Jenn-Air JCD2295KEP Bedienungsanleitung

TABLE OF CONTENTS

Form No. C/11/04 Part No. 12842108 www.jennair.com Printed in U.S.A.

Important Safety Instructions ........................................1-2

Installation.............................................................................3-9

Temperature Controls...................................................10-12

Fresh Food Features .....................................................13-15

Freezer Features ...................................................................16

Ice and Water ..................................................................17-19

Water Filter.......................................................................20-22

Food Storage Tips..........................................................23-25

Care and Cleaning ........................................................26-29

Operating Sounds ................................................................30

Troubleshooting..............................................................31-35

Warranty and Service..........................................................37

Guide d’utilisateur et d’entretien....................................38

Guía de Uso y Cuidado......................................................76

JENN-AIR SIDE-BY-SIDE REFRIGERATOR

USE & CARE

GUIDE

IMPORTANT SAFETY INSTRUCTIONS

WARNING – Hazards or unsafe practices which

COULD result in severe personal injury or death.

WARNING

DANGER – Immediate hazards which WILL result

in severe personal injury or death.

DANGER

CAUTION – Hazards or unsafe practices which COULD

result in minor personal injury or property damage.

CAUTION

What You Need to Know About

Safety Instructions

Warning and Important Safety Instructions appearing in

this guide are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining or operating appliance.

Always contact the manufacturer about problems or

conditions you do not understand.

Recognize Safety Symbols, Words,

Labels

Installer: Please leave this guide with this appliance.

Consumer: Please read and keep this Use & Care

Guide for future reference. This guide provides

proper use and maintenance information.

Keep sales receipt and/or cancelled check as proof

of purchase.

Call: 1-800-JENNAIR (1-800-536-6247)

U.S.A. and Canada

Have complete model and serial number

identification of your refrigerator. This is located on a

data plate inside the refrigerator compartment, on

the upper left side. Record these numbers below for

easy access.

Model Number _______________________________

Serial Number ________________________________

Date of Purchase______________________________

In our continuing effort to improve the quality and

performance of our appliances, it may be necessary

to make changes to the appliance without revising

this guide.

This appliance is equipped with a three-prong

grounding plug for your protection against possible

electrical shock hazards. It must be plugged into a

grounding receptacle. Where a standard two-prong

wall receptacle is encountered, it is the personal

responsibility and obligation of the customer to have it

replaced with a properly grounded three-prong wall

receptacle. Do not under any circumstances, cut or

remove the third (ground) prong from the power cord.

Do not use an adapter plug.

Power supply cord with

three-prong grounding plug

Grounding type

wall receptacle

To reduce risk of injury or death, follow basic

precautions, including the following:

IMPORTANT: Child entrapment and suffocation

are not problems of the past. Junked or abandoned

refrigerators are still dangerous – even if they sit out

for “just a few days.” If you are getting rid of your old

refrigerator, please follow the instructions below to

help prevent accidents.

Before you throw away your old

refrigerator or freezer:

•Take off the doors.

•Leave the shelves in place so

children may not easily climb

inside.

DANGER

IMPORTANT SAFETY INSTRUCTIONS

To reduce risk of fire, electric shock, serious injury or

death when using your refrigerator, follow these basic

precautions, including the following:

1. Read all instructions before using the refrigerator.

2. Observe all local codes and ordinances.

3. Be sure to follow grounding instructions.

4. Check with a qualified electrician if you are not

sure this appliance is properly grounded.

5. Do not ground to a gas line.

6. Do not ground to a cold-water pipe.

7. Refrigerator is designed to operate on a separate

115 volt, 15 amp., 60 cycle line.

8. Do not modify plug on power cord. If plug does

not fit electrical outlet, have proper outlet installed

by a qualified electrician.

9. Do not use a two-prong adapter, extension cord

or power strip.

10. Do not remove warning tag from power cord.

11. Do not tamper with refrigerator controls.

12. Do not service or replace any part of refrigerator

unless specifically recommended in Use & Care

Guide or published user-repair instructions. Do

not attempt service if instructions are not under-

stood or if they are beyond personal skill level.

13. Always disconnect refrigerator from electrical

supply before attempting any service. Disconnect

power cord by grasping the plug, not the cord.

14. Install refrigerator according to Installation

Instructions. All connections for water, electrical

power and grounding must comply with local

codes and be made by licensed personnel when

required.

15. Keep your refrigerator in good condition. Bumping

or dropping refrigerator can damage refrigerator

or cause refrigerator to malfunction or leak. If

damage occurs, have refrigerator checked by

qualified service technician.

16. Replace worn power cords and/or loose plugs.

17. Always read and follow manufacturer’s storage

and ideal environment instructions for items being

stored in refrigerator.

18. Your refrigerator should not be operated in the

presence of explosive fumes.

19. Children should not climb, hang or stand on any

part of the refrigerator.

20. Clean up spills or water leakage associated with

water installation.

WARNING

SAVE THESE INSTRUCTIONS

INSTALLATION

Location

•Do not install refrigerator near oven, radiator or other

heat source. If not possible, shield refrigerator with

cabinet material.

•Do not install where temperature falls below 55° F

(13° C) or rises above 110° F (43° C). Malfunction

may occur at this temperature.

•Refrigerator is designed for indoor household

application only.

Measuring the Opening

When installing your refrigerator, allow 1⁄2” space at top

and 1⁄2” space behind machine compartment cover

(located in the rear) for proper air circulation. If the

refrigerator is placed with the door hinge side against

a wall, you may want to allow additional space so the

door can be opened wider.

Subflooring or floor coverings (i.e. carpet, tile, wood

floors, rugs) may make your opening smaller than

anticipated.

Some clearance may be gained by using the leveling

procedure under Leveling.

IMPORTANT: If refrigerator is to be installed into a

recess where the top of the refrigerator is completely

covered, use dimensions from floor to top of hinge cap

to verify proper clearance.

Transporting Your Refrigerator

•NEVER transport refrigerator on its side. If an

upright position is not possible, lay refrigerator on its

back. Allow refrigerator to sit upright for

approximately 30 minutes before plugging it in to

assure oil returns to the compressor. Plugging

refrigerator in immediately may cause damage to

internal parts.

Glass Panel Doors (select models)

To avoid possible injury, product or property damage,

observe the following:

•When working directly on the doors, protect the

door corners and sides by placing doors on a

nonabrasive surface protected by towels or rugs.

•Protect the glass panel sides when securing the

unit to a dolly. DO NOT OVERTIGHTEN! Over

tightening the restraints may shatter the glass

which could cause personal injury.

•DONOT carry or transport removed doors by the

handles.

•Fully tighten handle set screws when installing the

door handles.

•Another bullet coming - save space

CAUTION

•Use an appliance dolly when moving refrigerator.

ALWAYS truck refrigerator from its side or

back–NEVER from its front.

•Protect outside finish of refrigerator during transport

by wrapping cabinet in blankets or inserting padding

between the refrigerator and dolly.

•Secure refrigerator to dolly firmly with straps or

bungee cords. Thread straps through handles when

possible. Do not overtighten. Overtightening

restraints may dent or damage outside finish.

To Disconnect the Water Line:

•Push in white collar (A) and hold.

•Pull the door-side tube from the connector (B).

To Reconnect the Water Line:

•Firmly push tube 5⁄8” into the connector. Use

lines on the tube as a guide for full insertion.

•If tube end is damaged, cut off 5⁄8” before

reconnecting.

•If leaking occurs,

reconnect the line.

3. Close doors.

4. Remove top hinge covers by

removing Phillips screws.

5. Unscrew 5⁄16” hex head screws from

top hinges.

6. For ice and water dispensing

models only: Detach main wire

connector harness.

•Do not remove screw

connecting green ground wire.

•To detach main wire harness,

use a flat blade tool or finger-

nail to press junction point

between two connectors to

release.

7. Remove top hinges along with doors.

INSTALLATION

To avoid severe personal injury or death, observe the

following:

•Disconnect power to refrigerator before removing

doors. Connect power only after replacing doors.

•Green ground wire must be attached to top hinge

while performing door removal and replacement.

•Tape decorative panels (select models) securely

into place before removing door handles.

WARNING

To avoid property damage, observe the following:

•Protect vinyl or other flooring with cardboard,

rugs or other protective material, prior to moving

refrigerator.

•Do not adjust refrigerator to be any shorter than

681⁄2” tall (minus hinge and cap). Doing so may

damage underside components.

CAUTION

Door and Hinge Removal

Some installations require door removal to get

refrigerator to final location.

1. Unplug power cord from power source.

2. Remove toe grille and bottom hinge covers (see

page 9).

•Open both doors 180°, or as wide as possible.

For ice and water dispensing models only:

Remove the left side hinge cover by carefully

pulling the water line to pry the cover loose. Then

continue to maintain downward pressure to the

notched side of the cover while swinging it off

(see page 9). 8. Remove bottom hinges with a 3⁄8” hex head driver.

Replacing the Doors

•To replace the doors, follow the steps in Door and

Hinge Removal in reverse order.

IMPORTANT: If water line tube end is damaged, cut

off 5⁄8” before reconnecting.

Note

•For refrigerators in operation, shut off water before

removing water line from the door.

INSTALLATION

1. Create service loop with copper

tubing (minimum 2' diameter).

Avoid kinks in the copper tubing

when bending the service loop.

Do not use plastic tubing.

2. Remove plastic cap from water valve

inlet port.

3. Place brass nut (A) and sleeve (B) on

copper tube end as illustrated. (Do not

use old sleeve.) Brass nut (A) and

sleeve (B) are provided

in the refrigerator Use

and Care guide packet.

4. Place end of copper

tubing into water valve

inlet port. Shape tubing

slightly. Do not kink – so that tubing

feeds straight into inlet port.

5. Slide brass nut over sleeve and screw nut

into inlet port. Tighten nut with wrench.

IMPORTANT: Do not overtighten. Cross

threading may occur.

6. Pull on tubing to confirm connection is

secure. Connect tubing to frame with

water tubing clamp (C) and turn on

water supply. Check for leaks and

correct if necessary. Continue to observe

the water supply connection for two to

three hours prior to moving the

refrigerator to its permanent location.

7. Monitor water connection for 24 hours.

Correct leaks, if necessary.

2' diameter

minimum

Materials Needed

•1⁄4” outer diameter flexible copper tubing

•Shut-off valve (requires a 1⁄4” hole to be drilled into

water supply line before valve attachment)

•Adjustable wrench

•1⁄4” hex nut driver

Note

•Add 8' to tubing length needed to reach water

supply for creation of service loop.

Connecting the Water Supply

(select models)

To avoid property damage or possible injury,

follow basic precautions, including the

following:

•Consult a plumber to connect 1⁄4” O.D. copper

tubing to household plumbing to assure

compliance with local codes and ordinances.

•Confirm water pressure to water valve is between

35 and 100 pounds per square inch, 20 pounds

per square inch without filter.

•Do not use a self-piercing, or 3⁄16” saddle valve.

Both reduce water flow can become clogged over

time, and may cause leaks if repair is attempted.

•Wait two to three hours before placing refrigerator

into final position to check and correct any water

leaks. Recheck for leaks after 24 hours.

•Verify the copper tubing under the sleeve is

smooth and free from defects. Do not reuse an old

sleeve.

CAUTION

To reduce risk of injury or death, follow basic

precautions, including the following:

•Read all instructions before installing ice maker.

•Do not attempt installation if instructions are not

understood or if they are beyond personal skill

level.

•Observe all local codes and ordinances.

•Do not service ice maker unless specifically

recommended in Use & Care Guide or published

user-repair instructions.

•Disconnect power to refrigerator before installing

ice maker.

•Water damage due to an improper water

connection may cause mold/mildew growth. Clean

up spills or leakage immediately.

WARNING

INSTALLATION

Handle Installation

If not installed, the handle is located in the interior or

attached to the back of your refrigerator. Remove and

discard handle packaging and tape.

Handle design varies from refrigerator to refrigerator.

Please reference the appropriate instructions for your

model.

Front Mount Handle

Materials Needed

•Gloves to protect hands

•Phillips screwdriver

•Plastic door removal card (or 1⁄32” thick plastic card),

retain the card for future use.

To Install:

1. The handles are to be oriented

as shown.

2. Align front mount door handle

clip with the door tabs.

3. Ensure the handle clips are

positioned slightly above the

door tabs.

4. Rotate the handle so that the

handle is flat against the door.

5. Push the handle down against the

upper door tab just enough to allow

it to hang unsupported.

Handle

Clip

Door

Tab

6. Align bottom of handle with lower

door tab. Press upper handle end to

door surface and firmly grasp lower

end of handle. Gently slide handle

upward until bottom of handle settles

on door surface, then reverse

direction, sliding downward to almost

engaging tab with clip.

7. Grasp the handle firmly and slide

down until it clicks. The audible click

indicates fastening clips are securely

interlocked.

2. Grasp the lower part of the handle

firmly and lift to remove.

To Remove:

1. Flex the handle away from the door

panel. Simultaneously place door

handle removal card underneath

the base of the lower handle. Insert

the card to the line or until it stops.

INSTALLATION

2. Align notches on back of handle

with retaining clips on doors.

Insert clips into notches and

slide handle down until it

contacts bottom trim.

3. Replace top door trim and Phillips

screws.

4. Repeat instructions 1-3 to install

other handle.

To avoid possible injury and damage to property,

tape decorative panels (select models) securely into

place before removing door handles.

WARNING

To Remove:

1. Release top door trim (select models)

by removing Phillips screws from top

of fresh food door and retain screws

for later use.

2. Grasp handle firmly with both

hands. Slide handle upward

approximately 3⁄4” to release.

3. Repeat instructions 1-2 to

remove other handle.

To Reinstall:

1. Repeat in reverse order.

Door Clip

Handle Extensions (select models)

To Install:

•Align and clip handle extension into position on the

handle. Press the extension over the door retainers.

To Remove:

•Slide the extension down and unclip from door

retainer.

Euro Handles

This handle style is installed at the factory.

Materials Needed:

•3⁄32” allen wrench

To Remove:

•Remove set screw from

handle mounting post

using 3⁄32” allen wrench.

•Repeat the procedure on

all posts to remove the

handle.

To Replace:

•Align handle with the mounting posts.

•Fully tighten all set screws to secure handle

in place.

Full-Length Aluminum Handles

To Install:

1. Release top door trim (select models)

by removing Phillips screws from top

of fresh food door and retain screws

for later use.

INSTALLATION

Installing Front-Mounted Handles for

Stainless Steel

1. Loosen lower door clip on door with

1⁄4" hex nut driver.

2. Locate predrilled hole at base of

handle, and fit hollow end of

handle over lower door clip.

3. Fit other end of handle over

upper door clip and slide up as

far as possible.

NOTE: If top of handle does not

fit over top clip, loosen lower clip

further until fit can be

accomplished.

4. Insert 1⁄4" hex nut driver into

predrilled hole at base of handle

to tighten screw. Insert screw

plug into hole, as illustrated.

5. Repeat above steps to install

other handle.

Removing Front-Mounted Handles for

Stainless Steel

1. Remove plastic button plug at

base of handle with a very small

flat-blade screwdriver.

•Insert 1⁄4" hex nut driver into

predrilled hole to remove

screw.

2. Slide handle down and remove

from bottom door clip.

3. Repeat above steps to remove

other handle.

INSTALLATION

Leveling

To protect personal property and refrigerator from

damage, observe the following:

•Protect vinyl or other flooring with cardboard, rugs,

or other protective material.

•Do not use power tools when performing leveling

procedure.

CAUTION

To enhance the appearance and maintain performance,

the refrigerator should be level.

Note

•Complete any required door reversal, panel

installation and/or a water supply connection,

before leveling.

5. Using the carpenter’s level, make sure front of

refrigerator is 1⁄4” (6 mm) or 1⁄2bubble higher than

back of refrigerator and that the refrigerator is level

from side to side.

6. If required, correct rocking of refrigerator by

turning rear adjustment screw clockwise to raise

rocking corner. If doors are uneven, do the

following:

•Determine which

door needs to be

raised.

•Turn front roller

adjustment screw (A)

clockwise to raise

front corner of door.

•If one refrigerator door has reached the limit of

its adjustment range and doors are still not level,

lower the opposite door by turning roller

adjustment screw counterclockwise.

•Check with level to verify 1⁄4” tilt to the back for

proper door closure.

•If refrigerator is aligned and stable, replace toe

grille and hinge covers.

7. Replace hinge cover(s).

•Position cover into the outer edge of the hinge.

•Swing the cover toward the cabinet and snap it

into place.

8. Replace the toe grille.

4. Turn both rear adjustment screws (B) clockwise to

raise and counterclockwise to lower the rear of the

refrigerator.

Materials Needed

•3⁄8” hex head driver

•Carpenter’s level

1. Remove toe grille.

•Grasp firmly and pull bottom

outward to unclip.

2. Remove bottom hinge cover(s).

•Place the eraser end of a pencil or similar blunt

tool in the cover notch.

Notch

Location

•Use slight pressure to pry the

cover loose.

•Continue to maintain

downward pressure to the

notched side of the cover while

swinging it off.

3. Using hex head driver, turn both of the front

adjustment screws (A) clockwise to raise and

counterclockwise to lower the front of the

refrigerator.

Note

•For proper reinstallation, ensure the “top” marking

on the interior of the toe grille is oriented correctly.

•Align the toe grille mounting clips with the lower

cabinet slots.

•Push the toe grille firmly until it snaps into place.

Inhaltsverzeichnis

Andere Jenn-Air Kühlschrank Handbücher

Jenn-Air

Jenn-Air JRT199 Bedienungsanleitung

Jenn-Air

Jenn-Air JS42SEDUDB01 Bedienungsanleitung

Jenn-Air

Jenn-Air JUR248RYEP Bedienungsanleitung

Jenn-Air

Jenn-Air JFX2897DRM Bedienungsanleitung

Jenn-Air

Jenn-Air JUR248RBES Bedienungsanleitung

Jenn-Air

Jenn-Air JCD2595WES00 Bedienungsanleitung

Jenn-Air

Jenn-Air RISE JB36NXFXLE Merkblatt

Jenn-Air

Jenn-Air JUCFP242HL11 Bedienungsanleitung

Jenn-Air

Jenn-Air JRSD2490 Bedienungsanleitung

Jenn-Air

Jenn-Air JFFCC72EHL Bedienungsanleitung

Jenn-Air

Jenn-Air JCD2395WES01 Bedienungsanleitung

Jenn-Air

Jenn-Air JUD278DBCX00 Bedienungsanleitung

Jenn-Air

Jenn-Air JFC2089HT Benutzerhandbuch

Jenn-Air

Jenn-Air JFC2089BEP Bedienungsanleitung

Jenn-Air

Jenn-Air JCD2591WES00 Bedienungsanleitung

Jenn-Air

Jenn-Air JCB2587WEF00 Bedienungsanleitung

Jenn-Air

Jenn-Air JFC2290VEP10 Bedienungsanleitung

Jenn-Air

Jenn-Air JRS203 Bedienungsanleitung

Jenn-Air

Jenn-Air 36" Bedienungsanleitung

Jenn-Air

Jenn-Air 12642718 Bedienungsanleitung

Jenn-Air

Jenn-Air JFC2290VTB10 Bedienungsanleitung

Jenn-Air

Jenn-Air JCB2585WES Bedienungsanleitung

Jenn-Air

Jenn-Air JFI2089ATS2 Bedienungsanleitung

Jenn-Air

Jenn-Air EDR3RXD1B Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung