Jbc HDE-1B Bedienungsanleitung

Heavy Duty station

Ref. HDE-B

English 3

Page

www.jbctools.com

Deutsch 39

Español 21

中文 57

www.jbctools.com

2 3

Manual ............................. 1 unit

Ref. 0016161

Packing List

The following items should be included:

HDE Control Unit .......................................................................... 1 unit

Ref. HDE-1B (120V)

HDE-2B (230V)

HDE-9B (100V)

Stand ................ 1 unit

Ref. HD-SD

HD Purpose Handle ....... 1 u.

Ref. T470-A

Heavy Duty station

Ref. HDE-B

Stand Cable ................. 1 unit

Ref. 0011283

Tip Cleaner ................... 1 unit

Ref. CL9885

Sponge ............................ 1 unit

Ref. S0354

Power Cord ................... 1 unit

Ref. 0010569 (230V)

0013671 (100/120V)

ww w. jb ctool s.co m

www.jbctools.com

Features

USB-A connector

Tilt the display for

easy reading

2.8” Color TFT screen

Use this foot switch to enable/disable a module or make the tool enter/exit Sleep mode.

If you do not have a module, you can link up the P-305 Pedal Kit to the tool port.

4 5

Stand

Ref. HD-SD

HDE Control Unit

RJ12 connector

for Robot system

Peripheral connector

for joining modules

and pedals

USB-B

connector

Equipotential

connection

Power Socket

HD Purpose

Handle

Ref. T470-A

C470 cartridges

Required but not

supplied

Stand cable

Ref. 0011283

Peripherals

Join the station port with 1 module and 1 pedal. See the compatible peripherals below:

Fume Extractor Switch

Ref. FSE-A

Nitrogen Flow Regulator

Ref. MNE-A

Pedal

Ref. P-005

www.jbctools.com

6 7

Cable collector

Keeps working area free of cable.

Quick tip changer

The cartridge extractor / inserter system

permits switching cartridges without

interrupting your work.

Adjustable tool holder

Suits your work position.

Adjustable cable collector

Adjustable Stand

Improve thermal transfer by cleaning the tip after each solder joint.

Tip Cleaner

Optional

Brass Wool

Ref. CL6210

Inox Wool

Ref. CL6205

Metal Brush

Ref. CL6220

Tip-Tinner

Ref. TT-A

Sand

Ref. CL6211

Splashguard

Non-slip base

Sponge

Ref. S0354

Wiper

Ref. CL0236

Very effective cleaning method.

It leaves a small layer of

solder on the tip to

prevent oxidation

between cleaning

and rewetting.

It prevents splashing

of solder particles

when using the brass

wool.

Heavy weighted non-

slip base for simple-

handed cleaning.

The least harmful cleaning

method. Keep the sponge damp

with distilled water when working

to avoid tip wear.

A temperature resistant receptacle lets

the operator remove excess solder by

gently tapping or wiping.

Tapping: Wiping:

Tap gently to remove

excess solder.

Use the slots to

remove remaining

particles.

www.jbctools.com

Nitrogen feed

8 9

*Mark

Loosen the screw. Place the Soldering Iron

in the extractor and remove the cartridge.

Insert the cartridge and press slightly to

the mark*.

Once the cartridge is properly inserted we recommend tightening the screw to prevent it turning.

Important: It is essential to insert the cartridges as far as the mark for a proper connection.

Changing Cartridges

Compatible cartridges

The HDE works with T470 handles and C470 cartridges. Find the model that best suits your

soldering needs in www.jbctools.com

Round Chisel Round bent Bevel Special models

1. Removing 2. Inserting

3. Fixing

Screw

T470 Handles for Heavy Duty

Use C470 Cartridge range

For intensive soldering jobs requiring continued high thermal power. They feature a non-slip-grip with

a good thermal insulation and a screw which ﬁxes the cartridge and prevents rotation.

Note: All models are supplied with a 1.5m cable except those speciﬁed with 3m.

Only used with two

HDE-B control units

and a HDT-SD stand.

Compatible Tools

Foam

Tri-lobed HD Handle

Ref. T470-ZA

HD Purpose Handle HD Purpose Handle with 3m cable

Ref. T470-A Ref. T470-SA

Thermal Insulator HD Handle Thermal Insulator HD Handle with 3m cable

Ref. T470-FA Ref. T470-MA

Nitrogen HD Handle

Ref. T470-NA

Nozzles

Ref. B6193

B6194

B6195

HD Thermal Tweezers

Ref. HT470-A

The MNE Nitrogen

Flow Regulator

is required.

Only used with a

DN-SE stand.

For better

handling

of the tool.

380ºC

Port

Power

45%

Selected 380ºC

T470

17:14

Sleep

Port

Tool in the stand

17:14

Actual Temp. 180ºC

T470

Delay to hibernation: 29:30

Port

Actual Temp. 25ºC

17:14

T470

Hibernation

380ºC

Port

Power

45%

Temp. Levels

T470

250 380 400

17:14

www.jbctools.com

10 11

3. Hibernation

Operation

The JBC Exclusive Heating System

This revolutionary technology is able to recover tip temperature extremely quickly. It allows the user

to work at a lower temperature and improve the quality of soldering. The tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

1. Work 2. Sleep

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Tools Menu:

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

Tools Menu: Tools Menu:

Long time in

the stand

· Set temperature limits

· Select temperature levels

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)Menu Options

Station

Information

Power

indicator

Tool

in use

Work Screen

Status bar

The HDE offers an intuitive user interface which provides quick access to station parameters.

Change

port

Displayed if

temperature

levels are

activated

Station Tools Counters

ResetGraphicsPeripherals

Press INFO for each parameter description.

Port 1 - T470

450

400

350

300

250

150

100

200

Power Temp

17:14

www.jbctools.com

12 13

Soldering Net

Remotely manage and monitor as many stations as your Windows PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later uses.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

JBC

Manager

software

any JBC

station

USB Hub

By pressing Graphics in the main MENU, temperature and power ﬁgures in real

time are displayed for each port. This helps you decide which tip to use to obtain

the best quality solder joints.

Process analysis

Export graphics

Insert a USB ﬂash drive into the USB-A

connector to save your soldering process in

csv format.

Graphics

Temperature

Power (%)

See other

port graphic

www.jbctools.com

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

14 15

Clean periodically

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth.

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and return to the station.

- Use a damp cloth to clean the casing and

the tool. Alcohol can only be used to clean

the metal parts.

- Periodically check that the metal parts of

the tool and stand are clean so that the

station can detect the tool status.

Fuse holder

- Maintain tip surface clean and tinned prior

to storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat

transfer to the solder joint.

- Periodically check all cables and tubes.

Fuse

1. Connect the tool to the station port by means of the CHB-A converter.

2. Connect your Robot system to the Robot connector (RJ12) of the station.

DB9-RJ12 Adapater available only if necessary (Ref. 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the

website www.jbctools.com/jbcsoftware-menu-115.html.

Manage and monitor the station using a Robotic system.

Working with Robots

HDE

Control Unit

Robot

Update the station software

1. Download the JBC Update file from

www.jbctools.com/software.html and save

it on a USB flash drive. Preferably one with

no other files.

JBC

Update file

Converter

Ref. CHB-A

2. Insert the USB ﬂash drive.

The icon is diplayed while updating.

RS-232

connection

www.jbctools.com

16 17

HDE-1B 120V 50/60Hz. Input fuse: 4A. Output: 47V

HDE-2B 230V 50/60Hz. Input fuse: 2A. Output: 47V

HDE-9B 100V 50/60Hz. Input fuse: 4A. Output: 47V

- Weight: 6 Kg (13.3 lb)

- Dimensions: 145 x 120 x 225mm

- Output Peak Power: 250W

- Temperature Range: 90-500 ºC (190-932 ºF)

- Idle Temp. Stability (still air) ±1.5 ºC (±3 ºF)

- Tip to ground resistance: <2 ohms

- Tip to ground voltage: <2mV RMS

- Ambient Operating Temperature: 10-40 ºC (50-104 ºF)

- USB-A / USB-B / Peripherals connectors

- RJ12 connector for Robot

Complies with CE standards

ESD protected housing “skin effect”

SpecificationsSafety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

www.jbctools.com

18 19

Estación de alta potencia

Ref. HDE-B

Andere Handbücher für HDE-1B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc HDE-1B Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken