Jbc CP-2E Bedienungsanleitung

中文 48

Deutsch 32

Español 16

Compact

Micro Tweezers Station

Ref. CP-E

English 2

Page

www.jbctools.com

Packing List

The following items should be included:

Power Cord ........................................... 1 unit

Ref. 0009417 (100V/120V)

0009401 (230V)

Manual ................................................... 1 unit

Ref. 0016885

Sponge .................................................. 1 unit

Ref. S0354

Micro Tweezers ......................................... 1 unit

Ref. PA120-A

Compact

Micro Tweezers Station

Ref. CP-E

CP Control Unit ......................................... 1 unit

Ref. CP-1E (120V)

CP-2E (230V)

CP-9E (100V)

Cartridges (x2) ...................................... 1 unit

Ref. C120002

www.jbctools.com

Power Socket

Main switch

Fuse

Equipotential connectionUSB-B connector

Features

Micro Tweezers

Ref. PA120-A

Cable collector

Process Screen

Adjustable Stand:

Intelligent Heat Management

Tip Cleaner brass wool

with antisplash membrane

www.jbctools.com

Adjustable stand Cable collector (Ref. CC3702)

Adjust the tool stand to suit

your work position.

Place the cable on the collector so that the working area is free

of cable.

Tip Cleaner

Brass Wool

Ref. CL6210

Very effective cleaning

method. Leaves a

small layer of solder

on the tip preventing

oxidation between

cleaning and rewetting.

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0017576

When using the brass wool. it prevents

splashing of solder particles.

Antisplash Membrane

Ref. 0 017574

Prevents splashing and

keeps the work area clean.

Wiper

Ref. CL0160

A temperature resistant receptacle for removing

excess solder by gently tapping or wiping.

If the tip is very dirty,

JBC recommends first

cleaning it with the wiper

to remove excess solder.

Removing the splashguard:

1. Unlock the splashguard. 2. Remove it.

Lock

More cleaning options (not supplied):

Inox Wool

Ref. CL6205

Provides a superior

cleaning of the tip.

Metal Brush

Ref. CL6220

When used carefully,

it provides a more

thorough cleaning.

Sponge

Ref. S0354

The least harmful cleaning

method. Keep the sponge

damp with distilled water to

avoid tip wear.

Tapping:

Tap gently to remove excess

solder.

Wiping:

Use the slots to remove

remaining particles.

Wiper

www.jbctools.com

ø0,7 1,5mm

ø 0,2

5mm

6mm

C120-009 C120-010

2. Inserting

3. Aligning 4. Fixing

Align the tip of the cartridge.

Use a flat pliers for a correct tip alignment.

Do not over-tighten the cartridge.

Changing cartridge

To change a cartidge safely, unplug the tool or turn the station off before following these guidelines:

Loosen the screw and remove the cartridge.

Use a flat pliers if still hot.

1. Removing

Important: Tighten the screw again being

careful not to over-tighten. This is necessary

for the tool to function.

Important: Insert the cartridge as far as the

mark for a correct connection.

Mark

Alignment

Compatible cartridges

The CP station works with C120 cartridge range.

Find the model that best suits your soldering needs in www.jbctools.com

C120-004 C120-001C120-005 C120-009 C120-010

USB Connector

Download the latest software from our website to update your soldering station.

JBC Updater

www.jbctools.com/software.html

Update the station software via USB connection:

Cable USB AB JBC

Updater

JBC

Manager

JBC Manager

www.jbctools.com/manager.html

Manage and monitor as many stations as your PC can handle by using the JBC Manager.

You can export data to another PC.

Create graphs of the

soldering process in

real time showing power

and temperature data.

Manager Settings

Change settings for a

group of JBC stations at

the same time.

any JBC

station

USB

Hub

Cable

USB AB

www.jbctools.com

Power 5%

350

Selected temp

350

Sleep temp 90

Sleep

350

Tool in the stand, no heat

Hibernation

350

Operation

The JBC Exclusive Heating System

This revolutionary technology is able to recover tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, tip life increases by 5.

· Change temperature

(from 90 to 450ºC)

· Select temperature levels

· Fix one temperature

· Change Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Change Hibernation delay

(from 0 to 35 min)

Long time in

the stand

1. Work

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

2. Sleep

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

3. Hibernation

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

4 Counters

Program version

Main menu

Exit

1 Reset settings

Station settings

Tool settings

Hibernation hours 0

No tool hours 0

6 Sleep cycles

Back

5 Help text OFF

6 Beep ON

Change PIN

Plugged hours 0

Working hours 0

Sleep hours 0

Counters

Tool PA

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

Tool settings

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Metronome ----

Station settings

Fixed temp

350

Levels ºC

250 350 400

Sleep temp 90

Hibernationdelay 0 min

Temp adjust + O

Tool PA

Back

Selected temp.

350

Power 5%

-1

350

Menu Screen

The work screen provides

useful information of tool

status in real time.

Work Screen

Original PIN: 0105

Control Process

Displays a specific fixed temp.

Shown when you have

selected temperature levels.

The values must be adjusted

according to the work needs.

“Temperature Adjust” parameter.

It provides a more precise

adjustment between the selected

temp and the actual one.

www.jbctools.com

Parameters

Station Settings

Minimum temperature

Set the minimum

temperature to work with.

Min. temp. by default is

200ºC (392ºF). This is consi-

dered to be a proper starting

point for leaded applications.

Maximum temperature

Set the maximum

temperature to work with.

Max. temp by default is 400°C

(750°F). This is considered

high enough to work with

most lead-free applications.

Temperature unit

Celsius (ºC) or Fahrenheit (ºF)

Metronome

This activates a beep sound.

Frequencies vary from 1 to 50

seconds.

Help text

Activate this parameter to

receive info from the system.

Beep

Enable/disable the beep

sound of the keypad.

Change pin

Change the default security

PIN number (0105).

RecommendationsParameter description

The PIN must be entered

every time a parameter is

changed.

Useful for setting a work rate

in repetitive jobs. The beep

lets you know the length of

time the tip must be in contact

with the soldering joint.

N/a

Warnings

The station temperature

range is 90-450ºC

(190-840ºF). Change the

temperature limits when

working with less common

applications such as low / high

melting point soldering (HMP)

or plastics (e. g. riveting).

N/a

In most cases,

working with temperatures

over 400°C (750°F) can

damage the PCB and its

components. Even in short

time periods of tip contact

with the soldering joint, the

flux may not work properly

and could seriously reduce

tip life.

If the solder joint

requires more power

(e.g. multilayered or high

dissipation boards), JBC

strongly recommends using

other aids like preheaters.

Be careful when using these parameters as they may reduce the tip life if not used properly. Please

follow the recommended guidelines:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc CP-2E Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken