ION Party Boom FX Bedienungsanleitung

Party Boom FX

User Guide English ( 2 – 8 )

Guía del usuario Español ( 9 – 15 )

Guide d’utilisation Français ( 16 – 22 )

Appendix English ( 15 )

User Guide (English)

Introduction

Thank you for purchasing the Party Boom FX. At ION, your entertainment is as important to us

as it is to you. That’s why we design our products with one thing in mind—to make your life

more fun and more convenient.

Box Contents

Party Boom FX

Microphone with Cable

Power Cable

1/8” (3.5 mm) Stereo Aux Cable

Quickstart Guide

Safety & Warranty Manual

Note: Before you first use the product, please fully charge the battery. Your unit was

purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging,

power off the speaker while charging.

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Setup

Items not listed under Introduction >Box Contents are sold separately.

1. For optimal performance, place Party Boom FX in the center of the room so it is

unobstructed by walls, furniture, etc.

2. Turn down the Master Volume on the Party Boom FX.

3. Connect the included power cable from the power input to a power outlet.

4. (Optional) Connect the included microphone to the microphone input.

5. Turn on Party Boom FX.

6. Connect your music player with an audio cable or Bluetooth (see Connecting with a

Bluetooth Device for more details on this).

7. Adjust the volume on your music player and on Party Boom FX as needed.

8. Turn off Party Boom FX when not in use.

Tablet, MP3

Player, etc.

Microphone

Bluetooth

Device

Features

1. Display: Displays the current radio station, battery status, and Bluetooth status.

•Charging Indicator:

•When the power cable is connected, movement of the battery segments shows

the battery is charging. When fully charged, all battery segments will be lit without

blinking.

•When the power cable is disconnected, the battery segment shows the level of

the battery.

•When the battery level is low, the bottom battery segment will blink.

•If a front panel button is not pressed within 60 seconds, the battery level indicator

will turn off (to save energy). The battery level indicator will reappear when any

button is pressed. Also, when the battery gets to the lowest battery icon segment,

the battery level indicator will turn back on.

•Lightning Bolt Icon: The lightning bolt icon will illuminate when the power cable is

connected to wall power.

•Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Party

Boom FX.

•Power Icon: The power icon will be lit when Party Boom FX is powered on. The

power icon will not be lit when Party Boom FX is powered off.

•Bass Boost Icon: The Bass Boost icon will be on when the Bass Boost function is

activated. The icon will be off when the function is deactivated.

•Link Icon: The Link icon will be on when stereo linked to another speaker. The Link

icon will be off when a single speaker is used.

2. Power Button: Turns Party Boom FX on or off. Please note that while Party Boom FX is

connected to a power source, it does not need to be powered on to charge the battery.

When the power is on, the display will show the power indicator.

3. Bass Boost: Press this button to enhance the overall bass frequency response.

4. Radio Selector: This button sets the Radio to FM1, FM2, AM or turns the radio off.

5. AM/FM Presets: Store a favorite radio station and quickly tune to a preset radio station.

There are 4 numeric positions to store AM band presets and 2 banks of 4 numeric

positions each to store FM1 and FM2 band presets.

6. Bluetooth Button: Press and release this button to start pairing. Press the Bluetooth

button to disconnect a paired Bluetooth device.

7. Play/Pause: Press to play or pause a track from a connected Bluetooth device.

Tip: If you would like to disable (or enable) the voice prompts, press and hold this button

for 5 seconds.

8. Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the

previous/next track on a Bluetooth connected device. To “seek” (jump to the next available

station), hold either button down for a few seconds until it starts to seek a station. The unit

will remember the last station it was on and start at that station when powered off and on

again.

9. Lights: Press this button to select how the lights function:

•Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light

mode button to freeze the lights on one color.

•Beat Sync: The lights react to the beat of the music. If there is no music playing, the

lights will cycle through colors.

•Off: The lights turn off.

10. Sound FX: Press these buttons to trigger Sound FX. Sound FX will interrupt Bluetooth

audio and mix over the radio, aux input and mic input.

11. FX Bank: Press this button to switch between banks of Sound FX.

12. Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3

player, or other audio source.

13. Microphone Input with Volume Control (1/4”): Connect the included 1/4" (6.35 mm)

microphone with cable to this input. Adjust the knob to control the volume.

14. Master Volume Control: This adjusts the speaker’s main mix volume, which includes the

Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.

15. USB Charging Port: Connect your device’s charge cable here to charge it. USB charging

only functions when the unit’s power is turned on.

Operation

Connecting with a Bluetooth Device

1. Turn on your Bluetooth device.

2. Power on Party Boom FX. When the unit is powered on, the speaker will automatically

enter pairing mode. The Bluetooth icon on the display will start to blink when attempting to

pair. If you have previously connected to another Bluetooth device, Party Boom FX will

reconnect.

3. In your Bluetooth device’s setup screen, find Party Boom FX and connect. The Bluetooth

icon on the display will be lit solid when paired.

4. To disconnect pairing and enter pairing mode if the Bluetooth icon is lit solid, press and

release the Bluetooth button.

Tip: If you would like to disable (or enable) the voice prompts, press and hold the Play/Pause

button for 5 seconds.

To pair an NFC-enabled device, tap your device on the "N" logo on the top panel.

Note: If you experience trouble connecting or playing music, update your device's OS.

App Control

IMPORTANT: To ensure the best possible experience with the app, use the most current

Android OS or iOS on your device.

Note: Ensure that your device has internet access via your service provider or wireless

connection. You can also download the app on your computer, but remember to connect and

sync your device to transfer the app.

Follow these steps to download the free app on your device:

1. Open the Apple App Store or Google Play on your device.

2. Search for the ION Sound XP app.

3. Follow the on-screen instructions to download and install the app.

Once downloaded, the ION Sound XP app will appear on your device's home screen.

Light Modes

Press the Light Mode button to toggle between three modes for the lights on the front panel:

•Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light

mode button to freeze the lights on one color.

•Beat Sync: The lights react to the beat of the music. If there is no music playing, the lights

will cycle through colors.

•Off: The lights turn off.

Sound FX

To trigger Sound FX, briefly press any of the FX Buttons. Sound FX will interrupt Bluetooth

audio and mix over the radio, aux input and mic input.

To switch between banks of sounds, press the FX Banks button. Each of the three available

banks feature four sounds assigned to the FX Buttons:

Color BANK 1 – Drum Kit BANK 2 - DJ BANK 3 - FX

SOUND 1 Orange Hand Clap Ooh! 8-Bit Fall

SOUND 2 Green Hi Hat DJ Scratch 8-Bit Jump

SOUND 3 Violet Kick Drum Whoop FX DJ Hit

SOUND 4 Blue Snare Drum Scratch Baby Slow Down

To turn off the FX Buttons lights, press and hold the FX Banks button.

Using the Radio

1. Press the Radio button to select FM1, FM2, or AM.

2. Press either of the Tune/Track buttons to select a radio station. Tap the Tune/Track

buttons to tune in a radio station, or hold these buttons to “seek” (jump to the next

available station).

3. Press and hold a numeric preset button to assign the current station to that preset

number. The display will show “SAV” to show the station has been saved.

4. To use an added preset, press a preset number once lightly to go to the stored radio

station.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical

instrument. Also, try to reduce the overall volume of Party Boom FX.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower

the bass level. This will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably

feedback. Point the microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume

from your source.

If you can’t play music from a flash drive: The USB port is only for charging USB devices.

If you cannot connect your audio device to Party Boom FX via Bluetooth:

•Have your audio device (e.g., smartphone or tablet) and Party Boom FX as close together

as possible while trying to connect. Make sure both the audio device and Party Boom FX

are unobstructed by walls, furniture, etc.

•Reset the Bluetooth connection on Party Boom FX to disconnect Party Boom FX from

any other audio device and restart the search process. If this does not work right away,

power off Party Boom FX and then power it back on. See Connecting with a Bluetooth

Device for more information.

•Reset the Bluetooth connection on your audio device by turning Bluetooth off and back

on. You can find this under the Bluetooth menu in the Settings for your phone or other

audio device.

If this does not work, and you have connected to Party Boom FX before, find Party Boom

FX in the list of available or previously connected devices in your audio device's

Bluetooth menu, tap the "gear" or “i” icon located next to it and then select Unpair or

Forget. Turn Party Boom FX off and back on and try pairing again once it reappears in

your available devices list.

Note: If Party Boom FX has been paired to another audio device recently that is still

within range, you may need to repeat this process with that audio device to fully

disconnect.

Guía del usuario (Español)

Introducción

Gracias por comprar el Party Boom FX. En ION, su entretenimiento es tan importante para

nosotros como para usted. Por eso es que diseñamos nuestros productos con una sola cosa

en mente—hacer que su vida sea más divertida y cómoda.

Contenido de la caja

Party Boom FX

Micrófono y cable

Cable de alimentación

Cable auxiliar estéreo de 3,5 mm (1/8 pulg.)

Guía de inicio rápido

Manual sobre la seguridad y garantía

Nota: Antes de utilizar por primera vez el producto, cargue completamente la batería. Su

unidad se despachó intencionalmente con una carga reducida de la batería por razones de

seguridad en el tránsito. Para lograr una carga óptima, apague el altavoz mientras lo esté

cargando.

Soporte

Para obtener la información más reciente acerca de este producto (documentación,

especificaciones técnicas, requisitos de sistema, información de compatibilidad, etc.) y

registrarlo, visite ionaudio.com.

Para obtener soporte adicional del producto, visite ionaudio.com/support.

Instalación

Los elementos que no se enumeran en Introducción >Contenido de la caja se venden por

separado.

1. Para lograr un rendimiento óptimo, coloque el Party Boom FX en el centro de la sala

donde no esté obstaculizado por paredes, muebles, etc.

2. Baje el control de volumen maestro del Party Boom FX.

3. Conecte el cable de alimentación incluido desde la entrada de alimentación a una toma

de corriente.

4. Conecte el micrófono incluido a la entrada de micrófono.

5. Encienda el Party Boom FX.

6. Conecte su reproductor de música con un cable de audio o Bluetooth (para obtener más

detalles de esto, consulte Conexión con un dispositivo Bluetooth).

7. Ajuste el volumen en su reproductor de música y en Party Boom FX según sea necesario.

8. Apague el Party Boom FX cuando no lo use.

Micrófono

Tableta, reproductor

de MP3, etc. Dispositivo

Bluetooth

Andere Handbücher für Party Boom FX

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere ION Sprecher Handbücher

ION

ION Explorer XL Bedienungsanleitung

ION

ION Party Bot Micro Bedienungsanleitung

ION

ION Glow Rocker Bedienungsanleitung

ION

ION ANYROOM Bedienungsanleitung

ION

ION ROAD ROCKER Bedienungsanleitung

ION

ION Block Rocker XL Bedienungsanleitung

ION

ION PLUNGE Bedienungsanleitung

ION

ION TAILGATER SMART Bedienungsanleitung

ION

ION Slam Jam Bedienungsanleitung

ION

ION PATHFINDER GO Bedienungsanleitung

ION

ION Highlander iPA103B Bedienungsanleitung

ION

ION PATHFINDER GO Bedienungsanleitung

ION

ION PARTY ROCKER Bedienungsanleitung

ION

ION ISP16 Bedienungsanleitung

ION

ION PRO GLOW EXPRESS Bedienungsanleitung

ION

ION party starter Bedienungsanleitung

ION

ION All-Star Guitar Bedienungsanleitung

ION

ION Adventurer ADVENTURERXUS Bedienungsanleitung

ION

ION ISP75A Bedienungsanleitung

ION

ION Tahiti Bedienungsanleitung

ION

ION Party Rocker Plus Bedienungsanleitung

ION

ION Game Day Bedienungsanleitung

ION

ION TAILGATER GO Bedienungsanleitung

ION

ION SOUND SPLASH Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung