JB Systems INTRUDER Bedienungsanleitung

Other languages can be downloaded from:

WWW.JB-SYSTEMS.EU

ENGLISH

Operation Manual

Version: 1.0

INTRUDER

JB LOGO MET

JUISTE SPACING

(enkel voor JBS !!!)

FOTO / TEKENING

TOEVOEGEN

ENGLISH

USER MANUAL

JB SYSTEMS®

1/11

INTRUDER

OPERATION MANUAL

Thank you for buying this JB Systems®product. To take full advantage of all possibilities and for your own

safety, please read these operating instructions very carefully before you start using this unit.

FEATURES

•Powerful but extremely compact moving wash equipped with 7x40W RGBW LEDs

•Very fast pan and tilt movements

•5-50° zoom controlled by DMX

•0-100% dimming and different strobe effects.

•Silent operation even at full output.

•Excellent built-in programs for wonderful, ever-changing, light shows.

•Multiple working modes:

•DMX-control: via 7, 11, 16 or 21 channels

•Standalone: automatic and sound activated with internal mic

•Master/slave: Wonderful synchronized shows in standalone mode

•Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq®order code: B04645)

•The 40W RGBW LEDs are driven at 30W for excellent cooling and long-lasting performance of the LEDs.

•Color LCD-display for easy menu navigation

•3p XLR connectors for DMX in- and output.

•PowerCon®compatible power in- and output

BEFORE USE

•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do

not use the device and consult your dealer first.

•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary

for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused

by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects

or problems caused by disregarding this user manual.

•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user

manual.

Check the contents:

Check that the carton contains the following items:

•INTRUDER unit

•1 Omega-bracket

•Power cable with Lockable Power Connector

•Operating instructions

ENGLISH

USER MANUAL

JB SYSTEMS®

2/11

INTRUDER

SAFETY INSTRUCTIONS:

•To protect the environment, please try to recycle the packing material as much as possible.

•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

•This unit is for indoor use only.

•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign

object enters the unit, immediately disconnect the mains power.

•Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture

must be fixed at least 50cm from surrounding walls.

•Don’t cover any ventilation openings as this may result in overheating.

•Prevent use in dusty environments and clean the unit regularly.

•Keep the unit away from children.

•Inexperienced persons should not operate this device.

•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

•Allow the device about 10 minutes to cool down before to start servicing.

•Always unplug the unit when it is not used for a longer time or before to start servicing.

•The electrical installation should be carried out by qualified personal only, according to the regulations for

electrical and mechanical safety in your country.

•Check that the available voltage is not higher than the one stated on the unit.

•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

•Never let the power-cord come into contact with other cables!

•This fixture must be earthed in order to comply with safety regulations.

•Don’t connect the unit to any dimmer pack.

•Always use an appropriate and certified safety cable when installing the unit.

•In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.

•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same

type and electrical specifications!

•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

•The housing and the lenses must be replaced if they are visibly damaged.

•Please use the original packing when the device is to be transported.

•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering

from epilepsy.

CAUTION: To reduce the risk of electric shock, do not remove

the top cover. No user-serviceable parts inside. Refer servicing

to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the

use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instructions in the literature accompanying

this appliance.

This symbol means: indoor use only

This symbol means: Read instructions

CAUTION: Do not stare at operating lamp.

May be harmful to the eyes.

ENGLISH

USER MANUAL

JB SYSTEMS®

3/11

INTRUDER

OVERHEAD RIGGING

•Important: The installation must be carried out by qualified service personal only. Improper

installation can result in serious injuries and/or damage to property. Overhead rigging requires

extensive experience! Working load limits should be respected, certified installation materials

should be used, the installed device should be inspected regularly for safety.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

•Locate the fixture in a well-ventilated spot, far away from any flammable materials and/or liquids. The

fixture must be fixed at least 50cm from surrounding walls.

•The device should be installed out of reach of people and outside areas where persons may walk by or be

seated.

•Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s

weight.

•Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.

This secondary safety attachment should be installed in a way that no part of the installation can drop

more than 20cm if the main attachment fails.

•The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!

•Don’t cover any ventilation openings as this may result in overheating.

•The operator has to make sure that the safety-relating and machine-technical installations are approved by

an expert before using them for the first time. The installations should be inspected every year by a skilled

person to be sure that safety is still optimal.

HOW TO SET UP THE UNIT

FRONT + BACK PANEL:

1. DISPLAY: shows the information on the different modes and functions.

2. DISPLAY MODE BUTTONS:

•▼button : press this button to go down in the menu

•▲button : press this button to go up in the menu

•ENTER: press this button to confirm the selected function in the menu

•MENU: press this button to go back to the main menu or to leave submenus.

3. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect the unit to a

PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the

(optional) WTR-DMX DONGLE from BRITEQ®and you will get wireless DMX! Moreover you will be able

to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX

function with all connected units! No extra settings to be made in the setup menu, just follow the

procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ®. The separate

WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: B04645)

ENGLISH

USER MANUAL

JB SYSTEMS®

4/11

INTRUDER

4. DMX IN: 3p XLR Male connector receive DMX data from a console or use in Master/slave mode.

5. DMX OUT: 3p XLR Female connector to connect other projectors or use in Master/slave mode.

6. FUSE HOLDER

7. POWER IN: Connect the mains input cable here.

8. POWER OUT: used to daisy chain the power to several other fixtures. Always pay attention to the

maximum load while adding fixtures! Special combi cables (power + DMX XLR-cables) are available: see

our website!

SETUP MENU:

•This is the list of all the functions in the machine.

•To select any of these functions, press the MENU button and use the ▲/▼ buttons to browse the menu.

•Select the desired function with the ENTER button.

•Use ▲/▼ buttons to change the mode or value.

•Once the required mode or value is selected, press the ENTER button to select.

Level 1

Level 2

Level 3

Remarks

DMX address

000-512

Fixture

DMX Mode

STD/HSI/EXT/EASY

Run Mode

DMX/Manual/Sound/Master

Pan Invert

OFF/ON

Tilt invert

OFF/ON

No Signal

BO/Freeze

Dim Curve

Linear/S-curve/Exp1,5/Exp2,0

Sensitivity

0--99

Manual

Pan

0-255

Pan fine

0-255

Tilt

0-255

tilt fine

0-255

…

Display

Display Flip

OFF / ON

Display Mode

60s / Show

Information

Time

Current time

Total time

Error

Pan

Tilt

Zoom

Temp

Fan

Temperature

Head temp

Software version

Panel

Factory

Password

000 - 255

Password = 122

Pan

000 - 255

Tilt

000 - 255

Zoom

000 - 255

Rotate

000 - 255

Red

000 - 255

Green

000 - 255

Blue

000 - 255

White

000 - 255

Reset

All reset

Off/Reset

Factory

Off/Reset

ENGLISH

USER MANUAL

JB SYSTEMS®

5/11

INTRUDER

DMX Address

Used to set the desired DMX-address.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to select the desired DMX512 address.

•Once the correct address shows on the display, press the ENTER button to confirm.

Fixture > DMX Mode

Used to set the desired channel mode.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to select the desired mode:

•Easy: A very compact 7CH mode.

•HSI: Basic HSI controlled mode

•STD: Standard 8-bit mode

•EXT:Extended 16-bit mode

•Once the correct option shows on the display, press the ENTER button to confirm.

Fixture > Run Mode

Used to set the desired run mode.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to select the desired mode:

•DMX: enables the control through DMX.

•Manual: set the wash to a fixed position.

•Sound:activates sound controlled effects

•Master: activates master mode

•Once the correct option shows on the display, press the ENTER button to confirm.

Fixture > Pan Invert

Used to select if the PAN movements are inverted or not.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to toggle between No and Yes.

•Press the ENTER button to confirm.

Fixture > Tilt Invert

Used to select if the TILT movements are inverted or not.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to toggle between No and Yes.

•Press the ENTER button to confirm.

Fixture > No signal

Used to set how the projector reacts when the DMX-signal disappears.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to select the desired mode:

•Freeze: output based on the last valid DMX-signal is kept on the projector.

•BO: output turns black while no DMX is detected.

•Once the correct option shows on the display, press the ENTER button to confirm.

Note: as soon as the input detects a DMX-signal, blackout, freeze or audio mode will be cancelled.

ENGLISH

USER MANUAL

JB SYSTEMS®

6/11

INTRUDER

Fixture > Dim Curve

Used to set the dimmer curve of the master dimmer.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to selected the desired curve:

•Once you have the desired curve, press the ENTER button to save it.

Fixture > Sensitivity

•Used to adjust the sensitivity of the build in microphone.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use the ▼/▲ buttons to choose a value between “000” (very low sensitivity) and “100” (high sensitivity).

•Press the ENTER button to confirm the desired sensitivity.

Manual

Used to test or set all functions one by one manually.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button. A list with all the functions will appear.

•Press the ▲/▼ buttons to select the function you want to test.

•Press the ENTER button to confirm.

•Press the ▲/▼ buttons to change the value for testing.

•Press the MENU button to stop the program.

Display > Display Flip

Used to flip the display to match the fixture mounting

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to toggle between ON and OFF.

•Press the ENTER button to confirm.

Display > Display Mode

Used to set the display ON time.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the values can be changed

•Use ▲/▼ buttons to select the desired mode:

•60s: Display turns off after 60s

•Show: Display stays on

•Once the correct option shows on the display, press the ENTER button to confirm.

ENGLISH

USER MANUAL

JB SYSTEMS®

7/11

INTRUDER

Information > Time

Used to check the working hours of the fixture.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button

•Current Time: Shows the working time since power on

•Total Time: Shows the total on time

•Once the correct option shows on the display, press the ENTER button to confirm.

Information > Error

Used to check faulty sensors.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button to view if errors are present.

Information > Temperature

Used to the head temperature sensor.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button to view the head temperature.

Information > Software Version

Shows the current firmware version in the projector.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: the display shows the firmware versions of the main board

Factory

Used to adjust the factory calibration

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button

•Press the ▲/▼ buttons to enter the password:122

•Press the ENTER button to confirm

•Use the ▲/▼ buttons, to navigate, the values can now be changed

Reset > All Reset

Used to reset all the functions of the projector.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: select the All Reset option

•Off: No reset is performed

•Run: Run the reset function

Reset > Factory

Used to reset all the settings of the projector to factory settings.

•Press the MENU button to access the different functions in the menu.

•Press the ▲/▼ buttons until the desired function is showing on the display.

•Press the ENTER button: select the All Reset option

•Off: No reset is performed

•Run: reset the device

ENGLISH

USER MANUAL

JB SYSTEMS®

8/11

INTRUDER

ELECTRICAL INSTALLATION + ADDRESSING

Important: The electrical installation should be carried out by qualified personal only,

according to the regulations for electrical and mechanical safety in your country.

Electrical installation for 1 standalone unit:

•Just insert the mains cable. The unit starts working immediately in stand-alone mode.

Electrical installation for two or more units in master/slave:

In this mode the units will show a synchronized show, working to the rhythm of the beat.

•Connect 2 to maximum 16 units together using good quality balanced microphone cables. Put the first

unit in the chain in master mode (see Setup menu) and the other units as slaves (see Setup menu).

•Make sure that all units are connected to the mains.

•Done!

Electrical installation in DMX-mode:

•The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to

“daisy chain” your DMX controller and all the connected units with a good quality balanced cable.

•Both XLR-3pin and XLR-5pin connectors are used, however XLR-3pin is more popular because these

cables are compatible with balanced audio cables.

Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+)

•To prevent strange behavior of the light effects, due to interferences, you must use a 90Ω to 120Ω

terminator at the end of the chain. Never use Y-splitter cables, this simply won’t

work!

•Make sure that all units are connected to the mains.

•Each light effect in the chain needs to have its proper starting address so it knows

which commands from the controller it has to decode. In the next section you will

learn how to set the DMX addresses.

HOW TO SET THE RIGHT STARTING ADDRESS:

Refer to the setup menu to learn how to set the starting address on this unit. The starting address of each

unit is very important. Unfortunately it is impossible to tell you in this user manual which starting addresses

you have to set because this completely depends on the controller you will use, the number of fixtures and

their number of DMX channel they use.

DMX-CONFIGURATION OF THE INTRUDERIN 7, 11, 16 AND 21CH MODE:

EASY

STD

EXT

HSI

Function

Value

PAN

000-255

CH7 is set to 000-005

TILT

000-255

CH7 is set to 000-005

Dimmer (0 - 100%)

000-255

open

000-004

Normal strobe slow to fast

005-125

open

126-134

Random strobe slow to fast

135-255

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JB Systems DJ-Equipment Handbücher

JB Systems

JB Systems USB PARTYSET Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

JB Systems

JB Systems BL-B18 Bedienungsanleitung

JB Systems

JB Systems Invader Bedienungsanleitung

JB Systems

JB Systems CLUB7USB Bedienungsanleitung

JB Systems

JB Systems DELUSION Bedienungsanleitung

JB Systems

JB Systems BEAT6 Mk2 Bedienungsanleitung

JB Systems

JB Systems MULTIBEAM LASER Bedienungsanleitung

JB Systems

JB Systems USB PAR Bedienungsanleitung

JB Systems

JB Systems USB DERBY Bedienungsanleitung

JB Systems

JB Systems LED Rave Bedienungsanleitung

JB Systems

JB Systems LIVESET 2 Bedienungsanleitung

JB Systems

JB Systems Liverack-10 Bedienungsanleitung

JB Systems

JB Systems CD 100 Bedienungsanleitung

JB Systems

JB Systems PIXEL PIPE Bedienungsanleitung

JB Systems

JB Systems Sunbar Combi Bedienungsanleitung

JB Systems

JB Systems COB-4BAR Bedienungsanleitung

JB Systems

JB Systems Bubble-01 Bedienungsanleitung

JB Systems

JB Systems YETI Installationshandbuch

JB Systems

JB Systems PlanoSpot 7TC Bedienungsanleitung

JB Systems

JB Systems RAVE SPOT Bedienungsanleitung

JB Systems

JB Systems CLUBSPOT Installationshandbuch

JB Systems

JB Systems Sunbar White Bedienungsanleitung

JB Systems

JB Systems PARTY SPOT Installationshandbuch

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung