jbc AT420-A Bedienungsanleitung
Adjustable Tweezers
Ref. AT420-A
www.jbctools.com
2
C420 Cartridges
(Required but not supplied)
Control Unit
Stand
Ref. AT-SA
Manual ................................................ 1 unit
Ref. 0022048
Packing List
The following items should be included:
Adjustable Tweezers ............................. 1 unit
Ref. AT420-A
Adjustable Tweezers
Ref. AT420-A
Adjustable Tweezers
Ref. AT420-A
Features
www.jbctools.com
(Push this way to close the tweezers) (Push this way to open the tweezers)
Normally open mode
Slide the knobs to switch
between modes
Normally closed mode
Upper sliding
knob
www.jbctools.com
3
1. Inserting
3. Rotational and Vertical Cartridge alignment
Changing cartridges
Unlock the fixing knobs and remove the
cartridges by using the cartridge extractor of
the stand (Ref. AT-SA).
2. Removing
Insert the cartridges as far as the mark
for a proper connection. Before inserting,
make sure the cartridges are clean to
ensure the proper functioning of the tool.
Mark
Slightly turn the wheels to align the cartridges
as required.
Once the alignment has been made, do not forget to fix the cartridges by tightening the fixing
knobs. A single turn of the knob is required to get them fixed.
!
The rear wheel guarantees that the
cartridges are equally aligned with vertical
symmetry when closing the tweezers.
Working Mode
Choose between a normally open and normally closed mode depending on the job to be done:
Consult our wide range of cartridges with more than 250 references on www.jbctools.com.
For Special Cartridges contact with our distributor.
C420 Cartridge Range
Chip Components
Dual in line
QFP y PLCC Blade Type
Cable stripper
12
15,6
14,3
2
Special Cartridges Special Cartridges
A
A
A
A
A
C420-282C420-281
C420-271 A = 1,5 mm
C420-272 A = 2,6 mm
C420-273 A = 4 mm
C420-274 A = 6 mm
C420-275 A = 8 mm
C420-276 A = 10 mm
C420-277 A = 15 mm
C420-278 A = 20 mm
C420-285 A = 22 mm
C420-279 A = 8 mm
C420-280 A = 11 mm
C420-283 A = 50 mm
C420-281 C420-282
A = 12 mm
B= 15,6 mm
C= 14,3 mm
2 mm
4
www.jbctools.com
5
Notes
6
www.jbctools.com
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
Specifications
0 0 2 2 0 4 8 -1218
- Weight: 110 g (0.2 lb)
- Max. power per cartridge: 80W
Complies with CE standards
ESD Safe
www.jbctools.com
Inhaltsverzeichnis
Andere jbc Werkzeuge Handbücher
jbc
jbc TM50 Bedienungsanleitung
jbc
jbc C115 Bedienungsanleitung
jbc
jbc GALE Bedienungsanleitung
jbc
jbc ALE250 Bedienungsanleitung
jbc
jbc CLU7 Bedienungsanleitung
jbc
jbc N4473 Bedienungsanleitung
jbc
jbc AM120 Bedienungsanleitung
jbc
jbc RHS-A Bedienungsanleitung
jbc
jbc AMS Bedienungsanleitung
jbc
jbc HT470K Bedienungsanleitung
jbc
jbc PH217 Bedienungsanleitung
jbc
jbc JT-T1A Bedienungsanleitung
jbc
jbc TMSK Bedienungsanleitung
jbc
jbc GAL0405 Bedienungsanleitung
jbc
jbc JTSE-1A Bedienungsanleitung
jbc
jbc WS140 Bedienungsanleitung
jbc
jbc CL2466 Bedienungsanleitung
jbc
jbc H0511 Bedienungsanleitung
jbc
jbc ADVANCED MS 9000 Bedienungsanleitung
jbc
jbc AN115 Bedienungsanleitung
