jbc NH Bedienungsanleitung
NH
High-Presicion Heater Hose Set
for JNA
INSTRUCTION MANUAL
High Precision Heater Hose Set ........... 1 unit Manual .......................................................... 1 unit
Ref. 0026662
Packing List
The following items are included:
This manual corresponds to the following references:
NH-A
High Precision
Heater Hose Set
Ref. NH-A
Features and Connections
Cartridge
Ref. J125010 / J125015
(not included)
JNAU
Control Unit
(not inluded)
2
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
17:14
20ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. te mp
NH-A
NH-A
NH-A
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAE
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
17:14
20ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. te mp
NH-A
NH-A
NH-A
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAE
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
17:14
20ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. te mp
NH-A
NH-A
NH-A
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAE
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Quick Tip Changer
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
1. Removing 2. Inserting 3. Fixing
Place the cartridge in the
extractor and pull the handle
to remove the cartridge.
Place the handpiece on top of
the new Cartridge and press
down slightly.
Use the holes to push and
fix the cartridge in its final
position.
Save time and change cartridges safely without switching the station off.
Mark
www.jbctools.com
3
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
17:14
20ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. temp
NH-A
NH-A
NH-A
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAE
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
17:14
20ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. temp
NH-A
NH-A
NH-A
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAE
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
17:14
20ºC
Power
45% 120ºC Selected
TC
Temp .
4m 38s
400 ºC 80%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240 ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Prole ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Temp
17:14
Ext. temp
NH-A
NH-A
NH-A
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAE
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Soft foam grips ensure a better manual control of the tool and greater comfort when working.
Easily replace the grips using the slip-on tabs.
Insert the slide-on tabs into the
new grip.
Push the grip with the tabs
onto the handle.
Hold the grip and pull them
out. Use a pliers if necessary.
1. Inserting Tabs 2. Inserting Handle 3. Removing Tabs
Compatible Cartridges (Not included)
The JNA High Precision Hot Air Station works with J125 Cartridges and NH High Precision Heater
Hose Set.
Find the model that best suits your soldering needs in www.jbctools.com
J125010 J125015
Ø 1.0 mm Ø 1.5 mm
Grips for NH High Precision Heater Hose Set (Ref. 0024473)
Compatible Accessories (Not included)
4
AD-SE (T210 & T245)
AM-SA (AM120 & PA120)
AL-SF
NA-SA
AT-SA
SF-SE
Maintenance
Before carrying out maintenance or storage,
always unplug the stand from the station and
the tool.
- Use a damp cloth to clean the stand.
Alcohol can be used only when cleaning
the metal parts.
- Check periodically that the metal parts of
the tool/stand are clean so that the station
can check the tool’s status.
- Periodically check all cables and tube
connections.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a
JBC authorized technical service.
Clean
periodically
www.jbctools.com
5
Safety
- Do not use the stands for any purpose other than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- The tool should be placed in the stand when is not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
6
Notes
www.jbctools.com
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
www.jbctools.com
0026662-0321
NH-A
- Net Weight 0.31 kg / 0.69 lb
- Total Package Dimensions/Weight: 382 x 159 x 81 mm / 0.45 kg
(L x W x H) 13.46 x 6.10 x 4.72 in / 0.98 lb
Complies with CE standards
ESD protected
Specifications
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere jbc Werkzeuge Handbücher
jbc
jbc GALE Bedienungsanleitung
jbc
jbc FAE020 Bedienungsanleitung
jbc
jbc T260 Bedienungsanleitung
jbc
jbc WS140 Bedienungsanleitung
jbc
jbc CLU7 Bedienungsanleitung
jbc
jbc TM10 Bedienungsanleitung
jbc
jbc HT470K Bedienungsanleitung
jbc
jbc PSM Bedienungsanleitung
jbc
jbc NA101 Bedienungsanleitung
jbc
jbc AT420-A Bedienungsanleitung
jbc
jbc RHS-A Bedienungsanleitung
jbc
jbc HT420 Bedienungsanleitung
jbc
jbc jbs-600 Bedienungsanleitung
jbc
jbc PSN Bedienungsanleitung
jbc
jbc FAE070 Bedienungsanleitung
jbc
jbc TM50 Bedienungsanleitung
jbc
jbc AN115 Bedienungsanleitung
jbc
jbc N4473 Bedienungsanleitung
jbc
jbc PA120-B Bedienungsanleitung
jbc
jbc SF280 Bedienungsanleitung
