Jbc CD-9BE Leitfaden

JBC Soldering, SL.

c. Ramon y Cajal, 3 · 08750 Molins de Rei · Barcelona · SPAIN · tel. +34 933 253 200 · Fax. +34 936 804 970

[email protected]om · www.jbctools.com

PROCEDURE FOR SYSTEM ADJUSTMENT

Should users wish to verify the output temperatures of JBC Advanced Series equipment we suggest using our

TI-A Thermometer and the “Temp Adjust” mode by using the internal menu settings of the control units.

1) Turn on the station to be adjusted and

choose the working temperature in the

station.

2) Take the soldering iron and, when the

temperature is steady, apply fresh solder to

the tip of the soldering iron.

3) Clean the sensor of the thermometer from

previous flux residues if necessary.

4) Place the tip on the sensor of the

thermometer by forming an angle of 30ºC

as shown in the picture.

5) Check the solder on the tip is doing right

thermal contact to the sensor. If necessary,

add new fresh solder.

6) Wait until the temperature is steady.

7) To correct the possible error between the temperature shown by the display of the station, and the

temperature measured in the thermometer, access the “temp adjust” option, inside the “tool settings”,

in the main menu of the station.

8) Here you can modify the temperature of the tip by using the buttons of the station. For example, if you

see 350 degrees in the display, and 360 in the thermometer, you have to set -10 degrees in the “temp

adjust” option in order to adjust the tip temperature.

9) In the opposite case, if you read 350 degrees in the display, and 340 in the thermometer, you have to

set +10 degrees in the “temp adjust” option.

10) Save parameters and exit the menu.

11) Repeat from step 1 to 5 to verify.

JBC Soldering, SL.

c. Ramon y Cajal, 3 · 08750 Molins de Rei · Barcelona · SPAIN · tel. +34 933 253 200 · Fax. +34 936 804 970

[email protected]om · www.jbctools.com

DIAGRAM OF STEPS TO CALIBRATE THE TIP TEMPERATURE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc CD-9BE Leitfaden

Beliebte Lötpistole Handbücher anderer Marken