLET

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 5

PARTS REFERENCE (continued)

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

NOTE: Drawings for illustration purpose only.

Actual product may vary

. Not to scale.

If the pump was purchased as part of a pool set, below fitting parts are included.

Contact our Authorized Service Centers to order these parts if needed.

When ordering parts, be sure to quote the model number and part numbers.

11 12 13 14 19

OUTLET

11 12

13 17 15

INLET

REF.

NO. DESCRIPTION QTY. SPARE

PART NO.

Individually

Pool Set

9PLUNGER VALVE (HOSE O-RING &

STEP WASHER INCLUDED) 0 2 10747

10 HOSE O-RING 2 4 10262

11 STEP WASHER 0 2 10745

12 STRAINER NUT 1 2 10256

13 FLAT STRAINER RUBBER WASHER 1 2 10255

14 THREADED STRAINER CONNECTOR 0 1 10744

15 ADJUSTABLE POOL INLET JET NOZZLE 1 1 12369

16 AIR JET VALVE 1 1 12363

17 INLET THREADED AIR CONNECTOR 1 1 12371

18 AIR JET VALVE CAP 1 1 12373

19 STRAINER GRID 0 1 12198

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 6

1. In a counter-clockwise motion unscrew

plunger valve union from the threaded

strainer connector (14) (see drawing 1).

Be careful not to lose the step rubber

washer (11). Place the plunger valve on

the ground in a safe place.

2. In a counter-clockwise motion unscrew

the strainer nut (12) from the threaded

connector (14). Leave the flat

washer (13) on the connector (14).

3. Install the strainer and plunger valve at the

lower position of pool outlet (marked "+").

From the inside of the pool liner insert

the connector (14) into one of the

pre-cut holes with the washer remaining

on the connector to be placed against

the inside of the liner wall.

4. Before assembly, lubricate the threads

with a petroleum jelly. Then, with the flat

side of the strainer nut (12) facing the

outside wall of the liner in a clockwise

motion screw the strainer nut (12) back

onto the threaded connector (14) (see

drawing 2).

5. Finger tighten the strainer nut (12) onto

the threaded connector (14).

6. Grasp the plunger valve assembly. Make

sure the step washer (11) is in place.

7. In a clockwise motion screw the plunger

valve union back onto the threaded

connector (14) (see drawing 3).

8. In a clockwise motion turn the plunger

valve handle to close position. Ensure the

plunger valve is securely closed. This will

prevent water from flowing out during

filling of the pool (see drawing 4).

POOL OUTLET -STRAINER & PLUNGER VALVE SETUP (optional)

The strainer grid prevents large objects from jamming and/or damaging the filter pump.

The plunger valve assembly prevents water from flowing into the filter pump while the

filter cartridge is being placed or cleaned. If your pool has an inflatable top ring, install the

strainer, nozzle and plunger valve before inflating the pool liner top ring. The parts

numbers here onward, refer to the parts depicted in the Parts List section of this manual.

To install, do the following:

INSIDE

LINER WALL

12 13 14

INSIDE

LINER WALL

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 7

POOL INLET -NOZZLE & PLUNGER VALVE SETUP (optional)

INSIDE

LINER WALL

WATER

FLOW

POOL

13 17 15

INSIDE LINER

WALL

NOTE: Do not cover the air jet

valve (16) with the valve cap (18)

under normal situation or when

the pump is operating. See

Troubleshooting Guide section

for more details.

1. In a counter-clockwise motion unscrew

plunger valve union from the inlet threaded air

connector (17) (see drawing 5) Be careful not

to lose the step rubber washer (11). Place the

plunger valve on the ground in a safe place.

2. In a counter-clockwise motion unscrew the

strainer nut (12) from the inlet threaded air

connector (17). Leave the flat washer (13) on

the connector (17).

3. Install the nozzle and plunger valve at the

upper position of pool inlet. From the inside of

the pool liner insert the nozzle union (15 & 17)

into one of the pre-cut holes with the washer

remaining on the connector to be placed

against the inside of the liner wall.

4. Before assembly, lubricate the threads with a

petroleum jelly. Then, with the flat side of the

strainer nut (12) facing the outside wall of the

liner in a clockwise motion screw the strainer

nut (12) back onto the inlet threaded air

connector (17) (see drawing 6).

5. Finger tighten the adjustable pool inlet jet

nozzle (15) and the strainer nut (12) onto the

inlet threaded air connector (17).

6. Grasp the plunger valve assembly. Make sure

the step washer (11) is in place.

7. Screw the air jet valve (16) over the inlet

threaded air connector (17). NOTE: Make sure

the air jet valve is securely tighten and facing

up. In a clockwise motion screw the plunger

valve union back onto the inlet threaded air

connector (17) (see drawing 7).

8. In a clockwise motion turn the plunger valve

handle to close position. Ensure the plunger

valve is securely closed. This will prevent water

from flowing out during filling of the pool (see

drawing 8).

9. Adjust the direction of the nozzle head

pointing away from the pool outlet for a better

circulation result (see drawing 9).

10. The pool liner is now ready to be filled with

water. Consult the above-ground-pool owner’s

manual for the filling instructions.

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 8

SETTING UP FILTER PUMP

Some countries, especially in the European community, require the filter pump to be secured to

the ground or to a base in a permanent upright position. Check your local authorities to determine

if there is a regulation in your area regarding above-the-ground swimming pool filter pumps. If yes,

then the filter pump can be mounted to a platform using the two holes located in the base. See

drawing below.

The filter pump can be mounted on a cement base or onto a wooden platform to prevent

accidental falling over. Total assembly must exceed 18kg.

1. The mounting holes are 6.4mm in diameter and spaced 130mm apart.

2. Use two bolts and lock nuts with a maximum of 6.4mm in diameter.

For your own personal safety, it is very important that you place your transformer more than 3.5m

away from your pump.

FILTER PUMP STATIONARY MOUNTING OPTION

130 mm

3.5 m

The power cord plug to the 220-240 volt electrical power source of the filter pump must be

positioned more than 3.5m away from the pool walls. Check your local authorities to determine the

appropriate standard and requirements for “electrical installation of swimming pools and basins

equipment”. The following table is for reference only:

International

France

Germany

The Netherlands

Country/Region Standard Number

IEC 60364-7-702

NF C 15-100-7-702

DIN VDE 0100-702

NEN 1010-702

(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2022

108

SAVE THESE INSTRUCTIONS

English

Page 9

FILTER PUMP HOSE CONNECTION SETUP

It is essential to change any damaged element or set of elements as soon as possible.

Use only parts approved by the manufacturer.

1. Remove the Krystal Clear™ filter pump and hoses from the packaging.

2. Place the filter pump in such a manner, that you can easily assemble the hose (7)

connections to the plunger valve. Ensure the filter pump is accessible at all time for service

and maintenance.

Note: Some regional regulations may require the filter pump to be mounted on a

stationary platform. There are two mounting holes located in the pump base for this

reason. Consult your local authorities for filter pump mounting requirements.

3. Grasp the two pump hoses (7) and connect the hose nuts to the filter pump.

4. In a counter-clockwise motion unscrew the threaded filter housing collar (1) from the filter

housing. Place it in a safe place.

5. The filter pump is an airtight system. Turn the top air release valve (2) once or twice in a

counter-clockwise motion. DO NOT remove the air release valve from the top cover, as

water will expel with force if the motor is turned on. This may cause injury.

6. Grasp and remove the filter housing cover (4). Check to see if a cartridge is inside the

housing. If yes, replace the cover, finger tighten the housing collar (1) back onto the filter

housing.

7. Gently finger tighten the sediment release valve located at the bottom of the housing to be

sure that water does not leak out.

8. When the pool is filled connect the hose from the bottom of the filter housing to the highest

strainer assembly. You will find the hose connection at the bottom of the plunger valve

assembly. Use the hose nut to attach the hose.

9. Connect the second hose which is fixed to the middle of the motor housing to the remaining

liner connection.

WARNING

Position this product away from the pool, so as to prevent children from

climbing on it and accessing the pool.

The installation instruction shall provide information on requirements specified for the electrical

installation and shall include reference to national wiring rules.

THREADED FILTER

HOUSING COLLAR

HOSE NUT

OUTLET HOSE

WATER LEVEL

ADJUSTABLE POOL

INLET JET NOZZLE

INSIDE LINER

WALL

THREADED

STRAINER

CONNECTOR

OUTSIDE LINER

WALL

(ILLUSTRATION NOT TO SCALE)

INLET HOSE

PLUNGER VALVE

ASSEMBLY

FILTER CARTRIDGE

INSIDE

MOTOR

HOUSING

AIR RELEASE

VALVE

FILTER HOUSING

COVER

HOSE O-RING

TRANSFORMER

AIR JET VALVE

INLET THREADED

AIR CONNECTOR

Andere Handbücher für Krystal Clear C1500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intex Wasserpumpe Handbücher

Intex

Intex Fast-Fill AP619C Bedienungsanleitung

Intex

Intex Quick-Fill AP641 Bedienungsanleitung

Intex

Intex Quick-Fill 58609 Bedienungsanleitung

Intex

Intex SF80220RC-1 Bedienungsanleitung

Intex

Intex CS20110 Bedienungsanleitung

Intex

Intex PureSpa SSP-H-10-2 Bedienungsanleitung

Intex

Intex Krystal Clear 604 Bedienungsanleitung

Intex

Intex 602 Bedienungsanleitung

Intex

Intex ECO15230-2 Bedienungsanleitung

Intex

Intex Quick-Fill AP632 Bedienungsanleitung

Intex

Intex Krystal Clear 604 Bedienungsanleitung

Intex

Intex Krystal Clear 601 Bedienungsanleitung

Intex

Intex SP20220 Bedienungsanleitung

Intex

Intex Quickfill AP620D Bedienungsanleitung

Intex

Intex Krystal Clear 604 Bedienungsanleitung

Intex

Intex 164124NP Bedienungsanleitung

Intex

Intex Krystal Clear SF10220 Bedienungsanleitung

Intex

Intex Krystal Clear SF40220RC Bedienungsanleitung

Intex

Intex Krystal Clear CS15110 Bedienungsanleitung

Intex

Intex AP619A Bedienungsanleitung

Intex

Intex SF15220 Bedienungsanleitung

Intex

Intex QuickFill AP636 Bedienungsanleitung

Intex

Intex Quick-Fill AP642 Bedienungsanleitung

Intex

Intex Krystal Clear C1500 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung