Jbc RWS-B Bedienungsanleitung

PHS Rework Adjustable Arm

Ref. RWS-B

www.jbctools.com

Packing List

The following items should be included:

Tool Arm ...................................................... 1 unit

Adapters ...................................................... 1 unit

Ref. 0017058 (for JT-TA Heater)

0017059 (for TE-TB Precision Heater)

Base .............................................................. 1 unit

Screw ........................................................... 1 unit

Ref. 0 017057

Allen key ...................................................... 1 unit

Ref. 0013609

Manual ......................................................... 1 unit

Ref. 0020498

Ref. RWS-B

PHS Rework Adjustable Arm

www.jbctools.com

IR Preheater Support

Ref. PHS-SA

to Hot Air

stations

ESD safe

connector

Ideal for working with JBC’s Hot Air stations and a Preheater, especially the PHS-KB.

Features

Hose ClampTool Holder

Turn the lever to lower the tool

Vertical axis with ruler

When you have finished

raise the tool to free up the

workspace.

Adjust the tool head holder

position according to your

work needs

www.jbctools.com

Assembly

Fit the tool arm onto the base and tighten the

screw.

Slide the adapter along the hose to the end of

the handle.

1. Setting up the Tool Arm

3. Mounting the Tool 4. Place the hose in the clamp.

2. Inserting the Adapter (JT/TE)

Adapter

Insert the tool as far as possible.

Allen key

Height Adjustment

The RWS-B Arm allows adjustment for

different heights according to your work needs

through the vertical axis rule.

Slide the tool holder to the appropriate height

and secure by tightening the lower knob to

guarantee stability. Make sure the upper knob is

loosened before sliding the tool holder.

Lower knob

Upper knob

Work Position Adjustment

The RWS-B arm allows adjustment for different positions according to your work needs.

The articulated arm covers all work areas.

Position the arm and tighten the knobs.

Top view

www.jbctools.com

Tool Holder adjustment

The Tool Holder for Rework Arm allows you to

adjust the tool head holder position to suit

your work needs.

Press the button or loosen the wheel to move

the Tool Holder.

Both axes have a ruler to carry out the task

with higher precision .

Tilting movement:

By holding down the button you can rotate the

Tool Holder up or down.

The movement allows a rotation of -40º to +40º.

You can lock or unlock the lateral rotation

mechanism by turning the fixing wheel a quarter.

The movement allows a rotation of -90º a +90º.

Rotation movement:

Button Tool head

holder

Wheel

Maintenance

- Check periodically that the RWS-B is clean,

especially the sliding parts and the shaft.

- Use a damp cloth when cleaning. Alcohol

can only be used to clean the metal parts.

- Replace any defective or damaged parts.

Use original JBC spare parts only.

- Repairs should only be performed by a

JBC authorized technical service

Keep the sliding

parts clean

It is imperative to follow safety guidelines to prevent electric shock, injury,

fire or explosions.

Safety

- Do not use the equipment for any purpose other than PCB rework. Incorrect use may cause fire.

- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight as well as persons with reduced

physical, sensory or mental capabilities or lacking experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

www.jbctools.com

Exploded View

www.jbctools.com

Notes

Inhaltsverzeichnis

Andere jbc Laborausrüstung Handbücher

jbc

jbc WSB Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

jbc RWS-B Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken