JABSCO 4560 Series Bedienungsanleitung

Model 4560-Series

4590-Series

4620-Series

Model 4560-Series,

4590-Series, 4620-Series

SELF-PRIMING PUMPS

FEATURES

Body: Bronze Construction

Impeller: Neoprene or Nitrile

Shaft: Stainless Steel

Shaft Seal: Packing Type

Bearings: Plain

Ports: Model 4560-Series 1/2"NPT

Model 4590-Series 3/4"NPT

Model 4620-Series 1"NPT

Weight: Model 4560-Series 3-3/4 lb (1.7 kg)

Model 4590-Series 5 lb (2.3 kg)

Model 4620-Series 5-1/4 lb (2.4 kg)

VARIATIONS AVAILABLE

Model Variation Incorporated

4560-0001 Neoprene Impeller

-0003 Nitrile Impeller

4590-0001 Neoprene Impeller

-0003 Nitrile Impeller

4620-0001 Neoprene Impeller

-0003 Nitrile Impeller

APPLICATIONS

MARINE: Pumping bilges, washdowns, circulating water

in bait tanks, utility dockside pump, engine cooling.

INDUSTRIAL: Circulating and transferring, velocity-mix-

ing, pumping machine tool coolants, return spill, sump

drainage, chemicals, pharmaceuticals, soap, liquors,

ink, dyes, alcohol, various acids, tanning liquors, glycer-

ine, brine, etc.

FARMING: Pumping water for stock, pumping water

from shallow wells and cisterns, pumping liquid ballast

into tractor tires.

PLUMBING & HOME EMERGENCY USE: Pumping out

flooded basements, cesspools, sumps, water heaters

and water closets, drains and sinks, draining fishponds

and pools.

OPERATING INSTRUCTIONS

1. INSTALLATION – Pump may be mounted in any

position. Intake and discharge ports are determined

by the direction of shaft rotation (refer to Dimen-

sional Drawing). Before installing, turn the pump

shaft in the direction of the operating rotation.

2. DRIVE – Belt or Direct with flexible coupling.

Belt Drive: Overtight belt load will reduce pump

bearing life. Direct Drive is recommended for oper-

ating speeds above 1750 RPM.

Direct Drive: Clearance should be left between drive

shaft and pump shaft when installing coupling.

Always mount and align pump and drive shaft before

tightening the coupling set screw.

NOTICE: If the drive pulley or coupling must be pressed

on the shaft, remove the end cover and impeller and

support the shaft from the impeller end during the press

operation. Do not hammer a pulley or coupling on the

shaft. Failure to follow the above instructions can dam-

age the pump.

3. SPEEDS – 100 RPM to the maximum shown in the

performance table. Consult the factory for operation

at speeds above those shown. For longer pump life,

operate at lowest possible speeds.

4. SELF-PRIMING – Primes at low or high speeds. For

vertical dry suction lift of 10 feet, a minimum of 800

RPM is required. Pump will produce suction lift up to

22 feet when wetted. BE SURE SUCTION LINES

AREAIRTIGHT OR PUMP WILL NOT SELF-PRIME.

Other JABSCO models are also available in bronze,

plastic and stainless steel. JABSCO Pureflo®pumps

are also available for sanitary applications.

5. RUNNING DRY – Unit depends on liquid pumped

for lubrication. DO NOT RUN DRY for more than

30 seconds. Lack of liquid will damage the impeller.

6. NOTICE – If pumping light fraction petroleum deriv-

atives, solvents, thinners, highly concentrated or

organic acids, consult Jabsco Chemical Resistance

Table (which is available upon request from ITT

Jabsco) for proper body materials and impeller

compounds. If corrosive fluids are handled, pump

life will be prolonged if pump is flushed with water

after each use or after each work day.

7. PRESSURES – Consult Head Capacity Table for

recommended maximum for continuous operation. If

pressures exceed those shown, consult the factory.

8. TEMPERATURE – Neoprene 45°–180°F (7°–82°C)

Nitrile 50°–180°F (10°–82°C).

9. FREEZING WEATHER – Drain unit by loosening

end cover. The following anti-freeze compounds can

be used without any adverse effects to the neoprene

impeller: Atlas “Permaguard”, DuPont “Zerex” and

“Telar”, Dow Chemical “Dowguard” and Olin

Mathison “Pyro Permanent”. Most Methyl alcohol

(methanol) based antifreeze can be used.

DO NOT USE PETROLEUM BASEDANTI-FREEZE

COMPOUNDS OR RUST INHIBITORS.

10. GASKET – Use a standard pump part. A thicker

gasket will reduce priming ability. A thinner gasket

will cause the impeller to bind. Std. gasket 0.010"

thick.

11. GREASE CUPS – Fill grease cups with water pump

grease. Grease cup cap should be firmly tightened

about every 50 hours of pump service while pump is

operating. Leakage may occur through grease cups

at pressures above 20 p.s.i. If this occurs, replace

grease cups with ball check grease cups.

12. SPARE PARTS – To avoid costly shut downs, keep

a Jabsco Service Kit on hand.

SERVICE INSTRUCTIONS

DISASSEMBLY

1. Remove end cover screws, end cover and gasket.

2. Remove drive coupling or pulley and loosen packing

nut.

3. Remove shaft and impeller assembly from body.

4. Slide impeller off shaft towards pump drive end.

5. Remove cam screw and cam, clean off Permatex.

6. Remove packing nut and gland.

7. Remove packing with pick or screwdriver.

8. Remove grease cup caps and clean grease cups.

Use a small wire to ensure grease passage is open

to shaft bore.

9. Inspect all parts for wear or damage and replace if

necessary.

ASSEMBLY

1. Dip new packing in SAE 10 or 20 weight oil and

install packing, packing gland and packing nut.

2. Apply sealant to cam screw threads and top and

back end of cam and install in body with cam screw.

3. Install impeller key in shaft (dress if necessary) and

slide the impeller on the shaft from the pump drive

end.

Impeller can be installed in only one direction;

pinned end of keyway toward drive end of pump.

4. Install shaft and impeller assembly in body. (Dip

shaft in SAE 10 or 20 weight oil and lube impeller

bore with water pump grease prior to assembly.)

5. Install gasket and end cover with end cover screws.

6. Fill grease cups full and grease cup caps 3/4 full with

water pump grease. Install grease cup caps and

tighten firmly.

7. Hand tighten packing nut. During operation, tighten

packing nut until pump stops dripping; set locking

nut. NOTE: Packing and shaft life will be improved if

pump is allowed to drip about 3 drops per minute.

After a few minutes of operation, re-tighten grease

cup caps.

PARTS LIST

Model 4560 Model 4590 Model 4620

Key Description Qty. Series Series Series

1Screw (End Cover) 6 91002-0020 91003-0010 91003-0010

2End Cover 1 4565-0000 4595-0000 4595-0000

3Gasket* 1 7083-0000 706-0010 706-0010

4Grease Cup 2 91501-0010 91501-0010 91501-0010

5Impeller* 1

Neoprene 4568-0001 4598-0001 4598-0001

Nitrile 4568-0003 4598-0003 4598-0003

6Key (Impeller Drive)* 1 91402-0010 91402-0010 91402-0010

7Shaft 1 4567-0000 4597-0000 4597-0000

8Cam 1 490-0001 17612-0000 17612-0000

9Screw (Cam) 1 91003-0070 91004-0010 91004-0010

10 Body 1 4564-0000 4594-0000 4624-0000

11 Lock Nut 1 4517-0000 4517-0000 4517-0000

12 Packing (Ring)* 1 3791-0000 3791-0000 3791-0000

13 Packing (Gland) 1 4518-0000 4518-0000 4518-0000

14 Packing Nut 1 4583-0000 4583-0000 4583-0000

Key Pump Drive 1 9215-0000 9215-0000 9215-0000

(not shown)

Service Kit (not shown)

w/ Neoprene Impeller 90003-0001 90004-0001 90004-0001

w/ Nitrile Impeller 90003-0003 90004-0003 90004-0003

* Parts supplied in Service Kit

EXPLODED VIEW

U.S.A.

Jabsco

1485 Dale Way, P.O. Box 2158

Costa Mesa, CA 92628-2158

Tel: 714.545.8251

Fax: 714.957.0609

UNITED KINGDOM

Jabsco

Bingley Road, Hoddesdon

Hertfordsire EN11 OBU

Tel: +44 (0) 1992 450145

Fax: +44 (0) 1992 467132

CANADA

Fluid Products Canada

55 Royal Road

Guelph, Ontario N1H 1T1

Tel: (519) 821.1900

Fax: (519) 821.2569

JAPAN

NHK Jabsco Company Ltd.

3-21-10, Shin-Yokohama

Kohoku-Ku, Yokohama, 222

Tel: 045.475.8906

Fax: 045.475.8908

GERMANY

Jabsco GmbH

Oststrasse 28

22840 Norderstedt

Tel: +49-40-53 43 73 -0

Fax: +49-40-53 53 73 -11

THE PRODUCTS DESCRIBED HEREIN ARE SUBJECT TO

THE JABSCO ONE YEAR LIMITED WARRANTY, WHICH IS

AVAILABLE FOR YOUR INSPECTION UPON REQUEST.

NOTE: Progressively longer life may be expected as operating pressures and speeds are reduced. Factory

Application Engineering assistance suggested for operation in light shaded areas and recommended for heavy

shaded areas. Capacitor type motor required. Table shows approximate Head-Flow for new pump in U.S.

gallons per minute and litres per minute, for neoprene compound impeller.

TABULATIONS FROM ABOVE DRAWING

Model A B C D E F G H I J K L M

4560- 7-1/8"5-1/8"1-7/8"Min. 4"2-1/2"1-15/16"3-3/4"3"1-1/2"3/16"1-3/16"4-1/8"1/2"NPT Int.

Series (181) (130,2) (47,6) (101,6) (63,5) (49,2) (95,3) (76,2) (38,1) (4,8) (30,2) (104,8) (2 Places)

4590- 7-7/8"5-9/16"1-3/4"Min. 4-3/16"2-1/2"1-7/8"3-15/16"3-1/8"1-9/16"3/32"1-1/2"4-1/8"3/4"NPT Int.

Series (200) (141,3) (44,5) (106,4) (63,5) (47,6) (100) (79,4) (39,7) (2,4) (38,1) (104,8) (2 Places)

4620- 7-7/8"5-5/8"1-3/4" Min. 4-3/16"2-1/2"1-7/8"3-15/16"3-1/8"1-9/16"1/8"1-1/2"4-3/4"1"NPT Int.

Series (200) (142,9) (44,5) (106,4) (63,5) (47,6) (100) (79,4) (39,7) (3,2) (38,1) (120,7) (2 Places)

HEAD CAPACITY TABLE Model 4560-0001

Total Head 500 RPM 1160 RPM 1750 RPM 2100 RPM 2450 RPM 3000 RPM 3600 RPM

p.s.i. ft. of water GPM hp GPM hp GPM hp GPM hp GPM hp GPM hp GPM hp

(kg/sq cm) (metres) (L/min) (L/min) (L/min) (L/min) (L/min) (L/min) (L/min)

4.3 10 3.0 1/6 7.6 1/4 11.0 1/2 13.0 1/2 15.2 1/2 18.0 3/4 19.6 3/4

(0,3) (3,0) (11,3) (28,8) (41,6) (49,2) (57,5) (68,1) (74,2)

8.7 20 1.8 1/6 6.4 1/4 10.0 1/2 11.5 1/2 13.7 1/2 17.0 3/4 18.8 3/4

(0,6) (6,1) (6,8) (24,2) (37,9) (43,5) (51,9) (64,3) 71,2)

13 30 — — 4.8 1/3 8.5 1/2 10.0 1/2 12.0 1/2 15.3 3/4 17.5 3/4

(0,9) (9,1) (18,2) (32,2) (37,9) (45,4) (57,9) (66,2)

21.6 50 — — — — 5.0 1/2 6.7 3/4 8.5 3/4 11.8 3/4 14.5 1

(1,5) (15,2) (18,9) (25,4) (32,2) (44,7) (54,9)

HEAD CAPACITY TABLE Models 4590-0001, 4620-0001

Total Head 500 RPM 1160 RPM 1750 RPM 2100 RPM 2450 RPM 3000 RPM

p.s.i. ft. of water GPM hp GPM hp GPM hp GPM hp GPM hp GPM hp

(kg/sq cm) (metres) (L/min) (L/min) (L/min) (L/min) (L/min) (L/min)

4.3 10 7.0 1/4 16.5 1/3 25.0 3/4 29.0 3/4 31.0 133.0 1-1/2

(0,3) (3,0) (26,5) (62,5) (94,6) (109,8) (117,3) (124,9)

8.7 20 6.5 1/4 16.0 1/3 24.5 3/4 28.5 3/4 30.5 132.5 1-1/2

(0,6) (6,1) (24,6) (60,6) (92,7) (107,9) (115,4) (123,0)

13 30 6.0 1/4 15.0 1/3 23.0 3/4 27.0 129.0 132.0 1-1/2

(0,9) (9,1) (22,7) (56,8) (87,1) 102,2) 109,8) (121,1)

21.6 50 — — 11.5 1/2 19.0 3/4 22.5 125.0 1-1/2 30.5 2

(1,5) (15,2) (43,5) (71,9) (85,2) (94,6) 115,4)

DIMENSIONAL DRAWING

Inches (Millimetres)

Dieses Handbuch passt für folgende Modelle

Andere JABSCO Wasserpumpe Handbücher

JABSCO

JABSCO 30520-1001 Bedienungsanleitung

JABSCO

JABSCO 1673-Series Bedienungsanleitung

JABSCO

JABSCO 30520-1 Series Bedienungsanleitung

JABSCO

JABSCO 11860-0005 Bedienungsanleitung

JABSCO

JABSCO 30296 Series Bedienungsanleitung

JABSCO

JABSCO 4720 Series Bedienungsanleitung

JABSCO

JABSCO 51270 Series Bedienungsanleitung

JABSCO

JABSCO 30510-5 Series Bedienungsanleitung

JABSCO

JABSCO 29200-0120 Bedienungsanleitung

JABSCO

JABSCO 52700 Bedienungsanleitung

JABSCO

JABSCO 11860 Series Bedienungsanleitung

JABSCO

JABSCO 51510 Series Bedienungsanleitung

JABSCO

JABSCO 18940-0010 Betriebsanleitung

JABSCO

JABSCO 37202-2712 Bedienungsanleitung

JABSCO

JABSCO 36600-0000 Bedienungsanleitung

JABSCO

JABSCO xylem Bedienungsanleitung

JABSCO

JABSCO 5850-0001 Bedienungsanleitung

JABSCO

JABSCO 2620 Series Bedienungsanleitung

JABSCO

JABSCO 23920-9503 Bedienungsanleitung

JABSCO

JABSCO 37202-2 Bedienungsanleitung

JABSCO

JABSCO 37202-Series Bedienungsanleitung

JABSCO

JABSCO 36960-2 Series Bedienungsanleitung

JABSCO

JABSCO 31295-0092 Bedienungsanleitung

JABSCO

JABSCO 32605 Series Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung