jbc HT470K Bedienungsanleitung
HT470K
Heavy Duty Tweezers Kit
INSTRUCTION MANUAL
2
Stand for HT470
Heavy Duty Thermal Tweezers ..............1 unit
Ref. HDT-SE
Stand Cable 1m ......... 2 units
Ref. 0024227
Cable Flange .................1 unit
Ref. 0024028
Manual..............................1 unit
Ref: 0028447
Heavy Duty
Thermal Tweezers .................................... 1 unit
Re f. H T470 -A
The following items are included:
This manual corresponds to the following reference:
KHT470A
Packing List
3
Termal Tweezers
Re f. H T470 -A
C470 Cartridges
(not included)
Stand
Ref. HDT-SE
Control Unit
(not included)
Features
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
HT-SE
HT 420-A
HT 420-A
HT-SE
HT 420-A
HT 420-A
HT-SE
HT 420-A
HT 420-A
HT-SE
HT 420-A
HT 420-A
4
HT470-A Changing cartridges
2. Removing1. Unlocking
Place the cartridges in the extractor and pull
the tweezers to remove them.
Unlock the fixing screws.
3. Inserting 4. Locking
Use the grooves to insert the cartridges as far
as the mark*.
Lock the fixing screws.
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
Mark
HT-SE
HT 420-A
HT 420-A
DR-SE
DS-SE
DS360-A
HT-SE
HT 420-A
HT 420-A
5
Adjustable Stand
Cable Flange
Ref. 0024028
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
6
Clean periodically
Maintenance
Before carrying out maintenance or storage, always
unplug the stand from the station and the tool.
- Use a damp cloth to clean the stand.
Alcohol can be used only when cleaning
the metal parts.
- Check periodically that the metal parts of
the tool/stand are clean so that the station
can check the tool’s status.
- Periodically check all cables and tube
connections.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a
JBC authorized technical service.
7
Safety
- Do not use the stand for any other purpose than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Specifications
HT470K
Heavy Duty Tweezers Kit
Ref. KHT470A
Ref. HDT-SE
- Includes Sleep Mode, Hibernation Mode
Ref.: HT470 -A
- Cable Lenght: 1.3 m
- Total Net Weight: 1.67 kg / 3.68 lb
- Total Package Dimension / Weight: 440 x 210 x 220 / 2.51 kg
(L x H x W) 17.32 x 8.27 x 8.66 / 5.53 lb
Complies with CE standards
ESD safe
0 0 2 8 4 47-12 2 1
Inhaltsverzeichnis
Andere jbc Werkzeuge Handbücher
jbc
jbc FAE040 Bedienungsanleitung
jbc
jbc SADS Bedienungsanleitung
jbc
jbc PSN Bedienungsanleitung
jbc
jbc DSH Bedienungsanleitung
jbc
jbc WS440 Bedienungsanleitung
jbc
jbc PH217 Bedienungsanleitung
jbc
jbc T260 Bedienungsanleitung
jbc
jbc CL0300 Bedienungsanleitung
jbc
jbc PA120 Bedienungsanleitung
jbc
jbc AN115 Bedienungsanleitung
jbc
jbc TMSK Bedienungsanleitung
jbc
jbc HRL Bedienungsanleitung
jbc
jbc FAE070 Bedienungsanleitung
jbc
jbc TMSK Bedienungsanleitung
jbc
jbc TM10 Bedienungsanleitung
jbc
jbc PA120-A Bedienungsanleitung
jbc
jbc JNA Series Bedienungsanleitung
jbc
jbc NA101 Bedienungsanleitung
jbc
jbc NT115 Bedienungsanleitung
jbc
jbc RHS-A Bedienungsanleitung
