Jbc B-IRON 210 DUAL Bedienungsanleitung

INSTRUCTION MANUAL

Battery-Powered Soldering Station

B·IRON 210 DUAL

Packing List

The following items are included:

B115 and B210 Charging Base .............. 1 unit

Ref. 0032436

Precision Handle for B·IRON ........... 2 units

Ref. B210-C

Includes Safety Cap for B115/B210 Handles (ref. 0031596)

Portable Display 7” for B·IRON ............. 1 unit

Ref. PDS-B

C210 Cartridge ........................................... 2 units

Ref. C210001 (tip ø 0.3 mm)

This manual corresponds to the following references:

BISS-5A

* according to purchased station model, suitable for:

120V - N. America / Taiwan

230V - India / Europe / United Kingdom

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Brass Wool for B·IRON ............................. 1 unit

Ref. CL0300

Already assembled in the stand

Power Cord * ................................................. 1 unit

Ref. 0027380 120V - N. America, Taiwan

0027381 230V - India

0027382 230V - Europe

0027378 230V - United Kingdom

Manual ............................................................. 1 unit

Ref. 0030315

USB Cable (USB A to USB C) ................. 1 unit

Ref. 0028092

Holder for Portable Display

5” to 7” ............................................................. 1 unit

Ref. 0030723

Includes fixing knob

* Included according to purchased station model.

Features and Connections

B115 / B210 Charging Base

CL0301

Wiper

for B·IRON

Cartridge Exchanger

CL0300

Brass Wool

for B·IRON

(inside)

Adjustable Tool Holder

and Charger

Cartridge Holder

Antisplash Membrane

Adjustable Tool Holder

and Charger

PDS

Portable Display 7”

for B·IRON

Please read this manual and its safety guidelines thoroughly before using the product.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Features and Connections

B210

Precision Handle

for B·IRON

Power Socket

USB Connector

USB Cable

Ref. 0028092

B210

Precision Handle

for B·IRON

C210

Cartridge

Range

Bluetooth

Connection

Safety Cap

Holder

C210

Cartridge

Range

Bluetooth

Connection

Display Support

Holder for Portable

Display 5” to 7”

Ref. 0030723

Safety Cap for

B115/B210 Handles

Ref. 0031596

Safety Cap for

B115/B210 Handles

Ref. 0031596

PDS

Portable Display 7”

for B·IRON

Insert the ﬁxing knob (3) and tighten it just enough

so that it stays in its place but the display holder

can be moved.

Quick Start

Connect the charging base to the mains (4).

If needed, the display can be connected to the

USB port (5) with the provided USB cable to keep

it charging while working.

4. Base Connection / Display Connection3. Display Placing

Insert the thin end of the display holder into the

upper area of the rear rail of the charging base

(1). Then carefully rotate the display holder 90

degrees (2) until it stands vertical.

1. Display Holder Assembling

Place the display on the support with its buttons

facing upwards and adjust the height of the

display holder.

Once the display holder is at the right height,

tighten the fixing knob completely to fix the

display in place.

Buttons

Tablet

Holder

Support Connector

for Display

2. Display Holder Setting

5. Turning on the Portable Display

Turn on the display by holding

down the power button and then

open the B·IRON app*:

6. Tool Holder Angle Adjustment

Adjust the tool holder angle by simply rotating

it forward or backward (1) to the desired

working position (2). Tool holders have 7

different positions, each varying by an angle

of 10 degrees.

Do not rotate the tool holder with a tool

resting on it.

* Note: The app can also be downloaded to your

own devices. To know how, see section “Installing

and Updating the B·IRON App”.

Power Button

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

7. Cartridge Insertion and Charging

Place the tool over a cartridge

and press the tool down to insert

the cartridge (1). To release the

tool with the cartridge from the

extractor, lift the tool upward (2).

Make sure that the cartridge is

appropriately inserted* into the

tool by gently pressing the tip

against the holes on the sides

of the cartridge exchanger (3).

*Important: Cartridges must

be inserted up to the mark for

a proper connection.

Place the tool on the tool holder

(4) to charge it. A beep will

sound to conﬁrm that the tool

is properly placed and charging.

The sound can be turned up,

down or off using the buttons

on the display.

Note: Charge the tool

completely before using it

for the first time. It will take

aprox. 60min for B210, aprox.

30min for B115 and aprox. 40

min for BP115.

For more information on how to change cartridges and the use of the cartridge exchanger, see section

“Cartridge Exchanger and Cartridge Holder”.

Inserting Fixing Charging

Mark

ø 1

ø 1,5

ø 3,5

B210 Handle works with C210 Cartridges. Find the model that best suits your soldering needs at

www.jbctools.com

Conical Chisel Conical

Bent

Bevel

Compatible Cartridges

Tool

28174

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

WORK

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

80%

JBC

210

350ºC

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

JBC#1

Tool1

2822

Tool ID

Hibernation delay

Temperature units

00:30

Maximum Temperature

400ºC

Sleep mode

Sleep temperature

150ºC

Working

Low battery

Power OFF

Charging

No cartridge

Tool Status

ºC

ºF

JBC

210

Lock Parameters

Locked

Unlocked

Return to Work

Tool1

Tool ID

28714

Hardware

Software

0028283

X886787

Update File

File

Hardware

Software

Select your Firmware

Update

JBC

210

Return to Work

JBC#1

Bi115

Bi210

User’s Manual

Documents

JBC#1

JBC

210

Return to Work

2822

Work

Settings

Counters

Update

Documents

Light Theme

Dark Theme

Disconnect

JBC#1

Update

Tool

JBC#1

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

WORK

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

80%

JBC

210

350ºC

Tool1

Tool1 Tool2

Tool3

Tool

24 W

18 W

12 W

6 W

0 W

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

80%

350ºC

JBC#1

348ºC

6 W

Status Lightband

Safety Cap

Safety Cap and Cap Holder

Cap Holders

Status Lightband Detail

8. Tool Selection

Screw

The status lightband indicates as follows the

tool status:

green working/soldering

tool fully charged

green blinking charging

alternating

red/green blinking

low battery,

less than 20%

red blinking no cartridge

blue blink every few

seconds

the cap is on

and the tool is

disconnected

no color power off

Thanks to the safety cap for B210 and B115

handles, tools can be safely transported even

with a cartridge inserted.

When the cap is placed onto the tool, the

cartridge stops heating immediately, data

transfer is cut off and the tool is disconnected

from the station. It turns off completely after 10

minutes of inactivity. This allows a greater saving

of the tool’s battery.

The stand has a holder for two safety caps on

the back. This component can be detached by

loosening and removing the screw between the

two holders (1).

While the tool is being used, the cap can be

stored on the cap holder.

Select the tool from the device list. If the tool is

not displayed on screen, make sure that the cap

is off and the tool has some battery. Try scanning

again by tapping Scan (6) on the display.

To add a second tool to the station once the ﬁrst

one is connected, go to the main menu (7) and

tap Add device. Select your second tool from

the device list.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Tool

28174

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

WORK

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

80%

JBC

210

350ºC

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

JBC#1

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

80%

350ºC

JBC#1

Tool1

Tool ID

28714

Hardware

Software

0028283

X886787

Update File

File

Hardware

Software

Select your Firmware

Update

JBC

210

Return to Work

JBC#1

Bi115

Bi210

User’s Manual

Documents

JBC#1

JBC

210

Return to Work

2822

Work

Settings

Counters

Update

Documents

Light Theme

Dark Theme

Disconnect

Tool

28174

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

Work

Settings

Counters

Update

Documents

Light Theme

Dark Theme

Disconnect

JBC#1

348ºC

6 W

Tool1 Tool2 Tool3

Work

JBC#1

Tool1

2822

Tool ID

Hibernation delay (seconds)

00:30

Sleep mode

Sleep temperature

150ºC

Minimum Temperature

100ºC

Maximum Temperature

400ºC

Working

Low battery

Power OFF

Charging

No cartridge

Tool Status

Temperature units

ºC

ºF

JBC

210

Lock Parameters

Locked

Unlocked

Work

JBC#1

2822

Tool ID

Hibernation delay (seconds)

Sleep mode

Sleep temperature

150ºC

Minimum Temperature

100ºC

Maximum Temperature

400ºC

Working

Low battery

Power OFF

Charging

No cartridge

Tool Status

Temperature units

ºC

ºF

JBC

210

Lock Parameters

Locked

Unlocked

Work

JBC#1

Tool1

2822

Tool ID

Hibernation delay (seconds)

00:30

Sleep mode

Sleep temperature

150ºC

Minimum Temperature

100ºC

Maximum Temperature

400ºC

Working

Low battery

Power OFF

Charging

No cartridge

Tool Status

Temperature units

ºC

ºF

JBC

210

Lock Parameters

Locked

Unlocked

Work

Enter PIN

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

80%

Work

Settings

Counters

Update

Documents

Light Theme

Dark Theme

Add device

Disconnect

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

80%

350ºC

Devices

Documents

Light Theme

Dark Theme

Tool

28174

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

WORK

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

80%

JBC

210

350ºC

Tool

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

348ºC

5,7 W

80%

350ºC

JBC#1

Tool1

2822

Tool ID

Hibernation delay

Temperature units

00:30

Maximum Temperature

400ºC

Sleep mode

Sleep temperature

150ºC

Working

Low battery

Power OFF

Charging

No cartridge

Tool Status

ºC

ºF

JBC

210

Lock Parameters

Locked

Unlocked

Return to Work

Tool1

Tool ID

28714

Hardware

Software

0028283

X886787

Update File

File

Hardware

Software

Select your Firmware

Update

JBC

210

Return to Work

JBC#1

Bi115

Bi210

User’s Manual

Documents

JBC#1

JBC

210

Return to Work

2822

Work

Settings

Counters

Update

Documents

Light Theme

Dark Theme

Disconnect

JBC#1

Update

Tool

JBC#1

24 W

100%

18 W

100%

12 W

100%

6 W

100%

0 W

100%

10 seconds/div

V1.2

WORK

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

80%

JBC

210

350ºC

Tool1

Tool1 Tool1 Tool2 Tool3

Tool

24 W

18 W

12 W

6 W

0 W

10 seconds/div

V1.2

CHARGE

450 ºC

350 ºC

250 ºC

150 ºC

50 ºC

JBC

210

80%

350ºC

JBC#1

348ºC

6 W

Operation

The JBC Most Efficient Soldering System

This revolutionary technology can recover tip temperature extremely quickly. This allows the user to

work at a lower temperature.

Inactive

5 mins.

Tool Power Switch

Work Charge Mode

When the tool is lifted from

the tool holder, the tip of the

assembled cartridge will heat

up to the selected working

temperature.

While the tool remains on the

tool holder, it charges and the

tip will gradually cool down to

room temperature.

Hibernation Mode

When the tool is away from

the tool holder and remains

inactive (no movement for at

least 10 seconds), the tool goes

into Hibernation Mode and the

tip temperature gradually cools

down to room temperature.

After automatically turning

off, put the tool back on the

tool holder to turn it on again.

If the tool has been inactive for

a longer period of time (at least

5 minutes), it automatically

turns off.

Automatic Turn Off Turning the Tool Back On

Sleep Mode

If Sleep Mode is activated

(see section “Settings”), upon

placing the tool on its holder,

besides charging it enters Sleep

Mode. The tip temperature will

drop down and remain at Sleep

temperature.

Note: The tool can also be switched off/on manually. Tap the

Tool power switch on the display (bottom right) to switch it off/

on (if the tool is turned off, it will remain connected up to 5

minutes to the station but will not heat up the cartridge).

Inactive

10 secs.

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc B-IRON 210 DUAL Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken