IOGear UpStream GUV302P Bedienungsanleitung

www.iogear.com

GUV302P

PART NO. Q11635

Quick Start Guide

UpStream™Mobile Capture Adapter

Guide de démarrage rapide

UpStream™Adaptateur de capture mobile

Guía de conﬁguración rápide

UpStream™Adaptador de captura móvil

1 x GUV302P Upstream Mobile Capture Card

1 x USB-C®to USB-C Cable

1 x USB-C to USB-A Cable

1 x ¼” Camera Adapter Screw

1 x Quick Start Guide

Package Contents

System Requirements

• Windows®10 and above

• Mac OS X®10.13

• Android V5.x and above with UVC support

• One available USB 3.2 Type-C or Type-A port

• CPU: Intel® Core™ i3 Dual Core Processor 2.8Ghz or higher

• RAM: 4GB or higher

• Stream software with UVC device support**

Product Overview

Mode Switch (PC/Phone Mode)

USB-C UVC Output Port

USB-C PD Passthrough Port

¼” Camera Mount Adapter

HDMI®Loop-out Port

HDMI®Input Port

Hardware Installation

1. Connect the USB-C UVC Output Port to the host (e.g. laptop

or Android Phone) using a USB-C Cable (included). Or, if

your laptop only has a USB-A interface, connect the USB-C

to USB- A Cable (included) to the host.

2. Connect HDMI Source (480p/720p/1080p/4K@60hz) device

to the HDMI input port.

3. (Optional) Connect the HDMI Loop out Port to a spare

HDMI-Enabled display using an HDMI cable (not included) to

display your HDMI content.

Or Or

4. (Optional) Connect a USB power source to the USB-C DC-in

port for additional power to the GUV302P.

5. (Optional) The LED will light up when the GUV302P is in

phone mode.

6. (Optional) Attach the GUV302P to the camera with appropriate

camera accessories.

*GUV302P cannot display or capture HDCP protected content.

**Below lists some examples of supported video recording / live streaming

software. All trademarks are property of their respective owners.

OBS: https://obsproject.com

CameraFi: https://www.camerafi.com

Xsplit: https://www.xsplit.com

https://www.youtube.com

https://www.facebook.com

IOGEAR and the IOGEAR logo are registered trademarks of Aten Technology, Inc.

USB Type-C and USB-C are registered trademarks of USB Implementers Forum. The terms

HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. Windows is either a

registered trademark or trademark of Microsoft Corporation in the United States and/or

other countries. Mac, macOS, iPadOS, and iPad Pro are trademarks of Apple Inc.,

registered in the U.S. and other countries. Android is a trademark of Google LLC. Intel and

Intel Core are trademarks of Intel Corporation or its subsidiaries. All other trademarks are

the properties of their respective owners.

Limited Warranty

Contact

Warranty Information

This product carries a 1 Year Limited Warranty.

For the terms and conditions of this warranty, please go to

https://www.iogear.com/support/warranty

Important Product Information

Product Model ______________

Serial Number ______________

WE’RE HERE TO HELP YOU!

NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

IOGEAR

https://iogear.custhelp.com

support@iogear.com

www.iogear.com

Compliance Information

This equipment has been tested and found to comply with the limits for a Class B

digital service, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to

operate this equipment. This equipment generates, uses, and can radiate radio

frequency energy. If not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

- Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CE Statement: This device has been tested and found to comply with the following

European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage

(2006/95/EC) and R&TTED (1999/5/EC).

1 x GUV302P Upstream Adaptateur de capture mobile

1 x câble USB-C vers USB-C

1 x câble USB-C vers USB-A

1 x vis d'adaptateur de caméra ¼ "

1 x guide de démarrage rapide

Contenu de l'emballage

Configuration système requise

• Windows®10 et supérieur, Mac OS X®10.13, Android®V5.x et

supérieur avec UVC soutien

• Un port USB 3.2 Type-C ou Type-A disponible

• CPU: Intel® Core™ i3 Dual Core 2.8Ghz ou supérieur

• RAM: 4 Go ou plus

• Logiciel de diffusion en continu avec prise en charge des

appareils UVC **

L’aperçu du produit

Commutateur de mode (mode PC / téléphone)

Port de sortie USB-C UVC

Port USB-C PD Passthrough

Adaptateur de montage pour caméra ¼ ”

Port de sortie en boucle HDMI

Port d'entrée HDMI

Installation du matériel