Izon EXOID Bedienungsanleitung

GETTING STARTED WITH

YOUR EXOID

WELCOME TO THE IZON FAMILY

Before you can get started on unpacking and installing your exciting

new system, there are a few important things to cover:

If you require an IQ/OQ (also known as 3Q) installation, please remove the

Solution S and TKP200 particles from the Training Kit and store them at

4-8°C. Close the box and set it aside for when your certified Izon Science IQ/

OQ executor is present.

If you do not require an IQ/OQ installation you can unpack and set up the rest

of your system according to the instructions in the Exoid User Manual. MAKE

SURE TO PAY CLOSE ATTENTION TO THE INSTRUCTIONS ON THE OTHER

SIDE OF THIS PAGE WHEN PLUGGING IN THE INSTRUMENT!!

The Exoid User Manual (for non-IQ/OQ installations) can be found by going to

https://cdn.brandfolder.io/ZPO3JAFV/at/7nsx5grn5zqq4kxpsfp8pb5/Exoid_

Manual_B.pdf

The User Manual has detailed instrument descriptions and installation

information which you will need to read through in its entirety before

operating the equipment.

For extra support, proceed to support.izon.com

www.izon.com

Power Socket Power Switch USB Socket

THE FOLLOWING INSTRUCTIONS MUST BE FOLLOWED

CAREFULLY AND PRECISELY.

FAILURE TO DO SO WILL MOST LIKELY RESULT IN A TOTAL

MALFUNCTION OF THE EXOID, REQUIRING A RETURN TO

IZON FOR REPAIR.

Ensure that the power switch is in the off position. The off position is

where the full “O” symbol is pressed down, as indicated in the image

below.

Plug the power and USB cables into the appropriate sockets as

indicated in the image below.

Turn the power switch on.

This order of operation MUST be followed any time the Exoid becomes

unpowered, including power cycling during troubleshooting. During a loss

of power event, the power switch must first be switched off and then

the USB cable removed. Failure to turn the switch off may result in Exoid

malfunction, while failure to remove the usb cable will result in an inability

for the Exoid to communicate with the software correctly.

Rev C

Andere Handbücher für EXOID

Inhaltsverzeichnis

Andere Izon Laborausrüstung Handbücher

Izon

Izon AUTOMATIC FRACTION COLLECTOR V2 Bedienungsanleitung

Izon

Izon AFC V2 Bedienungsanleitung

Izon

Izon qEV Bedienungsanleitung

Izon

Izon EXOID Bedienungsanleitung

Izon

Izon AUTOMATIC FRACTION COLLECTOR V2 Bedienungsanleitung

Izon

Izon EXOID Bedienungsanleitung

Izon

Izon AUTOMATIC FRACTION COLLECTOR V1 Bedienungsanleitung

Izon

Izon qNano Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung