IOGear GHPU01 Bedienungsanleitung

HomePlug USB Adapter

UserManual(GHPU01)

Thankyouforpurchasingoneofthemostuser-friendlynetworkingdevicesonthemarket.IOGEAR’sHomePlugto

USB adapters are first-class networking devices designed to network your computers at home (or in your small

office). This device allows you to set up your home network via the most pervasive medium in your house – the

homepowerlines.Itiseasytosetup,anditdoesn’trequireanyadditionalwiringinthehouse.

Tobetter serve you, IOGEARoffers an array of additionalUSB 2.0, USB 1.1,FireWire, KVM, and other peripheral

products. For more information or to purchase additional IOGEAR products, visit us at www.IOGEAR.com

Wehope you enjoy using yourIOGEAR HomePlug to USB adapter,another first-rate connectivity solution from

IOGEAR.

IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and

Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business

Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no

warranty of any kind with regards to the information presented in this document. All information furnished here is for

informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any

inaccuracies or errors that may appear in this document.

Welcome

Table of Contents

Overview

Features

Requirements

Introduction

Installation

Network Configuration

Networking Basics

- Network Setup Wizard

- Checking IP Address

- Assign a Static IP Address

- Sharing Disks/Folders

- Sharing Printers

- Accessing the Internet

Troubleshooting

Technical Support

Product Specifications

Limited Warranty

Overview

IOGEAR’s HomePlug Powerline Network USB Adapter allows you to network your home computers through

the electric power lines in the house. Setting up a home network has never been so simple, just

install the driver, plug the USB end to your computer and plug the power end to your AC power outlet.

That’s it, you are connected!

This unit is compliant to HomePlug Powerline Specification 1.0 and USB 1.1 Specification, and offers up to

12 Mbps bandwidth while being less prone to interference. By offering 56-bit DES encryption, it is also

much more secure than other home networking technologies such as wireless Ethernet.

Features

• No extra wires, using the most pervasive medium in your home – power lines

• Allows multiple computers to share Internet access, printers, and other resources through the power

lines

• Very easy and intuitive to set up and install

• HomePlug Powerline Specification 1.0 compliant

• USB 1.1 Specification compliant

• Up to 12 Mbps bandwidth

• Up to 990’ distance through the power lines, far enough for most households

• Worldwide compatibility

• Low risk of interference by other RF sources

• 56-bit DES encryption assures data security

• Signal will not pass power meter, thus keeping the data safe in the house

• Encryption done by hardware, with no sacrifice on bandwidth

• Most reliable home networking technology

• Available USB port and CD-ROM drive for the Windows based computer that you plan to install this

device to

• Windows 98, 98SE, ME, 2000, and XP

• Available power outlet in room

• Standard home power line wiring

Requirements

SystemRequirements

IOGEAR’s HomePlug to USB adapter allows you to network your computers via your current existing

home power line. It offers a data transmission speed of up to 12 Mbps, and to reach up to 990 feet

through standard power lines.

Packagecontents:

1. HomePlug to USB adapter (drawing)

2. USB Cable (drawing)

3. Power Cable (drawing)

4. User Manual

5. Warranty/Registration card

Introduction

1. 2. 3.

Introduction

Front View: (Drawing)

1. Power LED – lights up in green when plugged into a power outlet

2. Collision LED – lights in green whenever there is collision

3. Link LED – lights up in green when plugged into a power outlet

4. ACT LED – blinks in green when there are network activities

5. USB port – connecting to the computer

Back View: (Drawing)

1. Power port – connecting to the wall outlet

Installation

Note:

Do not place HomePlug devices under direct sunlight or near high-heat-emitting devices;

Do not place HomePlug devices near water or wet surfaces to avoid electric hazards;

Do not place HomePlug devices on any moving or unstable surfaces;

It is recommended that you plug the HomePlug devices directly into the wall outlets, not to any power

adapters, surge protectors or any device that filters signals.

1.Remove the HomePlug to USB adapter, the power cord, the USB cable and the installation CD from

the package.

2.Allocate a space for the adapter’s placement. Make sure you avoid the places mentioned

above.

3.Make sure that your HomePlug USB Adapter is NOT plugged in before you install the driver first.

4.If you currently have a 10/100 Base-T network interface card installed in your computer, please

disable the card first.

5.Disable the Microsoft VPN if you have it in your system.

(Note: The following driver installation steps are under Windows XP. Other operating systems will have the similar steps

but the screen may appear different. For Windows 98SE, ME and 2000, you may be prompted to use the Windows CD

under 98SE and ME.)

Inhaltsverzeichnis

Andere IOGear Adapter Handbücher

IOGear

IOGear KeyMander 2 Installationsanleitung

IOGear

IOGear GUC210T Bedienungsanleitung

IOGear

IOGear GUC232A Kurzanleitung

IOGear

IOGear GBS301 Bedienungsanleitung

IOGear

IOGear GWAVR Bedienungsanleitung

IOGear

IOGear GWU513 Bedienungsanleitung

IOGear

IOGear GigaLinq Pro 3.1 Bedienungsanleitung

IOGear

IOGear GBU211 Bedienungsanleitung

IOGear

IOGear GBU301 Bedienungsanleitung

IOGear

IOGear GUV301 Bedienungsanleitung

IOGear

IOGear GWU735 Bedienungsanleitung

IOGear

IOGear GUH3C14 Bedienungsanleitung

IOGear

IOGear GWU625 Bedienungsanleitung

IOGear

IOGear GBC232A Bedienungsanleitung

IOGear

IOGear GKMB01 Bedienungsanleitung

IOGear

IOGear GWAVR Bedienungsanleitung

IOGear

IOGear UpStream GUV302P Bedienungsanleitung

IOGear

IOGear GUF202 Bedienungsanleitung

IOGear

IOGear M1161 Bedienungsanleitung

IOGear

IOGear GBU301 Bedienungsanleitung

IOGear

IOGear Cardbus Card GPU202 GPU202 GPU202 Bedienungsanleitung

IOGear

IOGear GWU635 Bedienungsanleitung

IOGear

IOGear Enhanced Data Rate Bluetooth USB Adapter... Bedienungsanleitung

IOGear

IOGear M1063 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung