JABSCO 50270 Series Betriebsanleitung

Service Instructions for Jabsco

Bronze Flexible Impeller Electro

Magnetic Clutch Pump 50270 Series

Inspect all parts for wear or damage and replace if necessary.

DIS-ASSEMBLY

1. Remove end cover screws, end cover and gasket. (1,2,18)

2. Remove impeller. (3)

3. Loosen cam screw (7) and remove cam. (6)

4. Remove wear plate. (4)

5. Remove bolt from end of shaft. Screw 5/8” UNC bolt into

the hub of the pulley assembly in order to draw the pulley from the pump shaft. (27)

6. Remove the 3 screws (15) holding the ﬁeld coil onto the housing adaptor.

7. Remove ﬁeld coil. (16)

8. Remove 3 ﬁxing bolts and rear adaptor housing from bearing housing. (14,15)

9. Remove bolts from bearing housing to body and remove body from bearing housing.

(10,11,12)

10. Remove seal assambly. (19)

11. Press shaft on impeller drive end to remove shaft and bearings from bearing housing.

12. Press shaft out of bearings supporting inner race of bearing. Remove retaining rings

from shaft if necessary. (21,24)

13. Remove inner bearing seal if it needs replacing. (13)

Flanged

BSP

shop

ASSEMBLY

1. Press new seal into bearing housing with lip

facing away from bearing bore. (19)

2. Fit retaining rings onto shaft and press on

bearings. (21,24)

3. Grease seal area of shaft, push bearings

and shaft into bearing housing by pressing

on outer race of bearings. (10,20,22,25)

4. Fit adaptor housing to bearing housing,

secure with 3 bolts. (14,15)

5. Fit ﬁeld coil to adaptor using 3 bolts. Check

that centre bore of ﬁeld coil ﬁts over boss

on adaptor. (16,17)

6. Wipe pump shaft to remove any particles and check location of key. Slide pulley assem-

bly onto shaft, lining with key and secure with retaining bolt. (22,23,26,27,28)

7. Place slinger on shaft. (9)

8. Fit pump body to bearing housing securing with 4 bolts. (5,10,11,12)

9. Take new seal seat (cup rubber and seal seat), lightly grease the outside edge of cup

rubber and press into cavity in pump body with ceramic facing towards impeller bore.

10. Slide mechanical seal sub assembly over shaft until the carbon face engages against

the ceramic face of stationary seal. (19)

11. Fit wearplate. (4)

12. Coat cam screw threads, top side and back of cam, with non setting jointing compound

and ﬁt into body, securing with the cam screws. (6,7)

13. Lightly grease impeller bore and ﬁt impeller. (3)

14. Fit end cover and gasket, and secure with screws. (1,2,18)

KEY DESCRIPTION QTY KEY DESCRIPTION QTY

1 End cover 1 15 Bolt 3

2 Gasket 1 16 Field coil 1

3 Impeller 1 17 Screw 3

4 Wear plate 1 18 End cover screws 5

5 Body 1 19 Seal assembly 1

6Cam 1 20 Bearing 1

7 Cam screw 1 21 Retaining ring 1

8 Pipe plug 2 22 Shaft 1

9 Slinger 1 23 Key 1

10 Bearing housing 1 24 Retaining ring 1

11 Washer 4 25 Bearing 1

12 Bolt 4 26 Washer 1

13 Inner bearing seal 1 27 Screw 1

14 Clutch adaptor 1 28 Pulley 1

Andere JABSCO Wasserpumpe Handbücher

JABSCO

JABSCO 18400-0050 Bedienungsanleitung

JABSCO

JABSCO 30510-5 Series Bedienungsanleitung

JABSCO

JABSCO 18490-0000 Bedienungsanleitung

JABSCO

JABSCO 18590-0010 Bedienungsanleitung

JABSCO

JABSCO 36680-2 Series Bedienungsanleitung

JABSCO

JABSCO 11860 Series Bedienungsanleitung

JABSCO

JABSCO 777 Series Bedienungsanleitung

JABSCO

JABSCO 12490 Series Bedienungsanleitung

JABSCO

JABSCO 52700 Bedienungsanleitung

JABSCO

JABSCO 4560 Series Bedienungsanleitung

JABSCO

JABSCO 30560-0 Series Bedienungsanleitung

JABSCO

JABSCO 18590 Series Bedienungsanleitung

JABSCO

JABSCO 18940-0010 Betriebsanleitung

JABSCO

JABSCO 30520-5 Series Bedienungsanleitung

JABSCO

JABSCO 30520-1001 Bedienungsanleitung

JABSCO

JABSCO 33745-0000 Bedienungsanleitung

JABSCO

JABSCO 5850-0001 Bedienungsanleitung

JABSCO

JABSCO 37202-2 Bedienungsanleitung

JABSCO

JABSCO 23230-2012 Bedienungsanleitung

JABSCO

JABSCO 36600-0000 Bedienungsanleitung

JABSCO

JABSCO 18690-0000 Bedienungsanleitung

JABSCO

JABSCO 30510-0 Series Bedienungsanleitung

JABSCO

JABSCO 30520-310 Bedienungsanleitung

JABSCO

JABSCO 32605 Series Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung