Jasic EVO 2.0 TR-01 Bedienungsanleitung

1

2

Your new product

Thank you for selecng this Jasic EVO 20 product.

This product manual has been designed to ensure that you get the most from your new product.

Please ensure that you are fully conversant with the informaon provided paying parcular aenon

to the safety precauons. The informaon will help protect yourself and others against the potenal

hazards that you may come across.

Please ensure that you carry out daily and periodic maintenance checks to ensure years of reliable and

trouble free operaon.

Please call your Jasic distributor in the unlikely event of a problem occurring.

Please record below the details from your product as these will be required for warranty purposes and

to ensure you get the correct informaon should you require assistance or spare parts.

Date purchased ________________________________________

From where ________________________________________

www.jasic-warranty.co.uk

Disclaimer

Whilst every eort has been made to ensure that the informaon contained within this manual is

complete and accurate, no liability can be accepted for any errors or omissions.

Please Note:

Products are subject to connual development and may be subject to change without noce.

Regularly check our product pages at www.jasic.co.uk for revision updated operang manuals.

No part of this manual may be copied or reproduced by any means without the wrien permission

of Wilkinson Star Limited.

3

PACKAGE CONTENTS AND UNPACKING

Supplied within your new Jasic EVO product package will be the following items.

Use care when unpacking the contents and ensure all items are present and not damaged.

If damage is noted or items are missing, please contact the supplier in the rst instance and before

installing or using the product.

If applicable, record the product model, serial numbers and purchase date in the informaon secon

found on the inside front page of this assembly instrucon manual.

Jasic EVO TR-01 & TR-02 Trolley

(To be used with the Jasic EVO ET-200P ACDC welding and EP-45SC cung machines).

Please Note:

Package contents may very depending on country locaon and package part number purchased

4

ASSEMBLY INFORMATION

For further informaon refer to the operang manual of the product you are ng this trolley too.

5

ASSEMBLY INFORMATION

TIG Filler Wire Holder Fing Instrucons

• Fit the TIG ller wire holder base to locaon A as shown in the below image.

• Fit the TIG ller wire holder to locaon B as shown in the below image.

B

A

6

NOTES

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

7

NOTES

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________

8

September 2023 Issue 2

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Jasic Schweißsystem Handbücher

Jasic

Jasic MIG500P Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200PACDC Bedienungsanleitung

Jasic

Jasic MIG160PFC Bedienungsanleitung

Jasic

Jasic MIG SERIES Bedienungsanleitung

Jasic

Jasic ARC400 Bedienungsanleitung

Jasic

Jasic L20701 Bedienungsanleitung

Jasic

Jasic Power Arc 160 PFC Bedienungsanleitung

Jasic

Jasic EVO 2.0 EM-200CT Bedienungsanleitung

Jasic

Jasic ARC 160GS Bedienungsanleitung

Jasic

Jasic TIG Series Bedienungsanleitung

Jasic

Jasic TIG 200 Dual Voltage Bedienungsanleitung

Jasic

Jasic Cut 160 Bedienungsanleitung

Jasic

Jasic MIG250P Bedienungsanleitung

Jasic

Jasic MIG SERIES Bedienungsanleitung

Jasic

Jasic ARC PFC Series Bedienungsanleitung

Jasic

Jasic MIG 350P Bedienungsanleitung

Jasic

Jasic Arc 140 Bedienungsanleitung

Jasic

Jasic MIG 350C Bedienungsanleitung

Jasic

Jasic JP-25C Bedienungsanleitung

Jasic

Jasic TIG200 Bedienungsanleitung

Jasic

Jasic JM-160C Bedienungsanleitung

Jasic

Jasic EVOLVE200 PLUS Bedienungsanleitung

Jasic

Jasic MIG 200 PFC Bedienungsanleitung

Jasic

Jasic EVOLVE 200 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung